Intel Graphics 24EU Mobile vs NVIDIA GeForce RTX 4060 Comparison

The Intel Graphics 24EU Mobile is an integrated graphics solution from Intel, built on the Twin Lake chip and Xe-LP architecture. The NVIDIA GeForce RTX 4060 is a discrete graphics card from NVIDIA, based on the AD107 chip and Ada Lovelace architecture. The database contains no direct head-to-head benchmark runs between these two products, but the recorded performance data for the RTX 4060 provides a basis for comparison against the Intel part, which has no benchmark scores listed.

Head-to-Head Benchmarks

The database shows zero recorded benchmark scores for the Intel Graphics 24EU Mobile. Its average benchmark score is 0, and its percentile ranking among all GPUs is 50. The RTX 4060, in contrast, has ten individual benchmark entries and an average score of 17,639.

The RTX 4060’s strongest recorded result is in Geekbench OpenCL, where it scores 95,057. Its Geekbench Vulkan score is 48,643. In 3DMark Steel Nomad DX12, the RTX 4060 scores 2,302. Passmark results for the RTX 4060 include a G3D score of 19,545, a GPU Compute score of 9,213, a G2D score of 1,037, a DirectX 9 score of 236, a DirectX 10 score of 103, a DirectX 11 score of 175, and a DirectX 12 score of 76.

The nearest rivals to the RTX 4060 in the database are all AMD products: the Radeon HD 7790 with an average score of 17,666 and a delta of -0.2 percent, the Radeon 780M with 17,588 and a delta of 0.3 percent, the Radeon Pro 560 with 17,551 and a delta of 0.5 percent, and the Radeon Pro 460 with 17,509 and a delta of 0.7 percent. These deltas indicate the RTX 4060 sits within one percent of these rivals, with the HD 7790 marginally ahead and the three Radeon parts marginally behind.

The RTX 4060’s percentile ranking among all GPUs is 61, which places it above the midpoint of the database. The Intel part’s percentile of 50 with zero scores means it has no measurable performance data to compare directly. The absolute gap in compute throughput is stark: the RTX 4060 delivers 15.11 TFLOPS of FP32 performance, while the Intel part delivers 384.0 GFLOPS. That is a factor of roughly 39 times higher FP32 throughput for the NVIDIA card.

Texture and pixel rates follow the same pattern. The RTX 4060 achieves 236.2 GTexel/s and 118.1 GPixel/s. The Intel Graphics 24EU Mobile achieves 12.00 GTexel/s and 4.000 GPixel/s. The RTX 4060’s texture rate is approximately 19.7 times higher, and its pixel rate is approximately 29.5 times higher.

FP16 performance also diverges sharply. The RTX 4060 processes FP16 at 15.11 TFLOPS with a 1:1 ratio to FP32. The Intel part processes FP16 at 768.0 GFLOPS with a 2:1 ratio, meaning half the rate of its FP32 output. The NVIDIA card’s FP16 throughput is roughly 19.7 times greater.

FAQ

Q: Does the database show any benchmark scores for the Intel Graphics 24EU Mobile?

A: No. The Intel part has an empty benchmarks array, an average benchmark score of 0, and no nearest rivals listed. The RTX 4060 has ten recorded scores across Geekbench, 3DMark, and Passmark tests.

Q: What is the RTX 4060’s best and worst benchmark result?

A: The best result is 95,057 in Geekbench OpenCL. The worst result is 76 in Passmark DirectX 12. Its Passmark G3D score of 19,545 is the highest among the Passmark suite entries.

Q: How does the RTX 4060 compare to its closest AMD rivals?

A: The RTX 4060’s average score of 17,639 is 0.2 percent below the AMD Radeon HD 7790, 0.3 percent above the AMD Radeon 780M, 0.5 percent above the AMD Radeon Pro 560, and 0.7 percent above the AMD Radeon Pro 460.

Q: What is the memory configuration of each product?

A: The RTX 4060 uses 8 GB of GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth. The Intel Graphics 24EU Mobile uses System Shared memory with a System Shared bus width, and its bandwidth is listed as System Dependent.

Q: Which product has a higher pixel rate?

A: The RTX 4060 has a pixel rate of 118.1 GPixel/s. The Intel Graphics 24EU Mobile has a pixel rate of 4.000 GPixel/s. The RTX 4060 is about 29.5 times higher.

Q: Are both products still in production?

A: No. The Intel Graphics 24EU Mobile has an Active production status. The NVIDIA GeForce RTX 4060 has an End-of-life production status.

Architecture Differences

The Intel Graphics 24EU Mobile uses the Xe-LP architecture on a 10 nm process node, fabricated by Intel. Its chip is Twin Lake. The RTX 4060 uses the Ada Lovelace architecture on a 5 nm process node, fabricated by TSMC. Its chip is AD107.

The RTX 4060 has 18,900 million transistors on a 159 mm² die, giving a transistor density of 118.9M per mm². The Intel part’s transistor count and die size are listed as unknown, so no density figure can be derived.

The RTX 4060 includes dedicated hardware for ray tracing and tensor operations. It has 24 RT cores and 96 tensor cores. The Intel Graphics 24EU Mobile lists no RT cores and no tensor cores, meaning it lacks dedicated ray tracing and AI acceleration hardware of the type found in the NVIDIA part.

Shader organization differs significantly. The RTX 4060 has 3,072 shading units, 96 texture mapping units, and 48 raster output pipelines. The Intel Graphics 24EU Mobile has 192 shading units, 12 TMUs, and 4 ROPs. The RTX 4060 has 16 times more shaders, 8 times more TMUs, and 12 times more ROPs.

The FP16 execution ratio also differs. The RTX 4060 runs FP16 at a 1:1 ratio with FP32, meaning full-rate FP16 throughput. The Intel part runs FP16 at a 2:1 ratio, meaning half-rate FP16 throughput relative to FP32. This architectural choice affects compute workloads that can use FP16.

The bus interface differs. The RTX 4060 uses PCIe 4.0 x8. The Intel Graphics 24EU Mobile uses a Ring Bus interface, which is typical for integrated graphics tied to the processor.

The RTX 4060 supports DirectX 12 Ultimate (12_2), while the Intel part supports DirectX 12 (12_1). Both support OpenGL 4.6 and Vulkan 1.4. The DirectX 12_2 feature level includes additional capabilities such as mesh shaders and variable rate shading, which are not present in the 12_1 feature level.

Specification Differences

The RTX 4060 has a base clock of 1830 MHz and a boost clock of 2460 MHz. The Intel Graphics 24EU Mobile has a base clock of 300 MHz and a boost clock of 1000 MHz. The NVIDIA card’s boost clock is 2.46 times higher.

Memory differs completely. The RTX 4060 has 8 GB of GDDR6 on a 128-bit bus with 272.0 GB/s bandwidth. The Intel part uses System Shared memory with System Shared type and bus width, and bandwidth is System Dependent. The memory clock for the RTX 4060 is 2125 MHz with 17 Gbps effective. The Intel part’s memory clock is System Shared.

The RTX 4060 has a TDP of 115 W. The Intel Graphics 24EU Mobile has a TDP of 6 W. The slot width also differs: the RTX 4060 is Dual-slot, while the Intel part is IGP (integrated graphics processor).

Power connectors differ. The RTX 4060 uses 1x 12-pin connector and has a suggested PSU of 300 W. The Intel part has no power connectors listed, consistent with an integrated solution drawing power from the motherboard.

Display outputs differ. The RTX 4060 provides 1x HDMI 2.1 and 3x DisplayPort 1.4a. The Intel part lists Portable Device Dependent outputs, meaning outputs vary by the device it is integrated into.

Physical dimensions are only available for the RTX 4060: 240 mm in length (9.4 inches), 111 mm in height (4.4 inches), and 40 mm in width (1.6 inches). The Intel part has no dimensions listed.

The RTX 4060 has a launch MSRP of 299 USD. The Intel part has no launch MSRP listed.

The RTX 4060 has a predecessor in GeForce 30 and a successor in GeForce 50. The Intel part has no predecessor or successor listed. The RTX 4060’s release date is 2023-05-17, while the Intel part’s release date is 2024-12-31.

The RTX 4060 has a production status of End-of-life. The Intel Graphics 24EU Mobile has a production status of Active.

The Verdict

The data shows a complete separation in performance capability. The RTX 4060 delivers 15.11 TFLOPS FP32, 236.2 GTexel/s texture rate, and 118.1 GPixel/s pixel rate. The Intel Graphics 24EU Mobile delivers 384.0 GFLOPS FP32, 12.00 GTexel/s, and 4.000 GPixel/s. These are not close figures; the NVIDIA part holds roughly a 20 to 30 times advantage across these metrics.

The RTX 4060 has a measurable benchmark profile with an average score of 17,639 and a percentile of 61. It sits within one percent of four AMD rivals, which indicates its performance class. The Intel part has no recorded benchmark scores, placing it at percentile 50 with an average of 0. The absence of data means the Intel part cannot be positioned against any rivals in the database.

The RTX 4060 includes hardware features that the Intel part lacks. It has 24 RT cores, 96 tensor cores, 8 GB of dedicated GDDR6 memory with 272.0 GB/s bandwidth, and support for DirectX 12 Ultimate. The Intel part has no RT cores, no tensor cores, System Shared memory, and DirectX 12 (12_1) support. These differences matter for workloads that use ray tracing, AI acceleration, or high-bandwidth local memory.

The RTX 4060 uses a 5 nm process from TSMC with 18,900 million transistors. The Intel part uses a 10 nm process from Intel with unknown transistor count. The process node advantage contributes to the RTX 4060’s higher clock speeds and compute throughput.

The RTX 4060 is a dual-slot card with a 115 W TDP and requires a 300 W suggested PSU. The Intel Graphics 24EU Mobile is an integrated solution with a 6 W TDP and no power connector. The power draw difference is a factor of 19.2, which reflects the distinct deployment scenarios: discrete expansion card versus processor-integrated graphics.

The RTX 4060 is end-of-life, while the Intel part is active. The RTX 4060’s release date of 2023-05-17 precedes the Intel part’s release date of 2024-12-31. The RTX 4060 has a clear generational lineage with GeForce 30 as predecessor and GeForce 50 as successor.

For any workload that requires measurable 3D rendering, compute, or gaming performance, the RTX 4060 is the only option with recorded data to support its capability. The Intel Graphics 24EU Mobile offers integrated simplicity with a 6 W TDP, but its performance metrics are orders of magnitude lower. The database records no benchmark evidence for the Intel part, so its real-world performance cannot be quantified from this data.

The RTX 4060’s nearest rivals are all AMD products, and its average score of 17,639 places it in the same performance band as the Radeon HD 7790, 780M, Pro 560, and Pro 460. The Intel part has no rivals listed because it has no scores.

The RTX 4060 supports DirectX 12 Ultimate, a higher feature level than the Intel part’s DirectX 12 (12_1). Both products support OpenGL 4.6 and Vulkan 1.4, so API compatibility is similar outside of DirectX.

The RTX 4060 is the only product of the two with a documented benchmark history, a specified memory subsystem, and a defined physical footprint. The Intel Graphics 24EU Mobile is a low-power integrated GPU with a fraction of the compute resources, no benchmark scores, and no memory specification beyond System Shared.

The data does not support any scenario where the Intel part outperforms the RTX 4060. Every measurable specification favors the NVIDIA card. The choice between these products is therefore determined by system design: an integrated solution with minimal power draw versus a discrete card with high performance and corresponding power requirements.