AMD Radeon RX 9060 XT LP vs Intel Arc 140V Mobile Comparison

Head-to-Head Benchmarks

The recorded benchmark data for these two parts is limited but revealing. The AMD Radeon RX 9060 XT LP has two benchmark results in the database: a Geekbench OpenCL score of 88183 and a Geekbench Vulkan score of 39476. The Intel Arc 140V Mobile has no recorded benchmark scores, which places it at a percentile rank of 50 among all GPUs, while the AMD part sits at the 89th percentile.

The average benchmark score for the RX 9060 XT LP is 63830, which places it in a tight cluster of comparable GPUs. Its nearest rival, the NVIDIA CMP 30HX, scores 63842, essentially identical with a delta of 0 percent. The AMD Radeon RX 7600M trails by a hair at 63775, a delta of 0.1 percent. The AMD Radeon Pro Vega 56 scores 63693, another 0.2 percent behind. The AMD Radeon Pro WX 9100 sits slightly ahead at 64212, giving it a delta of -0.6 percent relative to the RX 9060 XT LP. This indicates the RX 9060 XT LP delivers performance squarely in the mid-range GPU segment, with no single rival in its immediate vicinity pulling ahead by more than a fraction of a percent.

Because the Intel Arc 140V Mobile has no benchmark entries, the database cannot produce a head-to-head comparison based on measured scores. The absence of data is itself meaningful: the RX 9060 XT LP has validated performance results, while the Arc 140V Mobile does not. The OpenCL result of 88183 for the AMD part is more than double its own Vulkan result of 39476, showing a significant API-dependent performance spread. The Vulkan score still exceeds the average score of its nearest rivals, which all cluster near 63830, confirming that even the weaker of the two AMD results is competitive with the surrounding field.

Architecture Differences

The AMD Radeon RX 9060 XT LP uses the Navi 44 chip built on RDNA 4.0 architecture, fabricated on a 4 nm process at TSMC. It belongs to the Navi IV (RX 9000) generation. The Intel Arc 140V Mobile uses the Lunar Lake chip with Xe2-LPG architecture, fabricated on a 3 nm process at TSMC, and belongs to the Arc Graphics-M (Lunar Lake) generation. Both parts share the same DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4 API support, but their internal designs differ substantially.

The RX 9060 XT LP packs 29,700 million transistors on a 199 mm² die, yielding a transistor density of 149.2 million per square millimeter. The Arc 140V Mobile has an unknown transistor count but a smaller 172 mm² die. The AMD part is a discrete dual-slot card with a PCIe 5.0 x16 bus interface and a single 8-pin power connector, while the Intel part is an integrated graphics processor with an IGP bus interface and no power connector. The power envelope tells the story: the RX 9060 XT LP has a 140 W TDP and suggests a 300 W power supply, while the Arc 140V Mobile has a 37 W TDP and no suggested PSU.

The AMD GPU has 2048 shading units, 128 texture mapping units, 64 raster operation units, and 32 ray tracing cores. The Intel GPU has half the shading units at 1024, 64 TMUs, 32 ROPs, and 8 ray tracing cores. The RX 9060 XT LP also carries dedicated 16 GB GDDR6 memory on a 128-bit bus with 322.3 GB/s of bandwidth, while the Arc 140V Mobile uses system shared memory with system dependent bandwidth. The AMD part boosts to 3050 MHz with a 2450 MHz game clock, whereas the Intel part boosts to 1950 MHz from a 300 MHz base. The AMD card has no launch MSRP recorded, so no pricing information is available for either part.

FAQ

Q: Which GPU has the higher average benchmark score?

A: The AMD Radeon RX 9060 XT LP has an average benchmark score of 63830, while the Intel Arc 140V Mobile has no recorded benchmark scores and an average score of 0.

Q: How does the RX 9060 XT LP compare to its closest rivals?

A: The RX 9060 XT LP sits within 0.6 percent of all four nearest rivals. The NVIDIA CMP 30HX is 0 percent different, the AMD Radeon RX 7600M is 0.1 percent behind, the AMD Radeon Pro Vega 56 is 0.2 percent behind, and the AMD Radeon Pro WX 9100 is 0.6 percent ahead.

Q: What are the memory configurations of these two GPUs?

A: The RX 9060 XT LP has 16 GB of GDDR6 memory on a 128-bit bus with 322.3 GB/s bandwidth. The Arc 140V Mobile uses system shared memory with system dependent bandwidth.

Q: Which GPU has more ray tracing cores?

A: The RX 9060 XT LP has 32 ray tracing cores, quadruple the 8 ray tracing cores in the Arc 140V Mobile.

Q: What is the power consumption difference?

A: The RX 9060 XT LP has a 140 W TDP, while the Arc 140V Mobile has a 37 W TDP. The AMD card requires a 300 W suggested power supply and one 8-pin connector, while the Intel integrated GPU needs neither.

Q: Do both GPUs support the same graphics APIs?

A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Specification Differences

The two GPUs differ across nearly every recorded specification. The process node differs: the RX 9060 XT LP uses 4 nm, while the Arc 140V Mobile uses 3 nm. The die size is 199 mm² for the AMD part versus 172 mm² for the Intel part. The RX 9060 XT LP has 29,700 million transistors, while the Intel chip has an unknown count. Transistor density is 149.2 million per square millimeter for AMD; no density is recorded for Intel.

Clock speeds diverge sharply. The AMD GPU has a 1380 MHz base, 3050 MHz boost, 2450 MHz game clock, and 2518 MHz memory clock (20.1 Gbps effective). The Intel GPU has a 300 MHz base, 1950 MHz boost, no game clock, and system shared memory clock. The RX 9060 XT LP has 16 GB GDDR6 on a 128-bit bus with 322.3 GB/s bandwidth, while the Arc 140V Mobile has system shared memory with system dependent bandwidth. The AMD card uses a PCIe 5.0 x16 interface and a dual-slot form factor with one 8-pin power connector, while the Intel part is an IGP with no slot width, connectors, or suggested PSU. Display outputs differ as well: the RX 9060 XT LP has 1x HDMI 2.1b and 2x DisplayPort 2.1a, while the Arc 140V Mobile has portable device dependent outputs.

Compute resources are heavily lopsided. The RX 9060 XT LP has 2048 shading units, 128 TMUs, 64 ROPs, 32 ray tracing cores, a pixel rate of 195.2 GPixel/s, a texture rate of 390.4 GTexel/s, and 24.99 TFLOPS FP32 with 1:1 FP16. The Arc 140V Mobile has 1024 shading units, 64 TMUs, 32 ROPs, 8 ray tracing cores, a pixel rate of 62.40 GPixel/s, a texture rate of 124.8 GTexel/s, and 3.994 TFLOPS FP32 with 2:1 FP16 at 7.987 TFLOPS. The release dates also differ: the RX 9060 XT LP launched on 2025-12-16, while the Arc 140V Mobile launched on 2024-09-23. The AMD card is in the Radeon RX 9000 series from AMD, while the Intel part is in the Arc Graphics-M (Lunar Lake) generation from Intel. Both are marked as active in production.

The Verdict

The data shows a clear performance hierarchy. The AMD Radeon RX 9060 XT LP delivers validated benchmark results with an 89th percentile rank, while the Intel Arc 140V Mobile has no recorded scores and sits at the 50th percentile. In raw compute, the RX 9060 XT LP produces 24.99 TFLOPS FP32 versus 3.994 TFLOPS for the Arc 140V Mobile, a difference of more than six times. The AMD part has double the shading units, double the TMUs, double the ROPs, four times the ray tracing cores, and dedicated 16 GB GDDR6 memory with 322.3 GB/s bandwidth instead of system shared memory.

The Arc 140V Mobile has advantages in efficiency and integration. Its 37 W TDP is far below the 140 W TDP of the RX 9060 XT LP, and it requires no power connector or separate power supply suggestion. Its 3 nm process node is smaller than the 4 nm node of the AMD part, and its 172 mm² die is smaller than the 199 mm² AMD die. For a mobile integrated solution, the Intel part is designed to operate within a laptop's thermal and power budget. The RX 9060 XT LP is a discrete add-in card with a PCIe 5.0 x16 interface, a dual-slot cooler, and a 300 W suggested PSU, which means it requires a desktop chassis with adequate power delivery.

For users who need maximum graphics throughput, the RX 9060 XT LP is the only choice with measured performance data. For users who need an integrated solution with minimal power draw, the Arc 140V Mobile fits that role, but the database cannot confirm its performance level because no benchmark scores are recorded.

Where Each One Wins

The AMD Radeon RX 9060 XT LP wins in every measured performance category. It has the only benchmark scores in the comparison, with an average of 63830, an OpenCL score of 88183, and a Vulkan score of 39476. It wins on shading units (2048 versus 1024), TMUs (128 versus 64), ROPs (64 versus 32), ray tracing cores (32 versus 8), pixel rate (195.2 GPixel/s versus 62.40 GPixel/s), texture rate (390.4 GTexel/s versus 124.8 GTexel/s), and FP32 throughput (24.99 TFLOPS versus 3.994 TFLOPS). Its 16 GB GDDR6 memory with 322.3 GB/s bandwidth is a decisive advantage for memory-intensive workloads compared to system shared memory with system dependent bandwidth.

The Intel Arc 140V Mobile wins on power efficiency and physical integration. Its 37 W TDP is about one quarter of the AMD part's 140 W TDP. It uses a 3 nm process versus 4 nm, has a smaller die at 172 mm² versus 199 mm², and requires no external power connector, no suggested PSU, and no expansion slot. Its FP16 throughput of 7.987 TFLOPS at 2:1 ratio shows a deliberate design for mixed-precision work within a constrained power envelope, even though its FP32 output is far lower. The Arc 140V Mobile also launched earlier, on 2024-09-23, compared to the RX 9060 XT LP's 2025-12-16 release date.

The RX 9060 XT LP is positioned for desktop use where power delivery and cooling are available. Its nearest rivals all cluster within 0.6 percent of its average score, confirming it competes in a dense mid-range field. The Arc 140V Mobile is positioned for portable devices where the 37 W TDP and IGP form factor are prerequisites. The database records no benchmark scores for the Intel part, so its relative performance cannot be quantified. The choice between them is a choice between a measured discrete GPU with strong compute resources and an unmeasured integrated GPU with a fraction of the power draw.