AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5090 SE Comparison
AMD Radeon RX 9050 OEM
GeForce RTX 5090 SE
Analysis: AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5090 SE
Head-to-Head Benchmarks
The database records no direct benchmark results for the AMD Radeon RX 9050 OEM against the NVIDIA GeForce RTX 5090 SE. Both entries carry an average benchmark score of 0 and a percentile versus all GPUs of 50, meaning neither part has accumulated any measured performance data in the database. The head-to-head benchmark array is empty, and the win counts for both sides are zero.
This absence of data is itself informative. The RX 9050 OEM sits in the Radeon RX 9000 series with a Navi 44 chip, while the RTX 5090 SE belongs to the GeForce 50-series on GB202. The raw architectural figures point to a massive gulf in compute resources. The AMD part delivers 10.65 TFLOPS of FP32 performance, while the NVIDIA card delivers 66.94 TFLOPS, a 6.3x difference. Texture rate tells a similar story: 166.4 GTexel/s versus 1,045.9 GTexel/s, roughly a 6.3x gap. Pixel rate stands at 166.4 GPixel/s for AMD and 380.3 GPixel/s for NVIDIA, a 2.3x difference.
Memory bandwidth separates the two even further. The RX 9050 OEM uses 4 GB of GDDR6 on a 64-bit bus, producing 144.0 GB/s. The RTX 5090 SE uses 24 GB of GDDR7 on a 384-bit bus, producing 1.34 TB/s. That is a 9.3x bandwidth advantage for the NVIDIA card. The data suggests these products target entirely different performance strata, and no benchmark scores exist to soften that conclusion.
Where Each One Wins
Without recorded benchmarks, the wins must be inferred from specifications. The RX 9050 OEM wins on efficiency-oriented metrics. Its TDP is 92 W, compared to 500 W for the RTX 5090 SE. The suggested PSU rating for AMD is 250 W, while NVIDIA asks for 900 W. The AMD card uses a single 8-pin power connector, whereas the NVIDIA card requires a 16-pin connector. The AMD card also measures smaller in physical footprint, though the database lists no length or height for it, only for the NVIDIA card at 267 mm length, 111 mm height, and 40 mm width.
The RTX 5090 SE wins on every raw compute metric in the database. It has 14,080 shading units versus 1,024, 440 TMUs versus 64, 160 ROPs versus 64, 110 RT cores versus 16, and 440 tensor cores where the AMD card lists none. Its clock profile differs as well: base 1740 MHz versus 1330 MHz, boost 2377 MHz versus 2600 MHz. The AMD card actually boosts higher, but the NVIDIA card starts from a higher base and carries far more execution units.
The memory subsystem favors NVIDIA decisively. The RTX 5090 SE has 24 GB of GDDR7 at 28 Gbps effective, while the RX 9050 OEM has 4 GB of GDDR6 at 18 Gbps effective. The bus width difference, 384-bit versus 64-bit, is the primary driver of the bandwidth gap. The transistor counts reflect the scale difference: 92,200 million for GB202 versus 29,700 million for Navi 44, with die sizes of 750 mm² and 199 mm² respectively.
The AMD card uses a smaller process node at 4 nm versus 5 nm for NVIDIA, and it achieves a higher transistor density at 149.2M per mm² versus 122.9M per mm². Both cards use TSMC as the foundry. The AMD part is built on RDNA 4.0 architecture, while the NVIDIA part uses Blackwell 2.0. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Both are dual-slot designs and use PCIe 5.0 x16. The AMD card offers 1x HDMI 2.1b and 2x DisplayPort 2.1a outputs; the NVIDIA card offers 1x HDMI 2.1b and 3x DisplayPort 2.1b.
The Verdict
The recorded data shows no overlap in performance class between these two GPUs. The RTX 5090 SE delivers 6.3x the FP32 throughput, 6.3x the texture rate, 2.3x the pixel rate, and 9.3x the memory bandwidth of the RX 9050 OEM. It also carries 6x the memory capacity, 13.75x the shading units, 6.9x the TMUs, 2.5x the ROPs, and 6.9x the RT cores. The NVIDIA card launches at 1,499 USD as its launch MSRP, but no price data exists for the AMD card.
The RX 9050 OEM counters with a 92 W TDP, a 250 W suggested PSU, and a smaller die at 199 mm². It boosts to 2600 MHz, higher than the NVIDIA card's 2377 MHz, and it uses a 4 nm process versus 5 nm. For workloads bounded by power draw or physical size, the AMD part is the only viable choice from these two. For workloads bounded by compute, memory, or rendering throughput, the NVIDIA card dominates every recorded metric.
The data does not support any scenario where the RX 9050 OEM outperforms the RTX 5090 SE in raw performance. The win counts remain zero for both because no benchmarks exist, but the specification deltas are so large that any future benchmark would likely confirm the hierarchy. The RTX 5090 SE targets high-end rendering and compute; the RX 9050 OEM targets low-power, compact configurations. The database currently lacks the measurements needed to quantify real-world performance, so the verdict rests entirely on the architectural and specification records.
FAQ
Q: Which GPU has higher FP32 performance?
A: The NVIDIA GeForce RTX 5090 SE records 66.94 TFLOPS of FP32, while the AMD Radeon RX 9050 OEM records 10.65 TFLOPS, a 6.3x difference.
Q: What are the memory configurations?
A: The RX 9050 OEM uses 4 GB of GDDR6 on a 64-bit bus with 144.0 GB/s bandwidth. The RTX 5090 SE uses 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth.
Q: How do the power requirements compare?
A: The RX 9050 OEM has a TDP of 92 W and a suggested PSU of 250 W. The RTX 5090 SE has a TDP of 500 W and a suggested PSU of 900 W.
Q: What process nodes do the two chips use?
A: The AMD Navi 44 chip uses a 4 nm process, while the NVIDIA GB202 chip uses a 5 nm process. Both are fabricated by TSMC.
Q: Do both cards support the same APIs?
A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Both also use PCIe 5.0 x16.
Q: What are the physical dimensions of each card?
A: The database lists no dimensions for the RX 9050 OEM. The RTX 5090 SE measures 267 mm in length, 111 mm in height, and 40 mm in width.
Architecture Differences
The AMD Radeon RX 9050 OEM uses the Navi 44 chip built on RDNA 4.0 architecture, belonging to the Navi IV generation within the RX 9000 series. The NVIDIA GeForce RTX 5090 SE uses the GB202 chip built on Blackwell 2.0 architecture, belonging to the GeForce 50 generation. Both are manufactured by TSMC, but the AMD chip uses a 4 nm process while the NVIDIA chip uses a 5 nm process.
Transistor counts diverge sharply. The Navi 44 die contains 29,700 million transistors on a 199 mm² die, yielding a transistor density of 149.2M per mm². The GB202 die contains 92,200 million transistors on a 750 mm² die, yielding a density of 122.9M per mm². The AMD chip packs more transistors per area despite having far fewer total transistors, which aligns with its lower 92 W TDP.
The compute architectures differ in execution unit composition. The RX 9050 OEM has 1,024 shading units, 64 TMUs, 64 ROPs, and 16 RT cores, with no tensor cores listed. The RTX 5090 SE has 14,080 shading units, 440 TMUs, 160 ROPs, 110 RT cores, and 440 tensor cores. The NVIDIA card includes tensor cores, a feature absent from the AMD entry. Both cards support ray tracing through their respective RT core counts, but the NVIDIA part carries nearly 7x more RT cores.
Clock behavior differs as well. The AMD card has a base clock of 1330 MHz, a game clock of 1920 MHz, and a boost clock of 2600 MHz. The NVIDIA card has a base clock of 1740 MHz, no game clock listed, and a boost clock of 2377 MHz. The AMD part boosts higher, but the NVIDIA part starts from a higher base. Memory clocks also differ: the AMD card runs at 2250 MHz with 18 Gbps effective, while the NVIDIA card runs at 1750 MHz with 28 Gbps effective.
The display output configurations vary. The AMD card provides one HDMI 2.1b port and two DisplayPort 2.1a ports. The NVIDIA card provides one HDMI 2.1b port and three DisplayPort 2.1b ports. Both support the same API levels, including DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so software compatibility at the API level is identical.
Specification Differences
The two GPUs differ across nearly every recorded specification. The RX 9050 OEM uses GDDR6 memory, while the RTX 5090 SE uses GDDR7. Memory capacity is 4 GB versus 24 GB, bus width is 64-bit versus 384-bit, and bandwidth is 144.0 GB/s versus 1.34 TB/s.
Shading units number 1,024 versus 14,080. TMUs number 64 versus 440. ROPs number 64 versus 160. RT cores number 16 versus 110. Tensor cores are absent on the AMD card and number 440 on the NVIDIA card. FP32 performance is 10.65 TFLOPS versus 66.94 TFLOPS, and FP16 performance matches the FP32 figures at a 1:1 ratio on both cards.
Pixel rate is 166.4 GPixel/s versus 380.3 GPixel/s. Texture rate is 166.4 GTexel/s versus 1,045.9 GTexel/s. TDP is 92 W versus 500 W. Power connectors are 1x 8-pin versus 1x 16-pin. Suggested PSU is 250 W versus 900 W. Both are dual-slot cards and use PCIe 5.0 x16.
Release dates differ. The RX 9050 OEM released on 2026-07-27, while the RTX 5090 SE released on 2025-12-31. The AMD card's predecessor is Navi III, while the NVIDIA card's predecessor is GeForce 40. The NVIDIA card has a recorded successor, GeForce 60, while the AMD card has none listed. The RTX 5090 SE has a launch MSRP of 1,499 USD; the AMD card has no launch MSRP recorded. The production status for both is Active.