Intel Arc Pro B70 vs Intel Graphics 24EU Mobile Comparison

Head-to-Head Benchmarks

The database contains no benchmark scores for either the Intel Arc Pro B70 or the Intel Graphics 24EU Mobile. Both GPUs register an average benchmark score of zero, with no recorded entries in the head-to-head benchmark table. Consequently, no direct performance comparisons can be made from the available measurements. The percentile ranking for both parts sits at 50, indicating they fall in the middle of the distribution when compared to all GPUs in the database, but this figure does not reflect any tested workload because there are no actual scores to rank.

Without recorded frame rates, compute scores, or synthetic test results, the analysis must rely entirely on architectural specifications and theoretical throughput calculations. The Arc Pro B70 delivers a theoretical FP32 performance of 22.94 TFLOPS, while the Graphics 24EU Mobile achieves 384.0 GFLOPS. This represents a 59.7x difference in raw floating-point throughput, but this figure is derived from clock speeds and shading unit counts, not from any benchmark run. The texture rate for the Arc Pro B70 is 716.8 GTexel/s versus 12.00 GTexel/s for the mobile part, a 59.7x difference. Pixel throughput shows a similar gap: 358.4 GPixel/s versus 4.000 GPixel/s, which is 89.6x higher on the Arc Pro B70.

The absence of benchmark data means the head-to-head comparison is purely theoretical. The Arc Pro B70's memory bandwidth of 608.0 GB/s from its 256-bit GDDR6 interface stands against the Graphics 24EU Mobile's system-shared memory with bandwidth described only as "System Dependent." The mobile GPU has no dedicated VRAM, relying entirely on the host system's memory, which introduces variability that cannot be quantified from the database.

Where Each One Wins

The Arc Pro B70 is positioned for workloads that demand substantial compute resources. Its 4096 shading units, 256 texture mapping units, and 128 render output units provide the hardware foundation for heavy graphics workloads. The GPU includes 32 ray tracing cores, enabling hardware-accelerated ray tracing operations. The 32 GB GDDR6 memory capacity with a 256-bit bus width supports large datasets and high-resolution textures. The 22.94 TFLOPS FP32 throughput and 45.88 TFLOPS FP16 performance (2:1 ratio) indicate capability for compute-heavy applications such as rendering, simulation, and machine learning inference.

The Graphics 24EU Mobile is a low-power integrated graphics solution. Its 192 shading units and 12 TMUs operate at a base clock of 300 MHz with a 1000 MHz boost. The 6 W TDP classifies it as an energy-efficient part designed for basic display output and light 2D workloads. Its 384.0 GFLOPS FP32 and 768.0 GFLOPS FP16 performance suffice for desktop compositing, video playback, and casual applications. The absence of dedicated ray tracing cores means any ray tracing workload would fall back to software implementations. The system-shared memory architecture means performance scales with the host platform's memory speed and capacity, which the database records as "System Dependent."

The Arc Pro B70 uses the Xe2-HPG architecture on a 5 nm process from TSMC, while the Graphics 24EU Mobile uses the Xe-LP architecture on Intel's 10 nm process. The Arc Pro B70's die size is 368 mm², whereas the mobile part's die size is listed as unknown. The Arc Pro B70 supports PCIe 5.0 x16, providing substantial bandwidth for data transfer, while the mobile GPU connects via Ring Bus, which is typical for integrated graphics.

The Verdict

The data supports a clear separation of use cases. The Intel Arc Pro B70 targets professional graphics and compute environments requiring high throughput, large memory capacity, and dedicated hardware features. Its 230 W TDP and dual-slot form factor with a 1x 8-pin power connector indicate a discrete add-in card designed for workstation-class systems. The suggested PSU of 550 W confirms substantial power delivery requirements. The 32 GB GDDR6 memory and 608.0 GB/s bandwidth accommodate large models, high-resolution textures, and complex scenes. The 32 ray tracing cores and DirectX 12 Ultimate (12_2) support enable modern graphics features.

The Intel Graphics 24EU Mobile serves as an integrated GPU for portable devices. Its 6 W TDP and IGP slot width mean it draws power from the host processor rather than a dedicated power connector. The Ring Bus interface ties it to the CPU's memory controller. This part handles everyday display tasks, video decoding, and light productivity work. Its 4.000 GPixel/s pixel rate and 12.00 GTexel/s texture rate provide sufficient throughput for 2D interfaces and basic 3D acceleration. The DirectX 12 (12_1) support indicates compatibility with modern APIs but with fewer features than the Arc Pro B70's 12_2 implementation.

Users requiring professional-grade compute, large memory buffers, or ray tracing capabilities should select the Arc Pro B70. Users needing a low-power integrated solution for mobile devices should select the Graphics 24EU Mobile. The 59.7x difference in FP32 throughput and 89.6x difference in pixel rate demonstrate the scale of performance separation, though these figures represent theoretical maxima rather than measured results. Both GPUs share the same OpenGL 4.6 and Vulkan 1.4 API support, indicating similar driver-level feature sets despite their different architectures.

FAQ

Q: What is the difference in shading units between the two GPUs?

A: The Intel Arc Pro B70 has 4096 shading units, while the Intel Graphics 24EU Mobile has 192 shading units. This is a 21.3x difference in the number of programmable shader processors.

Q: Do both GPUs support hardware ray tracing?

A: No. The Intel Arc Pro B70 includes 32 ray tracing cores. The Intel Graphics 24EU Mobile lists no ray tracing cores, meaning it lacks dedicated hardware for this task.

Q: What memory configurations do these GPUs use?

A: The Arc Pro B70 uses 32 GB of GDDR6 memory on a 256-bit bus with 608.0 GB/s bandwidth. The Graphics 24EU Mobile uses system-shared memory with a system-dependent bandwidth and no dedicated VRAM.

Q: How do their power requirements compare?

A: The Arc Pro B70 has a 230 W TDP and requires a 550 W suggested power supply with a 1x 8-pin power connector. The Graphics 24EU Mobile has a 6 W TDP, requires no power connector, and has no suggested PSU rating.

Q: Which GPU supports a newer DirectX version?

A: The Arc Pro B70 supports DirectX 12 Ultimate (12_2), while the Graphics 24EU Mobile supports DirectX 12 (12_1). Both support OpenGL 4.6 and Vulkan 1.4.

Q: What is the release timeline for these products?

A: The Intel Graphics 24EU Mobile has a release date of 2024-12-31, while the Intel Arc Pro B70 has a release date of 2026-03-25. The Arc Pro B70 has a launch MSRP of 949 USD.

Architecture Differences

The Intel Arc Pro B70 uses the Xe2-HPG architecture, built on TSMC's 5 nm process node. The chip is designated BMG-G31 and belongs to the Battlemage (Pro Series) generation. The die size measures 368 mm². The architecture supports 4096 shading units organized with 256 TMUs and 128 ROPs. The GPU includes 32 dedicated ray tracing cores. The memory subsystem uses GDDR6 with a 256-bit bus width, running at 2375 MHz with 19 Gbps effective speed, producing 608.0 GB/s bandwidth. The pixel rate is 358.4 GPixel/s, and the texture rate is 716.8 GTexel/s. FP32 throughput is 22.94 TFLOPS, with FP16 at 45.88 TFLOPS via 2:1 ratio.

The Intel Graphics 24EU Mobile uses the Xe-LP architecture, fabricated on Intel's 10 nm process. The chip is designated Twin Lake and belongs to the HD Graphics-T (Twin Lake) generation. The die size is unknown. The GPU has 192 shading units, 12 TMUs, and 4 ROPs. No ray tracing cores are present. Memory is system-shared with system-dependent bandwidth. The base clock is 300 MHz with a 1000 MHz boost. Pixel rate is 4.000 GPixel/s, and texture rate is 12.00 GTexel/s. FP32 throughput is 384.0 GFLOPS, with FP16 at 768.0 GFLOPS via 2:1 ratio.

The two architectures target different segments. Xe2-HPG is a high-performance graphics architecture with dedicated ray tracing and large memory interfaces. Xe-LP is a low-power architecture optimized for integrated use in portable devices. The 5 nm TSMC process versus Intel's 10 nm process reflects different manufacturing priorities. The Arc Pro B70's 368 mm² die size indicates a large, complex chip, while the Graphics 24EU Mobile's die size remains unspecified.

Specification Differences

The table below lists only the fields where the two GPUs differ according to the database.

| Specification | Intel Arc Pro B70 | Intel Graphics 24EU Mobile |

|---|---|---|

| Chip | BMG-G31 | Twin Lake |

| Architecture | Xe2-HPG | Xe-LP |

| Generation | Battlemage (Pro Series) | HD Graphics-T (Twin Lake) |

| Process Node | 5 nm | 10 nm |

| Foundry | TSMC | Intel |

| Die Size | 368 mm² | unknown |

| Base Clock | 2280 MHz | 300 MHz |

| Boost Clock | 2800 MHz | 1000 MHz |

| Memory Clock | 2375 MHz 19 Gbps effective | System Shared |

| Memory Size | 32 GB | System Shared |

| Memory Type | GDDR6 | System Shared |

| Memory Bus Width | 256 bit | System Shared |

| Memory Bandwidth | 608.0 GB/s | System Dependent |

| Shading Units | 4096 | 192 |

| TMUs | 256 | 12 |

| ROPs | 128 | 4 |

| Ray Tracing Cores | 32 | null |

| Pixel Rate | 358.4 GPixel/s | 4.000 GPixel/s |

| Texture Rate | 716.8 GTexel/s | 12.00 GTexel/s |

| FP32 | 22.94 TFLOPS | 384.0 GFLOPS |

| FP16 | 45.88 TFLOPS (2:1) | 768.0 GFLOPS (2:1) |

| TDP | 230 W | 6 W |

| Slot Width | Dual-slot | IGP |

| Power Connectors | 1x 8-pin | null |

| Suggested PSU | 550 W | null |

| Bus Interface | PCIe 5.0 x16 | Ring Bus |

| Display Outputs | 1x HDMI 2.1a, 3x DisplayPort 2.1 | Portable Device Dependent |

| DirectX | 12 Ultimate (12_2) | 12 (12_1) |

| Dimensions | 267 mm length, 110 mm height, 39 mm width | null |

| Production Status | null | Active |

| Release Date | 2026-03-25 | 2024-12-31 |

| Launch MSRP | 949 USD | null |

Both GPUs share the same manufacturer (Intel), OpenGL version (4.6), Vulkan version (1.4), and unknown transistor counts. The Arc Pro B70 has no recorded production status, while the Graphics 24EU Mobile is listed as Active. The Arc Pro B70's dimensions specify a 267 mm length, 110 mm height, and 39 mm width, while the mobile GPU has no recorded dimensions.