AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5070 Mobile Comparison

AMD
RADEON

AMD Radeon RX 9050 OEM

CORE STATE Navi 44
VRAM 4 GB
CLOCK SPEED 2600 MHz
TDP 92 W
BUS WIDTH 64 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5070 Mobile

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 1425 MHz
TDP 50 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
N/A
122,238
geekbench_vulkan
N/A
116,960
passmark_directx_10
N/A
129
passmark_directx_11
N/A
192
passmark_directx_12
N/A
93
passmark_directx_9
N/A
214
passmark_g2d
N/A
896
passmark_g3d
N/A
20,355
passmark_gpu_compute
N/A
8,279

Analysis: AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5070 Mobile

The AMD Radeon RX 9050 OEM and NVIDIA GeForce RTX 5070 Mobile occupy very different positions in the database, yet both are active products aimed at distinct segments. The RX 9050 OEM is a desktop add-in board with a 92 W power target, while the RTX 5070 Mobile is an integrated graphics processor for laptops with a 50 W target. Benchmark data exists only for the NVIDIA part, which records an average score of 29,928 across all tests, placing it at the 75th percentile of all GPUs tracked. The AMD part has no recorded benchmarks, no average score, and sits at the 50th percentile as a placeholder. This asymmetry shapes the entire analysis: the RTX 5070 Mobile is measured against real-world results, while the RX 9050 OEM is defined purely by its specification sheet.

Head-to-Head Benchmarks

Direct head-to-head benchmark comparisons are impossible because the database contains zero recorded test scores for the AMD Radeon RX 9050 OEM. The head-to-head benchmark array is empty, and the wins counter shows 0 for both sides. What the database does provide is a full set of nine benchmark results for the NVIDIA GeForce RTX 5070 Mobile, which can be examined on their own terms.

The RTX 5070 Mobile’s strongest result comes from Geekbench OpenCL with a score of 122,238. Its Vulkan score is 116,960, which is 4.5% lower than the OpenCL score. PassMark G3D records 20,355, while PassMark GPU Compute shows 8,279, a figure that is roughly 40.7% of the G3D score. The older DirectX tests reveal a different pattern: PassMark DirectX 9 scores 214, DirectX 11 scores 192, DirectX 10 scores 129, and DirectX 12 scores 93. The DirectX 12 score is the lowest of the entire set, representing only 43.5% of the DirectX 9 result. PassMark G2D, a 2D graphics test, returns 896.

The nearest rival data for the RTX 5070 Mobile helps contextualize the average score. The NVIDIA GeForce RTX 3070 Ti has an average score of 29,945, which is 0.1% higher than the RTX 5070 Mobile’s 29,928. The AMD Radeon RX 6800 averages 30,095, a 0.6% advantage. The NVIDIA GeForce RTX 2080 Ti averages 29,783, which is 0.5% lower. The AMD Radeon RX 6700 averages 30,433, leading by 1.7%. These deltas are small, all within 1.7% of the RTX 5070 Mobile, indicating that the mobile GPU performs on par with a set of desktop-class cards from the previous generation. The RTX 5070 Mobile effectively matches the RTX 3070 Ti within 0.1%, which is a statistical tie in the database’s measurement framework.

Because the RX 9050 OEM has no scores, there is no way to state which GPU wins any given test. The data only permits a one-sided analysis of the NVIDIA part. The absence of AMD benchmark data is itself a finding: the database has not yet measured the RX 9050 OEM, so any performance claims about it would be unsupported.

Where Each One Wins

The RTX 5070 Mobile demonstrates clear strengths in compute-oriented workloads based on its recorded results. The Geekbench OpenCL score of 122,238 exceeds the Vulkan score of 116,960, suggesting that OpenCL compute tasks extract slightly more performance than Vulkan compute tasks. In PassMark’s suite, the G3D score of 20,355 dwarfs the GPU Compute score of 8,279, indicating that the card is optimized for 3D graphics rendering rather than raw compute throughput. The DirectX 9 score of 214 is the highest among the DirectX tests, while DirectX 12 at 93 is the lowest. This pattern suggests that the RTX 5070 Mobile excels in legacy DirectX 9 workloads but delivers less relative performance in DirectX 12, possibly due to driver overhead or architectural scheduling.

The RX 9050 OEM cannot be assigned wins in any category because no benchmark data exists. However, its specifications suggest where it might excel if measurements were taken. The 64-bit memory bus and 4 GB GDDR6 configuration limit memory bandwidth to 144.0 GB/s, which is far below the RTX 5070 Mobile’s 384.0 GB/s. The RX 9050 OEM’s 1024 shading units and 64 texture mapping units would likely favor lighter workloads, but the data does not confirm any actual win. The only honest conclusion is that the RTX 5070 Mobile wins in every category where a comparison is possible, which is none of them directly, but its existing scores show a capable compute and graphics profile.

The RTX 5070 Mobile’s 8 GB GDDR7 memory with a 128-bit bus and 384.0 GB/s bandwidth gives it a clear memory advantage over the RX 9050 OEM’s 4 GB GDDR6 and 144.0 GB/s. That 2.67x bandwidth difference would matter in texture-heavy scenes or large compute buffers, but the database has not measured the AMD part to confirm any real-world impact.

Architecture Differences

The two GPUs come from different architectural families. The AMD Radeon RX 9050 OEM uses the Navi 44 chip built on RDNA 4.0 architecture, fabricated on TSMC’s 4 nm process. It contains 29,700 million transistors on a 199 mm² die, yielding a transistor density of 149.2 million per mm². The NVIDIA GeForce RTX 5070 Mobile uses the GB206 chip on Blackwell 2.0 architecture, also fabricated by TSMC but on a 5 nm process. It packs 21,900 million transistors onto a 181 mm² die, giving a density of 121.0 million per mm². The AMD chip has more transistors and a higher density, but the NVIDIA chip is smaller in die area.

Core counts differ substantially. The RX 9050 OEM has 1024 shading units, 64 TMUs, and 64 ROPs. The RTX 5070 Mobile has 4608 shading units, 144 TMUs, and 48 ROPs. NVIDIA’s part has 4.5x more shading units and 2.25x more TMUs, but AMD has 1.33x more ROPs. The RTX 5070 Mobile also carries 36 ray tracing cores and 144 tensor cores, while the RX 9050 OEM has 16 ray tracing cores and no tensor cores. This means NVIDIA’s architecture supports dedicated tensor operations for AI workloads, which the AMD part lacks entirely.

Clock speeds show an interesting inversion. The RX 9050 OEM has a base clock of 1330 MHz and a boost clock of 2600 MHz, with a game clock of 1920 MHz. The RTX 5070 Mobile has a base clock of 907 MHz and a boost clock of 1425 MHz. AMD’s boost clock is 82.5% higher than NVIDIA’s, but NVIDIA’s much larger shader count compensates in raw throughput. The memory clocks also differ: AMD runs at 2250 MHz with 18 Gbps effective, while NVIDIA runs at 1500 MHz with 24 Gbps effective. NVIDIA’s effective memory speed is 33.3% higher.

Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Both use a PCIe 5.0 x16 bus interface. The RX 9050 OEM is a dual-slot card requiring one 8-pin power connector and a 250 W suggested PSU. The RTX 5070 Mobile is an integrated graphics processor with no power connectors and no suggested PSU listed. The RX 9050 OEM offers 1x HDMI 2.1b and 2x DisplayPort 2.1a outputs, while the RTX 5070 Mobile’s display outputs are labeled as portable device dependent.

The RX 9050 OEM’s pixel rate is 166.4 GPixel/s, and its texture rate is 166.4 GTexel/s. The RTX 5070 Mobile’s pixel rate is 68.40 GPixel/s, and its texture rate is 205.2 GTexel/s. AMD leads in pixel fill by 2.43x, but NVIDIA leads in texture fill by 1.23x. FP32 performance goes to NVIDIA at 13.13 TFLOPS versus AMD’s 10.65 TFLOPS, a 23.3% advantage. Both have FP16 at a 1:1 ratio with FP32, meaning no separate half-precision boost on either side.

FAQ

Q: Does the AMD Radeon RX 9050 OEM have any benchmark scores in the database?

A: No. The database lists zero benchmarks for the RX 9050 OEM, with an average benchmark score of 0 and no entries in its benchmark array.

Q: How does the RTX 5070 Mobile compare to its nearest rivals in average score?

A: The RTX 5070 Mobile averages 29,928. The RTX 3070 Ti averages 29,945, which is 0.1% higher. The RTX 2080 Ti averages 29,783, which is 0.5% lower. The RX 6800 averages 30,095, which is 0.6% higher. The RX 6700 averages 30,433, which is 1.7% higher.

Q: Which GPU has more memory bandwidth?

A: The RTX 5070 Mobile has 384.0 GB/s bandwidth from 8 GB of GDDR7 on a 128-bit bus. The RX 9050 OEM has 144.0 GB/s from 4 GB of GDDR6 on a 64-bit bus. NVIDIA’s bandwidth is 2.67x higher.

Q: What is the power draw difference between the two?

A: The RX 9050 OEM has a TDP of 92 W and requires a 250 W suggested PSU. The RTX 5070 Mobile has a TDP of 50 W and lists no suggested PSU, as it is an integrated part.

Q: Do both GPUs support the same graphics APIs?

A: Yes. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: Which GPU has more shading units?

A: The RTX 5070 Mobile has 4608 shading units. The RX 9050 OEM has 1024 shading units. NVIDIA has 4.5x more.

Specification Differences

The database records the following fields where the two GPUs differ:

  • Process node: 4 nm (AMD) versus 5 nm (NVIDIA)
  • Transistors: 29,700 million versus 21,900 million
  • Die size: 199 mm² versus 181 mm²
  • Transistor density: 149.2M / mm² versus 121.0M / mm²
  • Base clock: 1330 MHz versus 907 MHz
  • Boost clock: 2600 MHz versus 1425 MHz
  • Game clock: 1920 MHz (AMD only, NVIDIA has none)
  • Memory clock: 2250 MHz 18 Gbps effective versus 1500 MHz 24 Gbps effective
  • Memory size: 4 GB versus 8 GB
  • Memory type: GDDR6 versus GDDR7
  • Bus width: 64 bit versus 128 bit
  • Bandwidth: 144.0 GB/s versus 384.0 GB/s
  • Shading units: 1024 versus 4608
  • TMUs: 64 versus 144
  • ROPs: 64 versus 48
  • RT cores: 16 versus 36
  • Tensor cores: none versus 144
  • Pixel rate: 166.4 GPixel/s versus 68.40 GPixel/s
  • Texture rate: 166.4 GTexel/s versus 205.2 GTexel/s
  • FP32: 10.65 TFLOPS versus 13.13 TFLOPS
  • FP16: 10.65 TFLOPS (1:1) versus 13.13 TFLOPS (1:1)
  • TDP: 92 W versus 50 W
  • Slot width: Dual-slot versus IGP
  • Power connectors: 1x 8-pin versus None
  • Suggested PSU: 250 W versus none listed
  • Display outputs: 1x HDMI 2.1b, 2x DisplayPort 2.1a versus Portable Device Dependent
  • Release date: 2026-07-27 versus 2025-04-14
  • Predecessor: Navi III versus GeForce 40 Mobile
  • Percentile: 50 versus 75
  • Average benchmark score: 0 versus 29,928

Fields that match include manufacturer foundry, bus interface (PCIe 5.0 x16), and all three API supports.

The Verdict

The data in the database points to the NVIDIA GeForce RTX 5070 Mobile as the measured performer. It has a 75th percentile ranking, an average score of 29,928, and a full set of nine benchmark results. Its nearest rivals, all desktop cards from the prior generation, fall within a 1.7% band of its average score, which indicates that this mobile GPU delivers desktop-class performance in a 50 W package. The RTX 5070 Mobile also brings 8 GB of GDDR7 memory, 4608 shading units, 144 tensor cores, and 13.13 TFLOPS of FP32 compute.

The AMD Radeon RX 9050 OEM has no measurements to support any performance claim. Its specifications show a 92 W desktop card with 4 GB of GDDR6 memory, 1024 shading units, and 10.65 TFLOPS of FP32. The 64-bit memory bus and 144.0 GB/s bandwidth are the most limiting factors, especially compared to NVIDIA’s 384.0 GB/s. The RX 9050 OEM does lead in pixel rate at 166.4 GPixel/s versus 68.40 GPixel/s, and it has a higher boost clock at 2600 MHz versus 1425 MHz, but without benchmark scores, these advantages remain theoretical.

For users who rely on recorded performance, the RTX 5070 Mobile is the only choice supported by data. For those considering the RX 9050 OEM, the database provides no evidence of its performance level. The verdict from the recorded data is straightforward: the RTX 5070 Mobile is a validated, mid-to-high percentile GPU, while the RX 9050 OEM remains an unmeasured quantity. The RTX 5070 Mobile’s release date of 2025-04-14 also gives it a longer track record in the database, whereas the RX 9050 OEM’s release date of 2026-07-27 is newer and lacks any accumulated results.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9050 OEM
RTX 5070 Mobile
Core Specs
Shading Units
1,024
4,608 +350.0%
Shaders
1,024
4,608 +350.0%
TMUs
64
144 +125.0%
ROPs
64
48 -25.0%
Compute Units
16
—
SM Count
—
36
Clocks
Base Clock
1330 MHz
907 MHz
Boost Clock
2600 MHz
1425 MHz
Game Clock
1920 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
1500 MHz 24 Gbps effective
Memory
Memory Size
4 GB
8 GB
VRAM (MB)
4,096
8,192 +100.0%
Memory Type
GDDR6
GDDR7
Memory Bus
64 bit
128 bit
Bandwidth
144.0 GB/s
384.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
2 MB
32 MB
L3 Cache
16 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
166.4 GPixel/s
68.40 GPixel/s
Texture Rate
166.4 GTexel/s
205.2 GTexel/s
FP32 (TFLOPS)
10.65 TFLOPS
13.13 TFLOPS
FP64 (TFLOPS)
332.8 GFLOPS (1:32)
205.2 GFLOPS (1:64)
FP16 (TFLOPS)
10.65 TFLOPS (1:1)
13.13 TFLOPS (1:1)
AI/RT
RT Cores
16
36 +125.0%
Tensor Cores
—
144
Matrix Cores
32
—
Power
TDP
92 W
50 W
TDP (W)
92
50 -45.7%
Suggested PSU
250 W
—
Power Connectors
1x 8-pin
None
Architecture
Architecture
RDNA 4.0
Blackwell 2.0
GPU Name
Navi 44
GB206
Generation
Navi IV (RX 9000)
GeForce 50 Mobile
Process Size
4 nm
5 nm
Transistors
29,700 million
21,900 million
Die Size
199 mm²
181 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
121.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
Dual-slot
IGP
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
Portable Device Dependent
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x16
Other
Production
Active
Active
Predecessor
Navi III
GeForce 40 Mobile
View Radeon RX 9050 OEM Details View GeForce RTX 5070 Mobile Details