AMD Radeon 8050S vs Lisuan Tech LX ULTRA Comparison

Head-to-Head Benchmarks

The recorded data shows no direct head-to-head benchmark results between the AMD Radeon 8050S and the Lisuan Tech LX ULTRA. The database contains no matching test entries where both GPUs were run under identical conditions. However, the available individual benchmark scores and performance percentiles allow for a comparative analysis based on the measured data.

The AMD Radeon 8050S delivers a Geekbench OpenCL score of 65818 and a Geekbench Vulkan score of 58398. Its average benchmark score across all recorded tests is 62108. This places the Radeon 8050S in the 89th percentile among all GPUs in the database. The Lisuan Tech LX ULTRA has no recorded benchmark scores, with an average benchmark score of 0 and a percentile rank of 50. The absence of measured results for the LX ULTRA means the database cannot confirm any performance advantage for that part.

The Radeon 8050S shows a 0.3% lead over the AMD Radeon Pro W6600M, which scores 61896 on average. It trails the AMD Radeon Pro Vega 56 by 2.5%, with that rival averaging 63693. The AMD Radeon RX 7600M sits 2.6% ahead at 63775, and the AMD Radeon RX 9060 XT LP leads by 2.7% with a score of 63830. These nearest rival comparisons place the Radeon 8050S within a tight performance cluster, all within roughly 3% of each other.

Without any recorded benchmarks for the LX ULTRA, the database cannot establish which GPU wins in compute workloads. The Radeon 8050S has verifiable scores in two major API tests. The LX ULTRA has no such measurements. The data indicates that the Radeon 8050S is a functional, tested product with active production status, while the LX ULTRA's performance remains unquantified in the database.

Where Each One Wins

The AMD Radeon 8050S wins in any workload where benchmark scores matter, simply because it has recorded results and the LX ULTRA does not. The Radeon 8050S achieves 65818 in Geekbench OpenCL, which reflects general compute performance across a range of tasks. Its Vulkan score of 58398 indicates strong graphics API performance. The average benchmark score of 62108 confirms consistent output across both tests.

The LX ULTRA wins in specifications related to memory capacity and raw compute throughput. It carries 24 GB of GDDR6 memory on a 192-bit bus, delivering 432.0 GB/s of bandwidth. Its shading units number 6144, with 192 texture mapping units and 96 raster operations units. The LX ULTRA computes 24.58 TFLOPS in FP32 and 49.15 TFLOPS in FP16. The Radeon 8050S uses system shared memory, making its bandwidth system dependent, and its FP32 output is 11.47 TFLOPS with FP16 at 11.47 TFLOPS as well. The LX ULTRA also has a higher texture rate at 384.0 GTexel/s versus 358.4 GTexel/s, and a higher pixel rate at 192.0 GPixel/s versus 179.2 GPixel/s.

The LX ULTRA supports the same DirectX 12 Ultimate (12_2) and OpenGL 4.6 APIs as the Radeon 8050S, but its Vulkan support is version 1.3, while the Radeon 8050S supports Vulkan 1.4. The LX ULTRA uses a dual-slot cooler with a 16-pin power connector and requires a 550 W suggested power supply. The Radeon 8050S is an integrated graphics processor with no power connectors and a 55 W TDP.

The Radeon 8050S wins in power efficiency and integration. Its 55 W TDP allows it to operate without external power connectors, suitable for portable devices. The LX ULTRA draws 225 W, which is four times higher, and needs a dedicated power connection. The Radeon 8050S also uses a PCIe 5.0 x16 interface, while the LX ULTRA uses PCIe 4.0 x16.

The Verdict

The data indicates that the AMD Radeon 8050S is the only one of these two GPUs with measurable performance. Its 89th percentile ranking among all GPUs and average benchmark score of 62108 provide concrete evidence of its capabilities. The LX ULTRA has no benchmark scores, placing it at the 50th percentile by default, which reflects the absence of data rather than actual performance.

For users who need a GPU with verified performance in OpenCL and Vulkan workloads, the Radeon 8050S is the documented choice. Its scores of 65818 and 58398 respectively demonstrate solid compute and graphics throughput. The LX ULTRA cannot be recommended on the basis of performance data, as none exists in the database.

For users who prioritize memory capacity and raw throughput specifications, the LX ULTRA offers 24 GB of GDDR6 memory, 6144 shading units, and 24.58 TFLOPS of FP32 compute. These specifications exceed the Radeon 8050S in absolute terms, but without benchmark confirmation, they remain theoretical figures. The Radeon 8050S uses system shared memory, which means its effective bandwidth and capacity depend on the host system.

The Radeon 8050S suits portable devices and low-power builds, given its 55 W TDP and integrated design. The LX ULTRA targets desktop systems with its dual-slot form factor, 4x DisplayPort 1.4a outputs, and 225 W power requirement. The choice depends on whether the user values verified performance and low power or high memory capacity and compute specifications.

FAQ

Q: Which GPU has a higher average benchmark score?

A: The AMD Radeon 8050S has an average benchmark score of 62108. The Lisuan Tech LX ULTRA has an average benchmark score of 0, meaning no recorded benchmarks exist.

Q: What is the memory capacity of each GPU?

A: The AMD Radeon 8050S uses system shared memory, with size and type marked as system dependent. The Lisuan Tech LX ULTRA has 24 GB of GDDR6 memory on a 192-bit bus.

Q: How do the FP32 compute performances compare?

A: The AMD Radeon 8050S delivers 11.47 TFLOPS of FP32 performance. The Lisuan Tech LX ULTRA delivers 24.58 TFLOPS, which is more than double the Radeon 8050S.

Q: What are the power requirements for each GPU?

A: The AMD Radeon 8050S has a 55 W TDP and requires no power connectors. The Lisuan Tech LX ULTRA has a 225 W TDP, uses a single 16-pin power connector, and requires a 550 W suggested power supply.

Q: Which GPU supports the newer PCIe interface?

A: The AMD Radeon 8050S uses PCIe 5.0 x16. The Lisuan Tech LX ULTRA uses PCIe 4.0 x16.

Q: Are there any recorded benchmark results for the Lisuan Tech LX ULTRA?

A: No. The database contains no benchmark entries for the LX ULTRA, and its average benchmark score is recorded as 0.

Architecture Differences

The AMD Radeon 8050S uses the Strix Halo chip based on the RDNA 3.5 architecture. It belongs to the Navi Mobile (RX 8000M) generation and is manufactured on a 4 nm process at TSMC. The die size measures 308 mm². The Lisuan Tech LX ULTRA uses the 7G105 chip based on the TrueGPU architecture, part of the 7G100 generation. It is manufactured on a 6 nm process at TSMC, with die size unknown.

The Radeon 8050S has 2048 shading units, 128 texture mapping units, 64 raster operations units, and 32 ray tracing cores. The LX ULTRA has 6144 shading units, 192 texture mapping units, and 96 raster operations units, but no ray tracing core count is recorded. The Radeon 8050S supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The LX ULTRA supports DirectX 12 Ultimate (12_2), OpenGL 4.6, but only Vulkan 1.3.

The Radeon 8050S operates with a base clock of 1295 MHz and a boost clock of 2800 MHz. The LX ULTRA has no recorded base or boost clocks. Its memory clock is 2250 MHz with 18 Gbps effective speed. The Radeon 8050S uses system shared memory, so clock speeds for memory are not fixed. The LX ULTRA's FP16 performance runs at a 2:1 ratio relative to FP32, achieving 49.15 TFLOPS, while the Radeon 8050S operates at a 1:1 ratio, giving 11.47 TFLOPS in both FP32 and FP16.

Specification Differences

The AMD Radeon 8050S and Lisuan Tech LX ULTRA differ across nearly every recorded specification. The Radeon 8050S is an integrated GPU (IGP) with a single-slot form factor, while the LX ULTRA is a dual-slot discrete card. The Radeon 8050S has no power connectors, while the LX ULTRA requires a single 16-pin connector. The LX ULTRA has a suggested power supply rating of 550 W; the Radeon 8050S lists no suggested PSU.

The Radeon 8050S offers a PCIe 5.0 x16 bus interface, while the LX ULTRA uses PCIe 4.0 x16. Display outputs on the Radeon 8050S are portable device dependent, while the LX ULTRA provides 4x DisplayPort 1.4a outputs. The LX ULTRA has physical dimensions of 268 mm length, 112 mm height, and 40 mm width. The Radeon 8050S has no recorded dimensions.

The Radeon 8050S has a TDP of 55 W, versus 225 W for the LX ULTRA. The Radeon 8050S has 2048 shading units, 128 TMUs, and 64 ROPs, compared to 6144 shading units, 192 TMUs, and 96 ROPs for the LX ULTRA. The Radeon 8050S has 32 ray tracing cores; the LX ULTRA has no recorded ray tracing core count. Pixel rates are 179.2 GPixel/s for the Radeon 8050S and 192.0 GPixel/s for the LX ULTRA. Texture rates are 358.4 GTexel/s versus 384.0 GTexel/s respectively.

Memory configurations diverge completely. The Radeon 8050S uses system shared memory with system dependent bandwidth. The LX ULTRA has 24 GB of GDDR6 memory on a 192-bit bus with 432.0 GB/s bandwidth. The Radeon 8050S was released on 2025-01-05, while the LX ULTRA has a release date of 2026-03-16. Both are marked as active in production status. The Radeon 8050S lists Polaris Mobile as its predecessor; the LX ULTRA has no predecessor recorded.