Intel Arc 140V Mobile vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison
Intel Arc 140V Mobile
GeForce RTX 4060 Ti AD104
Analysis: Intel Arc 140V Mobile vs NVIDIA GeForce RTX 4060 Ti AD104
The Verdict
The recorded data places these two GPUs at opposite ends of the mobile and desktop spectrum. The Intel Arc 140V Mobile is an integrated graphics processor (IGP) built for Lunar Lake laptops, while the NVIDIA GeForce RTX 4060 Ti AD104 is a dual-slot, end-of-life desktop add-in card. The database shows both at the 50th percentile among all GPUs, but that equal percentile masks a massive chasm in raw compute and memory resources. The RTX 4060 Ti AD104 delivers 22.06 TFLOPS of FP32 performance against 3.994 TFLOPS for the Arc 140V, a 5.5x advantage. The Arc 140V is suited for portable, low-power systems where 37 W TDP and system-shared memory are acceptable, whereas the RTX 4060 Ti AD104 is built for sustained desktop rendering with 8 GB of dedicated GDDR6 memory and 288.0 GB/s of bandwidth. There is no scenario in the data where the integrated part replaces the discrete card; they target entirely different physical and thermal envelopes.
Architecture Differences
The two processors share a common foundry, TSMC, but diverge at every other architectural layer. The Intel Arc 140V Mobile uses a 3 nm process node, while the NVIDIA GeForce RTX 4060 Ti AD104 uses a 5 nm node. The Intel chip, codenamed Lunar Lake, employs the Xe2-LPG architecture and belongs to the Arc Graphics-M generation. The NVIDIA part uses Ada Lovelace, the GeForce 40-series architecture, built on the AD104 die. Die size differs substantially: the Intel die measures 172 mm², while the NVIDIA die spans 294 mm². The NVIDIA die contains 35,800 million transistors, a figure the Intel pack lists as unknown, giving the AD104 a transistor density of 121.8M per mm².
Core counts reflect the scale difference. The Arc 140V has 1024 shading units, 64 texture mapping units, 32 raster output pipelines, and 8 ray tracing cores. The RTX 4060 Ti AD104 has 4352 shading units, 136 TMUs, 48 ROPs, 34 ray tracing cores, and 136 tensor cores. The Intel part has no tensor cores listed. Pixel and texture rates follow: the Arc 140V reaches 62.40 GPixel/s and 124.8 GTexel/s, while the RTX 4060 Ti AD104 reaches 121.7 GPixel/s and 344.8 GTexel/s. The NVIDIA card is roughly 2x faster in pixel throughput and 2.76x faster in texture throughput.
Memory architecture is fundamentally different. The Arc 140V uses system-shared memory, with type, bus width, and bandwidth all listed as system dependent. The RTX 4060 Ti AD104 uses 8 GB of GDDR6 on a 128-bit bus, delivering 288.0 GB/s of bandwidth at 2250 MHz, 18 Gbps effective. Clock behavior also differs: the Intel IGP runs at a 300 MHz base and 1950 MHz boost, while the NVIDIA card runs at 2310 MHz base and 2535 MHz boost. The NVIDIA card requires a 450 W suggested PSU and a single 16-pin power connector, whereas the Arc 140V has no power connectors and draws 37 W. The NVIDIA card is a dual-slot, 240 mm long, 111 mm tall, and 40 mm wide unit; the Arc 140V is an IGP with no slot width, length, or dimensions.
Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The NVIDIA card also carries 136 tensor cores, which the Intel part lacks, suggesting a divergence in AI acceleration capabilities. The NVIDIA display outputs are 1x HDMI 2.1 and 3x DisplayPort 1.4a, while the Intel outputs are listed as portable device dependent. The release dates differ: the Arc 140V launched on 2024-09-23, the RTX 4060 Ti AD104 on 2024-03-31. The NVIDIA card is end-of-life, with the GeForce 50 as its successor, while the Arc 140V remains active.
Where Each One Wins
The Intel Arc 140V Mobile wins in power efficiency and integration. At 37 W TDP, it operates within the thermal budget of a thin-and-light laptop, and its integrated nature requires no external power connector or PSU. The 3 nm process node suggests a denser, more energy-efficient transistor design than the 5 nm NVIDIA part. The Arc 140V also offers a newer release date, September 2024 versus March 2024, and remains an active product while the RTX 4060 Ti AD104 is end-of-life. For systems where the GPU must share system memory and fit inside a portable chassis, the data clearly favors the Intel part.
The NVIDIA GeForce RTX 4060 Ti AD104 wins in every raw performance metric recorded. Its FP32 throughput of 22.06 TFLOPS is 5.52x higher than the Arc 140V's 3.994 TFLOPS. Its FP16 throughput of 22.06 TFLOPS (1:1) compares favorably to the Intel's 7.987 TFLOPS (2:1), a 2.76x difference. The NVIDIA card has 4.25x more shading units, 2.125x more TMUs, 1.5x more ROPs, and 4.25x more ray tracing cores. Its dedicated 8 GB GDDR6 memory with 288.0 GB/s bandwidth is not bottlenecked by system memory sharing, whereas the Arc 140V's bandwidth is system dependent with no fixed figure. The NVIDIA card also has tensor cores, 136 of them, which the Intel part does not list at all.
For desktop workloads, the RTX 4060 Ti AD104 is the only viable choice in this comparison. The Arc 140V's 62.40 GPixel/s pixel rate is less than half the NVIDIA's 121.7 GPixel/s, and its texture rate of 124.8 GTexel/s is roughly one-third of the NVIDIA's 344.8 GTexel/s. The NVIDIA card's PCIe 4.0 x8 interface provides a dedicated bus, while the Arc 140V uses an IGP bus interface. The production status alone tells the story: the Intel part is active, the NVIDIA part is end-of-life, but for anyone needing maximum compute, the data points unambiguously to the discrete card.
FAQ
Q: Which GPU has higher raw compute performance?
A: The NVIDIA GeForce RTX 4060 Ti AD104 delivers 22.06 TFLOPS of FP32, which is 5.52x higher than the Intel Arc 140V Mobile's 3.994 TFLOPS. The NVIDIA part also leads FP16 with 22.06 TFLOPS versus 7.987 TFLOPS.
Q: How do their power requirements compare?
A: The Intel Arc 140V Mobile has a 37 W TDP and requires no power connectors, as it is an IGP. The NVIDIA GeForce RTX 4060 Ti AD104 has a 160 W TDP, requires a 1x 16-pin power connector, and needs a 450 W suggested PSU.
Q: What are the memory specifications for each?
A: The Intel Arc 140V Mobile uses system-shared memory, with size, type, bus width, and bandwidth all system dependent. The NVIDIA GeForce RTX 4060 Ti AD104 uses 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth.
Q: Which GPU has more ray tracing cores?
A: The NVIDIA GeForce RTX 4060 Ti AD104 has 34 ray tracing cores. The Intel Arc 140V Mobile has 8 ray tracing cores, which is 4.25x fewer than the NVIDIA part.
Q: Do both GPUs support the same APIs?
A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. However, the NVIDIA part also includes 136 tensor cores, while the Intel part lists none.
Q: What is the production status of each GPU?
A: The Intel Arc 140V Mobile is listed as Active, while the NVIDIA GeForce RTX 4060 Ti AD104 is End-of-life. The NVIDIA card has a successor in the GeForce 50 series, while the Intel part has no successor listed.
Head-to-Head Benchmarks
The head-to-head benchmark array in the database is empty, so the analysis relies on the recorded specification-level performance metrics. The largest single win for the NVIDIA GeForce RTX 4060 Ti AD104 appears in shading unit count: 4352 versus 1024, a 4.25x advantage. This translates directly into the FP32 compute gap of 22.06 TFLOPS against 3.994 TFLOPS. The NVIDIA card's FP32 output is 5.52x higher, meaning the Arc 140V would need to run at full boost for roughly five and a half times as long to complete the same amount of FP32 work.
The texture rate comparison shows a 2.76x lead for NVIDIA: 344.8 GTexel/s versus 124.8 GTexel/s. This gap is driven by the 136 TMUs on the NVIDIA part against 64 on the Intel part, combined with a higher boost clock (2535 MHz versus 1950 MHz). Pixel rate follows a similar pattern, with the NVIDIA card at 121.7 GPixel/s against 62.40 GPixel/s, a 1.95x advantage, despite the NVIDIA part having only 1.5x more ROPs. The higher clock rate narrows the ROP gap somewhat, but the NVIDIA card still wins decisively.
Memory bandwidth is another categorical win for NVIDIA. The 288.0 GB/s figure is fixed and dedicated, whereas the Arc 140V's bandwidth is system dependent with no recorded number. The 8 GB GDDR6 capacity on a 128-bit bus contrasts with the Arc 140V's system-shared memory, which is subject to contention from the CPU and other system components. The NVIDIA card's memory clock of 2250 MHz, 18 Gbps effective, provides a concrete bandwidth figure that the Intel part cannot match.
Ray tracing resources also favor NVIDIA heavily. The 34 RT cores on the RTX 4060 Ti AD104 versus 8 on the Arc 140V represents a 4.25x difference. The NVIDIA card also has 136 tensor cores, which the Intel part does not list, indicating a gap in AI-accelerated workloads. FP16 performance shows NVIDIA at 22.06 TFLOPS (1:1) versus Intel at 7.987 TFLOPS (2:1), meaning the NVIDIA part not only has higher throughput but also does not halve its rate for FP16.
The only recorded metrics where the Intel Arc 140V Mobile leads are process node and TDP. At 3 nm, the Intel part uses a newer process than NVIDIA's 5 nm, and its 37 W TDP is 123 W lower than the NVIDIA card's 160 W. The Arc 140V also launched later, on 2024-09-23 versus 2024-03-31, and remains active while the NVIDIA part is end-of-life. These advantages matter for portable systems, but they do not offset the 5.52x FP32 deficit, the 2.76x texture rate deficit, or the 1.95x pixel rate deficit in any measured performance category. The data shows a clear separation: the Arc 140V is a low-power integrated solution, and the RTX 4060 Ti AD104 is a high-throughput discrete card.