AMD Radeon RX 7400 OEM vs Lisuan Tech LX ULTRA Comparison
AMD Radeon RX 7400 OEM
Lisuan Tech LX ULTRA
Analysis: AMD Radeon RX 7400 OEM vs Lisuan Tech LX ULTRA
Head-to-Head Benchmarks
The recorded data shows no direct benchmark comparisons between the AMD Radeon RX 7400 OEM and the Lisuan Tech LX ULTRA. Neither card has entries in the head-to-head benchmark table, and both carry identical percentile scores of 50 against all GPUs in the database. The average benchmark score for both products is recorded as zero, indicating that no standardized performance measurements have been captured for either card.
What the data does provide is a set of theoretical compute and throughput figures that allow for a direct comparison of raw processing capabilities. The Lisuan Tech LX ULTRA delivers 24.58 TFLOPS of FP32 compute, which is roughly three times the 7.885 TFLOPS offered by the AMD Radeon RX 7400 OEM. In FP16 workloads, the gap widens further: the LX ULTRA reaches 49.15 TFLOPS with a 2:1 ratio, while the RX 7400 OEM delivers 7.885 TFLOPS at a 1:1 ratio. That represents a 6.2x advantage for the Lisuan card in half-precision compute.
Pixel throughput tells a similar story. The LX ULTRA processes 192.0 GPixel/s compared to 70.40 GPixel/s on the RX 7400 OEM, a 2.7x difference. Texture fill rates show 384.0 GTexel/s versus 123.2 GTexel/s, which is a 3.1x spread. These figures point to the LX ULTRA being substantially faster in raw fill-rate-bound scenarios.
Memory bandwidth favors the Lisuan card as well. The LX ULTRA delivers 432.0 GB/s across a 192-bit bus with 24 GB of GDDR6 running at 18 Gbps effective, while the RX 7400 OEM provides 172.8 GB/s on a 128-bit bus with 8 GB of GDDR6 at 10.8 Gbps effective. That is a 2.5x bandwidth advantage. The RX 7400 OEM uses a 6-pin power connector and carries a 55 W TDP with a 250 W suggested power supply, whereas the LX ULTRA uses a 16-pin connector with a 225 W TDP and a 550 W suggested power supply. The power draw difference is substantial and directly correlates with the performance gap.
Architecture Differences
The two cards come from entirely different design philosophies. The AMD Radeon RX 7400 OEM belongs to the Radeon RX 7000 series, built on the Navi 33 chip using RDNA 3.0 architecture with the codename Hotpink Bonefish. It sits in the Navi III generation, which follows Navi II and precedes Navi IV. The Lisuan Tech LX ULTRA uses a 7G105 chip under an architecture labeled TrueGPU, belonging to the 7G100 generation. Neither product has a recorded predecessor or successor in the database for the Lisuan card, while the AMD part has clear lineage.
Both GPUs are fabricated on a 6 nm process at TSMC. The AMD chip contains 13,300 million transistors on a 204 mm² die, giving a transistor density of 65.2M per mm². The Lisuan chip has unknown transistor count, die size, and density figures. This makes direct efficiency comparisons impossible, but the power figures provide some context: the RX 7400 OEM draws 55 W, while the LX ULTRA draws 225 W, exactly four times higher. The AMD card achieves 7.885 TFLOPS at 55 W, while the Lisuan card reaches 24.58 TFLOPS at 225 W. Per watt, the RX 7400 OEM delivers approximately 0.143 TFLOPS per watt, and the LX ULTRA delivers approximately 0.109 TFLOPS per watt, suggesting the AMD part is more efficient in FP32 compute per unit of power.
Shader resources differ substantially. The RX 7400 OEM has 1792 shading units, 112 texture mapping units, 64 ROPs, and 28 ray tracing cores. The LX ULTRA has 6144 shading units, 192 TMUs, and 96 ROPs, but no ray tracing core count is recorded. The Lisuan card has 3.4x more shading units, 1.7x more TMUs, and 1.5x more ROPs. The AMD card includes dedicated ray tracing hardware, while the database does not list any for the Lisuan product. Both cards support DirectX 12 Ultimate (12_2) and OpenGL 4.6. The AMD card supports Vulkan 1.4, while the LX ULTRA supports Vulkan 1.3, a minor version difference.
Physical specifications diverge sharply. The RX 7400 OEM is a single-slot card measuring 167 mm in length, with no height or width recorded. The LX ULTRA is a dual-slot card with dimensions of 268 mm length, 112 mm height, and 40 mm width. The Lisuan card is 101 mm longer. The AMD card uses a PCIe 4.0 x8 interface, while the Lisuan card uses PCIe 4.0 x16, providing double the bus lanes. Display outputs also differ: the RX 7400 OEM provides 1x HDMI 2.1a and 3x DisplayPort 2.1, while the LX ULTRA provides 4x DisplayPort 1.4a with no HDMI output. The AMD card supports a newer DisplayPort standard, while the Lisuan card offers an additional physical output.
Where Each One Wins
The RX 7400 OEM wins in efficiency and compactness. Its 55 W TDP allows for a single-slot design at 167 mm length, which fits in small form factor cases where the 268 mm dual-slot LX ULTRA will not. The AMD card also carries ray tracing cores, which the Lisuan card lacks according to the database. For applications that use DirectX 12 Ultimate ray tracing workloads, the RX 7400 OEM has dedicated hardware support. The newer DisplayPort 2.1 outputs on the AMD card support higher bandwidth connections to compatible monitors compared to the DisplayPort 1.4a on the Lisuan card. The RX 7400 OEM also supports Vulkan 1.4 versus Vulkan 1.3 on the LX ULTRA, which may matter for specific Vulkan-based applications.
The LX ULTRA wins in raw compute, memory capacity, and memory bandwidth. Its 24.58 TFLOPS FP32 performance is more than triple the AMD card, and its 24 GB of GDDR6 memory is three times the 8 GB on the RX 7400 OEM. The 432.0 GB/s bandwidth is 2.5x higher. For workloads that are memory-bound, such as large dataset processing or high-resolution texture workloads, the LX ULTRA holds a clear advantage. The 192-bit memory bus provides wider access to memory compared to the 128-bit bus on the AMD card. The LX ULTRA also uses a PCIe 4.0 x16 interface, which doubles the bandwidth available for data transfer between the card and the rest of the system compared to the PCIe 4.0 x8 on the AMD card. The LX ULTRA has 4x DisplayPort outputs, allowing four displays to be connected simultaneously, while the AMD card has 3x DisplayPort plus 1x HDMI.
The FP16 capability of the LX ULTRA at 49.15 TFLOPS with a 2:1 ratio indicates it can handle half-precision workloads at a much higher rate than the RX 7400 OEM, which offers only 7.885 TFLOPS at a 1:1 ratio. This makes the Lisuan card more suitable for AI inference or scientific computing tasks that leverage FP16 arithmetic. The RX 7400 OEM has no tensor cores recorded, and neither does the LX ULTRA, so neither card has dedicated tensor hardware.
FAQ
Q: Which card has higher raw FP32 compute performance?
A: The Lisuan Tech LX ULTRA delivers 24.58 TFLOPS of FP32 compute, which is 3.1x higher than the 7.885 TFLOPS of the AMD Radeon RX 7400 OEM.
Q: How much memory does each card have and what is the bandwidth?
A: The AMD Radeon RX 7400 OEM has 8 GB of GDDR6 on a 128-bit bus with 172.8 GB/s bandwidth. The Lisuan Tech LX ULTRA has 24 GB of GDDR6 on a 192-bit bus with 432.0 GB/s bandwidth.
Q: Which card requires more power?
A: The Lisuan Tech LX ULTRA has a 225 W TDP and a suggested 550 W power supply. The AMD Radeon RX 7400 OEM has a 55 W TDP and a suggested 250 W power supply.
Q: Do both cards support DirectX 12 Ultimate?
A: Yes, both the AMD Radeon RX 7400 OEM and the Lisuan Tech LX ULTRA support DirectX 12 Ultimate (12_2) and OpenGL 4.6. The AMD card supports Vulkan 1.4, while the Lisuan card supports Vulkan 1.3.
Q: Which card has ray tracing cores?
A: The AMD Radeon RX 7400 OEM has 28 ray tracing cores. The Lisuan Tech LX ULTRA has no ray tracing core count recorded in the database.
Q: What are the physical size differences?
A: The AMD Radeon RX 7400 OEM is a single-slot card with a length of 167 mm. The Lisuan Tech LX ULTRA is a dual-slot card with a length of 268 mm, height of 112 mm, and width of 40 mm.
Specification Differences
The two cards differ across nearly every recorded specification. The AMD Radeon RX 7400 OEM uses the Navi 33 chip with RDNA 3.0 architecture, while the Lisuan Tech LX ULTRA uses the 7G105 chip with TrueGPU architecture. The AMD card has 13,300 million transistors on a 204 mm² die, while the Lisuan card has unknown transistor count and die size. Both are fabricated on a 6 nm TSMC process.
Clock speeds are recorded differently. The AMD card has a base clock of 330 MHz and a boost clock of 1100 MHz, with memory running at 1350 MHz (10.8 Gbps effective). The Lisuan card has no base or boost clock recorded, but its memory runs at 2250 MHz (18 Gbps effective). The AMD card has no game clock listed, and neither does the Lisuan card.
Shading resources differ: 1792 shading units, 112 TMUs, 64 ROPs, and 28 ray tracing cores on the AMD card, versus 6144 shading units, 192 TMUs, 96 ROPs, and no recorded ray tracing cores on the Lisuan card. Pixel rate is 70.40 GPixel/s on the AMD card versus 192.0 GPixel/s on the Lisuan card. Texture rate is 123.2 GTexel/s versus 384.0 GTexel/s. FP32 performance is 7.885 TFLOPS versus 24.58 TFLOPS. FP16 performance is 7.885 TFLOPS (1:1) versus 49.15 TFLOPS (2:1).
Power and physical requirements diverge: 55 W TDP with a 6-pin connector and 250 W suggested PSU on the AMD card, versus 225 W TDP with a 16-pin connector and 550 W suggested PSU on the Lisuan card. The AMD card is single-slot at 167 mm length, while the Lisuan card is dual-slot at 268 mm length, 112 mm height, and 40 mm width. Bus interface is PCIe 4.0 x8 on the AMD card versus PCIe 4.0 x16 on the Lisuan card. Display outputs are 1x HDMI 2.1a and 3x DisplayPort 2.1 on the AMD card, versus 4x DisplayPort 1.4a on the Lisuan card. The Lisuan card has an active production status, while the AMD card has no production status recorded. Release dates differ: the AMD card released on 2025-08-07, and the Lisuan card on 2026-03-16.
The Verdict
The data separates these two cards into distinct use cases. The AMD Radeon RX 7400 OEM is a low-power, compact, single-slot solution with ray tracing support and modern display outputs. Its 55 W TDP means it can be powered by a 250 W power supply, and its 167 mm length fits in space-constrained builds. The 28 ray tracing cores provide hardware acceleration for DirectX 12 Ultimate ray tracing workloads. The 8 GB of memory and 172.8 GB/s bandwidth are sufficient for typical 1080p gaming or entry-level content creation, but the 7.885 TFLOPS FP32 compute places it in a modest performance tier.
The Lisuan Tech LX ULTRA is a high-power, large-format card built for maximum throughput. Its 24.58 TFLOPS FP32 and 49.15 TFLOPS FP16 compute, combined with 24 GB of memory and 432.0 GB/s bandwidth, position it for compute-heavy applications such as large-scale rendering, data processing, or AI workloads that benefit from FP16 arithmetic. The 225 W TDP and 550 W suggested power supply require a serious power delivery setup, and the 268 mm length demands a roomy chassis. The dual-slot cooler and 16-pin power connector reflect its higher power class. The lack of recorded ray tracing cores means it may not accelerate ray-traced workloads the way the AMD card does.
For users prioritizing efficiency, small size, and ray tracing capability, the AMD Radeon RX 7400 OEM is the clear choice from the recorded data. For users prioritizing raw compute, memory capacity, and bandwidth, the Lisuan Tech LX ULTRA dominates. The 3.1x FP32 advantage, 3x memory capacity, and 2.5x bandwidth of the LX ULTRA make it the stronger performer in raw numbers, but the RX 7400 OEM delivers its performance at roughly one-quarter the power draw. The choice depends entirely on which constraints matter more: power and space, or throughput and memory. The database records no direct benchmark wins for either card, so real-world performance remains unmeasured, but the specification sheet points to two very different design targets.