AMD Radeon RX 9060 XT LP vs NVIDIA GeForce RTX 5090 SE Comparison
AMD Radeon RX 9060 XT LP
GeForce RTX 5090 SE
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9060 XT LP vs NVIDIA GeForce RTX 5090 SE
Head-to-Head Benchmarks
The recorded database contains limited direct comparison data for these two cards. The AMD Radeon RX 9060 XT LP has two benchmark entries, while the NVIDIA GeForce RTX 5090 SE has no recorded benchmark scores in the database. This creates an unusual analytical situation: one card is fully characterized, the other lacks any measured performance points.
The AMD RX 9060 XT LP scores 88,183 in Geekbench OpenCL and 39,476 in Geekbench Vulkan. Its average benchmark score across all recorded tests is 63,830. The RTX 5090 SE shows an average benchmark score of 0, which means the database has no measurements for it. Any direct head-to-head comparison must therefore rely on architectural and specification analysis rather than measured performance deltas.
The AMD card's percentile ranking against all GPUs in the database is 89. This places it well above the median GPU. Its nearest rivals in the database include the NVIDIA CMP 30HX with an average score of 63,842 and a delta of 0 percent, the AMD Radeon RX 7600M at 63,775 with a 0.1 percent delta, the AMD Radeon Pro Vega 56 at 63,693 with a 0.2 percent delta, and the AMD Radeon Pro WX 9100 at 64,212 with a negative 0.6 percent delta. These results show the RX 9060 XT LP sits in a competitive band where the closest alternatives are within a fraction of a percent in either direction.
The RTX 5090 SE carries a percentile ranking of 50, which is the median position. However, this ranking is unsubstantiated by any recorded benchmark scores. The database provides no wins for either card in head-to-head testing, as the field for such comparisons is empty for this pair.
FAQ
Q: Which card has recorded benchmark scores in the database?
A: Only the AMD Radeon RX 9060 XT LP has recorded scores: 88,183 in Geekbench OpenCL, 39,476 in Geekbench Vulkan, and an average benchmark score of 63,830. The NVIDIA GeForce RTX 5090 SE has no benchmark entries and an average score of 0.
Q: How does the RX 9060 XT LP compare to its nearest rivals?
A: The AMD card is statistically tied with the NVIDIA CMP 30HX (63,842 average, 0 percent delta) and the AMD Radeon RX 7600M (63,775, 0.1 percent delta). It trails the AMD Radeon Pro WX 9100 by 0.6 percent and leads the AMD Radeon Pro Vega 56 by 0.2 percent.
Q: What are the memory capacities of the two cards?
A: The RX 9060 XT LP has 16 GB of GDDR6 memory on a 128-bit bus with 322.3 GB/s of bandwidth. The RTX 5090 SE has 24 GB of GDDR7 memory on a 384-bit bus with 1.34 TB/s of bandwidth.
Q: What process nodes do the two cards use?
A: The RX 9060 XT LP uses a 4 nm process at TSMC with 29,700 million transistors on a 199 mm² die. The RTX 5090 SE uses a 5 nm process at TSMC with 92,200 million transistors on a 750 mm² die.
Q: What is the launch MSRP of the RTX 5090 SE?
A: The launch MSRP is 1,499 USD. The RX 9060 XT LP has no recorded launch MSRP in the database.
Q: Which card has a higher boost clock?
A: The RX 9060 XT LP boosts to 3050 MHz, while the RTX 5090 SE boosts to 2377 MHz. The AMD card also has a higher base clock at 1380 MHz versus 1740 MHz for the NVIDIA card, meaning the NVIDIA card's base is higher but its boost is lower.
Architecture Differences
The two cards come from fundamentally different design philosophies. The AMD Radeon RX 9060 XT LP uses the Navi 44 chip built on RDNA 4.0 architecture, part of the Navi IV (RX 9000) generation. The NVIDIA GeForce RTX 5090 SE uses the GB202 chip built on Blackwell 2.0 architecture, part of the GeForce 50 generation. Both are manufactured by TSMC, but on different nodes: 4 nm for AMD and 5 nm for NVIDIA.
The transistor counts reveal the scale difference. The AMD chip packs 29,700 million transistors on a 199 mm² die, yielding a density of 149.2 million transistors per square millimeter. The NVIDIA chip packs 92,200 million transistors on a 750 mm² die, yielding 122.9 million per square millimeter. AMD achieves higher density on its smaller die, while NVIDIA deploys more than three times the total transistor count on a physically much larger chip.
Compute resources diverge sharply. The RX 9060 XT LP has 2,048 shading units, 128 texture mapping units, 64 render output units, and 32 ray tracing cores. It has no tensor cores. The RTX 5090 SE has 14,080 shading units, 440 TMUs, 160 ROPs, 110 RT cores, and 440 tensor cores. The NVIDIA card's tensor core array is a major architectural differentiator, enabling AI-accelerated workloads that the AMD card cannot address through dedicated hardware.
Memory architecture also differs. The AMD card uses GDDR6 memory with a 128-bit bus, while the NVIDIA card uses GDDR7 with a 384-bit bus. The memory clock rates reflect the different types: 2518 MHz with 20.1 Gbps effective for AMD, and 1750 MHz with 28 Gbps effective for NVIDIA. The NVIDIA memory subsystem has a much wider path and higher effective data rate per pin.
Both cards support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Both use PCIe 5.0 x16 interfaces. The AMD card is the predecessor to Navi III, while the NVIDIA card replaces the GeForce 40 series and has a successor in the GeForce 60 series.
Specification Differences
The two cards differ across nearly every measured specification. The RX 9060 XT LP has a boost clock of 3050 MHz and a game clock of 2450 MHz, while the RTX 5090 SE has a boost clock of 2377 MHz and no game clock listed. The AMD card's base clock is 1380 MHz, lower than the NVIDIA card's 1740 MHz.
Pixel and texture throughput show the NVIDIA card's advantage. The RX 9060 XT LP delivers 195.2 GPixel/s and 390.4 GTexel/s. The RTX 5090 SE delivers 380.3 GPixel/s and 1,045.9 GTexel/s. Floating point performance follows the same pattern: 24.99 TFLOPS for AMD versus 66.94 TFLOPS for NVIDIA in both FP32 and FP16, with both cards running 1:1 FP16 to FP32 ratios.
Power requirements differ substantially. The RX 9060 XT LP has a TDP of 140 W and uses a single 8-pin power connector with a suggested 300 W power supply. The RTX 5090 SE has a TDP of 500 W, uses a single 16-pin connector, and requires a suggested 900 W power supply. Both cards are dual-slot designs.
Physical dimensions are only recorded for the NVIDIA card: 267 mm in length, 111 mm in height, and 40 mm in width. The AMD card has no recorded dimensions. Display outputs differ: the AMD card has 1x HDMI 2.1b and 2x DisplayPort 2.1a, while the NVIDIA card has 1x HDMI 2.1b and 3x DisplayPort 2.1b. The NVIDIA card offers one additional DisplayPort output with a newer version number.
Release dates are close: the AMD card launched on 2025-12-16 and the NVIDIA card on 2025-12-31. Both are marked as Active production status. The RX 9060 XT LP has no launch MSRP recorded, while the RTX 5090 SE has a launch MSRP of 1,499 USD.
The Verdict
The data presents a clear split between two cards serving different purposes. The RX 9060 XT LP is a compact, efficient card with measured performance in the database. Its 89th percentile ranking and average score of 63,830 place it in a competitive band with the NVIDIA CMP 30HX and AMD Radeon RX 7600M. The RTX 5090 SE has no recorded benchmark scores, so its 50th percentile ranking cannot be verified from measurements.
On paper, the RTX 5090 SE holds overwhelming specification advantages: more shading units, more memory, wider bus, higher bandwidth, more RT and tensor cores, and roughly 2.7 times the FP32 throughput. The RX 9060 XT LP counters with lower power draw (140 W versus 500 W), a smaller die (199 mm² versus 750 mm²), higher transistor density, and a higher boost clock (3050 MHz versus 2377 MHz). The AMD card also requires a much smaller power supply: 300 W suggested versus 900 W suggested.
The choice depends on whether the workload can use the NVIDIA card's specifications. The RTX 5090 SE's tensor cores and 24 GB of GDDR7 memory target large AI and compute tasks. The RX 9060 XT LP's 16 GB of GDDR6 and lower power envelope suit space-constrained builds with modest power budgets. The database cannot confirm the RTX 5090 SE's actual performance because no benchmarks are recorded for it. Buyers who rely on measured data will find only the AMD card substantiated.
Where Each One Wins
The RX 9060 XT LP wins in efficiency-oriented scenarios. Its 140 W TDP against 500 W means far lower power draw and heat output. The suggested 300 W power supply versus 900 W reduces system power requirements dramatically. The 4 nm process node with 149.2 million transistors per square millimeter shows a denser, more modern manufacturing approach. The higher boost clock of 3050 MHz indicates the AMD card can reach higher peak frequencies in operation.
The RTX 5090 SE wins in raw compute capacity. Its 14,080 shading units versus 2,048 gives it nearly seven times the shader count. The 24 GB memory capacity and 1.34 TB/s bandwidth dwarf the AMD card's 16 GB and 322.3 GB/s. The 440 tensor cores provide dedicated AI acceleration hardware that the AMD card lacks entirely. The 110 RT cores versus 32 suggest stronger ray tracing throughput. The 750 mm² die and 92,200 million transistors represent a much larger, more capable chip.
The RX 9060 XT LP's average benchmark score of 63,830 and 89th percentile ranking give it a verified performance position. The RTX 5090 SE has no such measurements. In the recorded data, only the AMD card has demonstrated performance. The NVIDIA card's specification sheet promises more, but the database contains no evidence of delivered results. The AMD card also offers a lower barrier to entry in terms of power infrastructure, needing only a 300 W power supply and a single 8-pin connector. The RTX 5090 SE requires a 900 W power supply and a 16-pin connector. For systems with limited power delivery or physical space, the RX 9060 XT LP is the practical choice. For workloads that demand maximum compute resources, the RTX 5090 SE's specifications point to higher capability, pending any benchmark data to confirm it.