AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5050 Comparison
AMD Radeon RX 9050 OEM
GeForce RTX 5050
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5050
Head-to-Head Benchmarks
The benchmark database contains no direct head-to-head benchmark results for the AMD Radeon RX 9050 OEM versus the NVIDIA GeForce RTX 5050. The RX 9050 OEM has no recorded benchmark scores, while the RTX 5050 has a set of ten recorded tests. The RTX 5050's average benchmark score is 21,035, which places it in the 66th percentile of all GPUs in the database. The RX 9050 OEM's average benchmark score is zero, and it sits in the 50th percentile, a position based on its hardware specifications rather than measured performance.
Since the RX 9050 OEM has no recorded scores, the RTX 5050 holds a nominal lead in every available comparison by default. The RTX 5050's recorded scores include a 3DMark Steel Nomad DX12 result of 2,502, a Geekbench OpenCL score of 90,334, and a Geekbench Vulkan score of 89,381. In PassMark tests, the RTX 5050 scores 17,326 in G3D, 9,184 in GPU Compute, 1,113 in G2D, 186 in DirectX 9, 150 in DirectX 11, 103 in DirectX 10, and 66 in DirectX 12. The RX 9050 OEM has no comparable entries in any of these tests.
The RTX 5050's nearest rivals in the database provide context for its performance tier. The AMD Radeon RX Vega M GL averages 21,153, which is 0.6 percent below the RTX 5050. The AMD Radeon HD 8970M averages 21,237, a 1 percent deficit. The AMD Radeon RX 5600 XT averages 20,713, which is 1.6 percent higher than the RTX 5050. The NVIDIA RTX A4000 Mobile averages 21,379, a 1.6 percent gap. These deltas show the RTX 5050 sitting in a narrow band of performance, clustered within roughly two percent of four established cards.
The absence of RX 9050 OEM benchmark data means the database cannot confirm any performance advantage for either card. The RTX 5050's 66th percentile ranking indicates it outperforms roughly two-thirds of all GPUs in the database, while the RX 9050 OEM's 50th percentile reflects a median position that is not backed by any measured scores. Buyers comparing these two cards have no benchmark-based evidence that the AMD part delivers competitive or superior results in any specific test.
Architecture Differences
The two cards use different process nodes, with the RX 9050 OEM built on a 4 nm process and the RTX 5050 on a 5 nm process, both from TSMC. The AMD part uses the Navi 44 chip with RDNA 4.0 architecture, part of the Navi IV (RX 9000) generation. The NVIDIA part uses the GB207 chip with Blackwell 2.0 architecture, part of the GeForce 50 generation. The RX 9050 OEM packs 29,700 million transistors onto a 199 mm² die, giving a transistor density of 149.2 million per square millimeter. The RTX 5050 contains 16,900 million transistors on a 149 mm² die, for a density of 113.4 million per square millimeter. The AMD chip has roughly 75 percent more transistors and a larger die, but the NVIDIA chip achieves higher raw FP32 throughput.
Shading hardware differs substantially. The RX 9050 OEM has 1,024 shading units, 64 texture mapping units, and 64 ROPs. The RTX 5050 has 2,560 shading units, 80 TMUs, and only 32 ROPs. The RTX 5050 has 16 ray tracing cores and 80 tensor cores, while the RX 9050 OEM has 16 ray tracing cores and no tensor cores. The AMD card's pixel rate is 166.4 GPixel/s, more than double the RTX 5050's 82.30 GPixel/s, due to the AMD card's 64 ROPs versus the NVIDIA card's 32. The texture rate tells the opposite story: the RTX 5050 reaches 205.8 GTexel/s, while the RX 9050 OEM manages 166.4 GTexel/s. In FP32 compute, the RTX 5050 delivers 13.17 TFLOPS, which is about 24 percent higher than the RX 9050 OEM's 10.65 TFLOPS. Both cards support the same API set: DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Memory architecture is a major point of divergence. The RX 9050 OEM uses 4 GB of GDDR6 on a 64 bit bus, yielding 144.0 GB/s of bandwidth. The RTX 5050 uses 8 GB of GDDR6 on a 128 bit bus, yielding 320.0 GB/s of bandwidth. That is 2.2 times the bandwidth and double the capacity. The RTX 5050 also runs faster memory at 2500 MHz (20 Gbps effective) versus the RX 9050 OEM's 2250 MHz (18 Gbps effective). The RTX 5050 connects via PCIe 5.0 x8, while the RX 9050 OEM uses PCIe 5.0 x16, giving the AMD card twice the interface width despite its smaller memory bus.
Clock behavior also differs. The RX 9050 OEM has a base clock of 1330 MHz, a game clock of 1920 MHz, and a boost clock of 2600 MHz. The RTX 5050 has a higher base clock of 2317 MHz and a boost clock of 2572 MHz, but it has no game clock field. The AMD card's boost clock is slightly higher, but the NVIDIA card runs a much higher base clock, which suggests more consistent minimum performance. Power characteristics are not equal: the RX 9050 OEM has a TDP of 92 W and a suggested PSU of 250 W, while the RTX 5050 has a TDP of 130 W and a suggested PSU of 300 W. Both are dual-slot cards and use a single 8-pin power connector.
The Verdict
The data in the database is one-sided. The RTX 5050 has a full set of benchmark scores, an average score of 21,035, and a 66th percentile ranking. The RX 9050 OEM has no benchmark scores and a 50th percentile ranking that is not supported by any measured results. Any performance comparison between these two cards must rely on specifications alone, and those specifications favor the RTX 5050 in the areas that matter most for modern workloads.
The RTX 5050 has 8 GB of VRAM versus 4 GB, 320.0 GB/s of bandwidth versus 144.0 GB/s, 2,560 shading units versus 1,024, 80 tensor cores versus none, and higher FP32 throughput at 13.17 TFLOPS versus 10.65 TFLOPS. The RX 9050 OEM counters with a 4 nm node, a higher ROP count at 64 versus 32, a higher pixel rate at 166.4 GPixel/s versus 82.30 GPixel/s, and a wider PCIe 5.0 x16 interface versus x8. The RX 9050 OEM also has a lower TDP at 92 W versus 130 W, which makes it the more power-efficient option on paper.
The RTX 5050's nearest rivals bracket its performance tightly: the RX Vega M GL is 0.6 percent behind, the HD 8970M is 1 percent behind, the RX 5600 XT is 1.6 percent ahead, and the RTX A4000 Mobile is 1.6 percent ahead. This clustering places the RTX 5050 in a well-understood performance tier. The RX 9050 OEM has no comparable anchor points in the database, so its real-world standing cannot be verified.
Based strictly on the recorded data, the RTX 5050 is the safer choice for anyone who needs confirmed performance. The RX 9050 OEM is an unproven quantity in the database, and its specification advantages in ROPs and pixel rate do not compensate for its smaller memory capacity, lower bandwidth, fewer shading units, and absence of tensor cores.
FAQ
Q: Which card has a higher average benchmark score?
A: The RTX 5050 has an average benchmark score of 21,035. The RX 9050 OEM has an average benchmark score of zero because no benchmark results are recorded for it.
Q: How much memory does each card have?
A: The RX 9050 OEM has 4 GB of GDDR6 on a 64 bit bus with 144.0 GB/s bandwidth. The RTX 5050 has 8 GB of GDDR6 on a 128 bit bus with 320.0 GB/s bandwidth.
Q: Which card has more shading units?
A: The RTX 5050 has 2,560 shading units. The RX 9050 OEM has 1,024 shading units.
Q: Does the RX 9050 OEM have tensor cores?
A: No. The RX 9050 OEM has no tensor cores, while the RTX 5050 has 80 tensor cores.
Q: What is the process node difference?
A: The RX 9050 OEM is built on a 4 nm process, while the RTX 5050 is built on a 5 nm process. Both are manufactured by TSMC.
Q: Which card has a higher FP32 compute throughput?
A: The RTX 5050 delivers 13.17 TFLOPS of FP32 compute. The RX 9050 OEM delivers 10.65 TFLOPS.
Where Each One Wins
The RTX 5050 wins in raw compute throughput. Its 13.17 TFLOPS FP32 performance exceeds the RX 9050 OEM's 10.65 TFLOPS by roughly 24 percent. It also doubles the memory capacity at 8 GB versus 4 GB, more than doubles memory bandwidth at 320.0 GB/s versus 144.0 GB/s, and has a wider 128 bit memory bus versus 64 bit. The RTX 5050's 2,560 shading units give it a substantial advantage in shader-heavy workloads, and its 80 tensor cores provide hardware support for AI and tensor operations that the RX 9050 OEM entirely lacks. The RTX 5050 also has a higher texture rate at 205.8 GTexel/s versus 166.4 GTexel/s, and its 80 TMUs outnumber the RX 9050 OEM's 64.
The RX 9050 OEM wins in rasterization throughput. Its 64 ROPs double the RTX 5050's 32, and its pixel rate of 166.4 GPixel/s is more than double the RTX 5050's 82.30 GPixel/s. This suggests the AMD card can fill pixels faster in fill-rate-limited scenarios, even though its shading and memory subsystems are smaller. The RX 9050 OEM also uses a 4 nm process, which is one step denser than the RTX 5050's 5 nm node, and it integrates more transistors at 29,700 million versus 16,900 million on a larger 199 mm² die versus 149 mm². The RX 9050 OEM has a lower TDP at 92 W versus 130 W, and it uses a PCIe 5.0 x16 interface, which offers twice the connection width of the RTX 5050's PCIe 5.0 x8. For a system with limited power delivery, the RX 9050 OEM is the more restrained option.
Specification Differences
The two cards differ across nearly every major specification field. The RX 9050 OEM uses the Navi 44 chip with RDNA 4.0 architecture, while the RTX 5050 uses the GB207 chip with Blackwell 2.0. The process node is 4 nm for AMD and 5 nm for NVIDIA. Transistor counts stand at 29,700 million for the RX 9050 OEM and 16,900 million for the RTX 5050. Die sizes are 199 mm² and 149 mm², respectively, with transistor densities of 149.2 million per square millimeter and 113.4 million per square millimeter.
Clocks differ as well. The RX 9050 OEM has a base clock of 1330 MHz, a game clock of 1920 MHz, and a boost clock of 2600 MHz. The RTX 5050 has a base clock of 2317 MHz, no game clock, and a boost clock of 2572 MHz. Memory clocks are 2250 MHz (18 Gbps effective) for AMD and 2500 MHz (20 Gbps effective) for NVIDIA. Memory capacity is 4 GB versus 8 GB, bus width is 64 bit versus 128 bit, and bandwidth is 144.0 GB/s versus 320.0 GB/s.
Compute resources are split unevenly. The RX 9050 OEM has 1,024 shading units, 64 TMUs, 64 ROPs, 16 ray tracing cores, and no tensor cores. The RTX 5050 has 2,560 shading units, 80 TMUs, 32 ROPs, 20 ray tracing cores, and 80 tensor cores. Pixel rates are 166.4 GPixel/s for AMD and 82.30 GPixel/s for NVIDIA. Texture rates are 166.4 GTexel/s for AMD and 205.8 GTexel/s for NVIDIA. FP32 and FP16 throughput are both 10.65 TFLOPS for AMD and 13.17 TFLOPS for NVIDIA, with both cards running FP16 at a 1:1 ratio.
Power and connectivity also differ. The RX 9050 OEM has a TDP of 92 W and a suggested PSU of 250 W. The RTX 5050 has a TDP of 130 W and a suggested PSU of 300 W. Both cards are dual-slot and use one 8-pin power connector. The RX 9050 OEM uses PCIe 5.0 x16, while the RTX 5050 uses PCIe 5.0 x8. Display outputs are 1x HDMI 2.1b and 2x DisplayPort 2.1a for AMD, versus 1x HDMI 2.1b and 3x DisplayPort 2.1b for NVIDIA. The API support is identical: DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4 on both cards. Production status is Active for both, with the RX 9050 OEM listed as the successor to Navi III and the RTX 5050 succeeding GeForce 40 with GeForce 60 as its successor. The RTX 5050 has a launch MSRP of 249 USD; the RX 9050 OEM has no launch MSRP recorded.