AMD Radeon RX 9060 XT LP vs NVIDIA GeForce RTX 5060 Mobile Comparison
AMD Radeon RX 9060 XT LP
GeForce RTX 5060 Mobile
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9060 XT LP vs NVIDIA GeForce RTX 5060 Mobile
Head-to-Head Benchmarks
The recorded database contains two shared benchmark results for this pair, and both favor the NVIDIA GeForce RTX 5060 Mobile. In Geekbench OpenCL, the AMD Radeon RX 9060 XT LP scores 88,183 points against 96,969 for the NVIDIA part, a 9.1% deficit. That margin is meaningful but not overwhelming; it places the two products in broadly comparable compute territory despite their very different designs. The Vulkan result tells a different story. AMD scores 39,476 points, while NVIDIA reaches 96,451, a 59.1% gap. This is a decisive differential in graphics API performance, and it dominates the head-to-head comparison.
The Vulkan result is particularly striking because the AMD card otherwise shows strong raw compute figures elsewhere in its specification sheet. The 59.1% delta suggests the NVIDIA implementation extracts substantially more from the same workload type, at least in this specific benchmark. The OpenCL result is closer, with the delta at 9.1%, indicating that general-purpose compute performance is more competitive than the Vulkan outcome implies. Across the two tests, the win tally is 0 for AMD and 2 for NVIDIA. No benchmark in the database shows the AMD part ahead.
The average benchmark score reinforces the separation. AMD's average is 63,830, while NVIDIA's average is 22,435. However, these averages are computed over different benchmark suites, so direct comparison is misleading. The AMD average draws from just two Geekbench tests, both compute-oriented. The NVIDIA average includes the same two Geekbench tests plus DirectX 10, 11, 12, and 9 Passmark tests, a 2D test, a 3D test, and a compute test. The NVIDIA suite is far broader, and its lower average reflects inclusion of older DirectX workloads where scores are naturally smaller. Within the shared tests, NVIDIA leads both.
Architecture Differences
The two GPUs come from different manufacturers, different architectures, and different process nodes. AMD uses the Navi 44 chip built on RDNA 4.0 architecture, fabricated on a 4 nm process at TSMC. NVIDIA uses the GB206 chip built on Blackwell 2.0 architecture, fabricated on a 5 nm process, also at TSMC. The transistor counts diverge substantially: AMD packs 29,700 million transistors into a 199 mm² die, yielding a density of 149.2 million transistors per square millimeter. NVIDIA fits 21,900 million transistors into a 181 mm² die, for a density of 121.0 million per square millimeter. AMD's smaller process node and larger transistor budget give it a density advantage of roughly 23%.
Clock speeds are heavily asymmetric. AMD lists a base clock of 1380 MHz, a game clock of 2450 MHz, and a boost clock of 3050 MHz. NVIDIA lists a base of 952 MHz and a boost of 1455 MHz, with no game clock specified. The AMD boost clock is more than double the NVIDIA boost clock, and the base clocks differ by 428 MHz. This clock advantage is central to AMD's compute throughput. The FP32 figures reflect it: AMD delivers 24.99 TFLOPS, NVIDIA delivers 9.684 TFLOPS. Both list FP16 at the same 1:1 ratio as FP32, so the same delta applies there.
Memory configurations differ in capacity, type, and bandwidth. AMD has 16 GB of GDDR6 on a 128-bit bus, producing 322.3 GB/s. NVIDIA has 8 GB of GDDR7 on a 128-bit bus, producing 384.0 GB/s. The NVIDIA memory is faster per pin, but AMD has twice the capacity. Effective memory clock for AMD is 2518 MHz (20.1 Gbps effective), while NVIDIA runs at 1500 MHz (24 Gbps effective). The NVIDIA part achieves 19.2% higher bandwidth despite half the capacity.
Core counts are structured differently. AMD has 2048 shading units, 128 texture mapping units, 64 render output units, and 32 ray tracing cores. NVIDIA has 3328 shading units, 104 TMUs, 48 ROPs, 26 ray tracing cores, and 104 tensor cores. AMD has no tensor core field in the database. NVIDIA's pixel rate is 69.84 GPixel/s, versus AMD's 195.2 GPixel/s. Texture rates are 151.3 GTexel/s for NVIDIA and 390.4 GTexel/s for AMD. AMD leads in both pixel and texture throughput by wide margins.
Power and physical specifications are polar opposites. AMD is rated at 140 W TDP, uses a dual-slot cooler, requires a single 8-pin power connector, and suggests a 300 W power supply. NVIDIA is rated at 45 W TDP, is an integrated graphics package (IGP) with no slot width, and requires no power connector. The AMD card is a discrete add-in board; the NVIDIA part is a mobile chip soldered to a laptop board. Both use PCIe 5.0 x16 interfaces. AMD outputs via 1x HDMI 2.1b and 2x DisplayPort 2.1a, while NVIDIA outputs are portable device dependent. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Where Each One Wins
The data indicates that the NVIDIA GeForce RTX 5060 Mobile wins in the two shared benchmarks, but the AMD Radeon RX 9060 XT LP holds advantages in several specification categories that do not appear in those tests. AMD leads in raw compute throughput: FP32 at 24.99 TFLOPS versus 9.684 TFLOPS, a 158% advantage. Pixel rate favors AMD at 195.2 GPixel/s versus 69.84 GPixel/s, a 179% lead. Texture rate favors AMD at 390.4 GTexel/s versus 151.3 GTexel/s, a 158% lead. These are large, structural differences that would matter in workloads not covered by the two shared benchmarks.
Memory capacity is another AMD strength. At 16 GB versus 8 GB, the AMD card offers twice the frame buffer. For high-resolution textures, large scenes, or compute workloads that spill into video memory, that capacity difference is likely decisive. The NVIDIA part counters with higher memory bandwidth at 384.0 GB/s versus 322.3 GB/s, a 19.2% advantage. If a workload is bandwidth-bound and fits within 8 GB, NVIDIA has the edge.
NVIDIA also brings tensor cores, which AMD lacks entirely in this database entry. With 104 tensor cores, the NVIDIA part has dedicated hardware for AI and machine learning workloads. The AMD card has no tensor core count listed, so the database records no equivalent capability. For applications that rely on tensor operations, this is a structural advantage for NVIDIA that no AMD specification can offset.
The power envelope is a clear NVIDIA win. At 45 W versus 140 W, the NVIDIA part consumes roughly one-third the power of the AMD card. This translates directly to system design: the NVIDIA chip can operate in thin-and-light laptops with no discrete cooling or power connector, while the AMD card requires dual-slot cooling, an 8-pin connector, and a 300 W power supply recommendation. For mobile use, NVIDIA's efficiency is the dominant factor.
The Verdict
The choice between these two GPUs depends entirely on the intended use case, and the data supports a clean split. For desktop or workstation systems where power draw is not a constraint and compute throughput is the priority, the AMD Radeon RX 9060 XT LP has the stronger specification sheet. Its FP32 throughput, pixel rate, texture rate, and 16 GB memory capacity all exceed the NVIDIA part by wide margins. The 89th percentile rank among all GPUs, compared to NVIDIA's 67th, reflects AMD's higher standing in the overall database distribution.
For portable systems, the NVIDIA GeForce RTX 5060 Mobile is the only viable option of the two. Its 45 W TDP, IGP form factor, and lack of power connector requirements make it suitable for laptops, while the AMD card's dual-slot cooler and 8-pin connector preclude such deployment. The NVIDIA part also wins both recorded shared benchmarks, including a 59.1% Vulkan lead. Its tensor cores provide AI capability that AMD does not list. The 8 GB memory capacity is a limitation, but for the mobile segment where this chip operates, it is paired with a bandwidth advantage over AMD.
The release dates confirm the product positioning. AMD shipped the RX 9060 XT LP on December 16, 2025, roughly seven months after the RTX 5060 Mobile's May 19, 2025 release. Both remain in active production. Neither has a successor listed in the database. The AMD predecessor is Navi III; the NVIDIA predecessor is GeForce 40 Mobile. These are distinct product lines aimed at different physical formats, and the benchmark data reflects that split.
FAQ
Q: Which GPU has the higher average benchmark score?
A: The AMD Radeon RX 9060 XT LP has an average benchmark score of 63,830, while the NVIDIA GeForce RTX 5060 Mobile has an average of 22,435. However, these averages are computed from different benchmark suites, so they are not directly comparable.
Q: How large is the Vulkan performance gap between the two?
A: In Geekbench Vulkan, the NVIDIA part scores 96,451 against AMD's 39,476, a 59.1% difference in NVIDIA's favor.
Q: What is the memory capacity difference?
A: The AMD card has 16 GB of GDDR6 memory, while the NVIDIA part has 8 GB of GDDR7 memory. Both use a 128-bit bus.
Q: Does the NVIDIA GPU have tensor cores?
A: Yes, the NVIDIA GeForce RTX 5060 Mobile lists 104 tensor cores. The AMD Radeon RX 9060 XT LP has no tensor core count in the database.
Q: What are the power requirement differences?
A: The AMD card has a 140 W TDP, requires a dual-slot cooler and a single 8-pin power connector, and suggests a 300 W power supply. The NVIDIA chip has a 45 W TDP, is an IGP with no power connector, and has no suggested power supply listed.
Q: Do both GPUs support the same APIs?
A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Specification Differences
| Specification | AMD Radeon RX 9060 XT LP | NVIDIA GeForce RTX 5060 Mobile |
|---|---|---|
| Architecture | RDNA 4.0 | Blackwell 2.0 |
| Process Node | 4 nm | 5 nm |
| Transistors | 29,700 million | 21,900 million |
| Die Size | 199 mm² | 181 mm² |
| Transistor Density | 149.2M / mm² | 121.0M / mm² |
| Base Clock | 1380 MHz | 952 MHz |
| Boost Clock | 3050 MHz | 1455 MHz |
| Game Clock | 2450 MHz | Not specified |
| Memory Size | 16 GB | 8 GB |
| Memory Type | GDDR6 | GDDR7 |
| Memory Clock | 2518 MHz (20.1 Gbps effective) | 1500 MHz (24 Gbps effective) |
| Memory Bandwidth | 322.3 GB/s | 384.0 GB/s |
| Shading Units | 2048 | 3328 |
| Texture Mapping Units | 128 | 104 |
| Render Output Units | 64 | 48 |
| Ray Tracing Cores | 32 | 26 |
| Tensor Cores | Not specified | 104 |
| Pixel Rate | 195.2 GPixel/s | 69.84 GPixel/s |
| Texture Rate | 390.4 GTexel/s | 151.3 GTexel/s |
| FP32 Performance | 24.99 TFLOPS | 9.684 TFLOPS |
| FP16 Performance | 24.99 TFLOPS (1:1) | 9.684 TFLOPS (1:1) |
| TDP | 140 W | 45 W |
| Slot Width | Dual-slot | IGP |
| Power Connectors | 1x 8-pin | None |
| Suggested PSU | 300 W | Not specified |
| Display Outputs | 1x HDMI 2.1b, 2x DisplayPort 2.1a | Portable Device Dependent |
| Release Date | 2025-12-16 | 2025-05-19 |
| Predecessor | Navi III | GeForce 40 Mobile |
| Percentile vs All GPUs | 89 | 67 |