AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5090 D V2 Comparison

AMD
RADEON

AMD Radeon RX 9050 OEM

CORE STATE Navi 44
VRAM 4 GB
CLOCK SPEED 2600 MHz
TDP 92 W
BUS WIDTH 64 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5090 D V2

CORE STATE GB202
VRAM 24 GB
CLOCK SPEED 2407 MHz
TDP 575 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
16,504

Analysis: AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5090 D V2

The Verdict

The data presents a stark contrast between two GPUs aimed at entirely different segments. The AMD Radeon RX 9050 OEM is a low-power, entry-level part designed for basic OEM systems, while the NVIDIA GeForce RTX 5090 D V2 is a high-end, flagship-tier add-in board. The RTX 5090 D V2 delivers overwhelming performance dominance, with its recorded 3DMark Steel Nomad DX12 score of 16,504 placing it in the 59th percentile of all GPUs. The RX 9050 OEM, with no recorded benchmark scores and a 50th percentile rating, offers a different set of priorities: minimal power draw and a compact design. The RTX 5090 D V2 is the only choice for demanding workloads, whereas the RX 9050 OEM suits a basic display-out and light-compute role. The performance gap is so vast that these products do not compete in the same market; the choice is dictated by the required workload, not preference.

The RTX 5090 D V2's launch MSRP is 2,299 USD. It sits among rivals like the NVIDIA T400 (scoring 16,508), the AMD Radeon PRO W7500 (16,415), and the NVIDIA RTX PRO 6000 Blackwell (16,408), all within a 0.9% performance delta. This proximity confirms the RTX 5090 D V2 is a high-end performer that trades blows with professional workstation cards. The RX 9050 OEM has no such rivals listed, indicating its unique position as a low-tier OEM part with no direct performance competition in the database.

Architecture Differences

The two GPUs are built on different architectures and process nodes, reflecting their divergent purposes. The AMD Radeon RX 9050 OEM uses the Navi 44 chip on the RDNA 4.0 architecture, part of the Navi IV (RX 9000) generation. It is manufactured on a 4 nm process at TSMC, with 29,700 million transistors on a 199 mm² die, yielding a transistor density of 149.2M per mm². In contrast, the NVIDIA GeForce RTX 5090 D V2 uses the GB202 chip on the Blackwell 2.0 architecture, from the GeForce 50 generation. It is built on a 5 nm process, also at TSMC, with 92,200 million transistors on a 750 mm² die, giving a lower transistor density of 122.9M per mm².

The compute resources differ by an order of magnitude. The RX 9050 OEM has 1,024 shading units, 64 texture mapping units (TMUs), and 64 raster operation units (ROPs). It includes 16 ray tracing (RT) cores and has no tensor cores. The RTX 5090 D V2, however, features 21,760 shading units, 680 TMUs, and 176 ROPs. It carries 170 RT cores and 680 tensor cores, the latter enabling AI-accelerated features that the AMD part lacks entirely.

Memory architecture is another fundamental split. The RX 9050 OEM uses 4 GB of GDDR6 on a 64-bit bus, delivering 144.0 GB/s of bandwidth. The RTX 5090 D V2 uses 24 GB of GDDR7 on a 384-bit bus, providing 1.34 TB/s of bandwidth. Clock speeds also differ: the AMD part runs a base of 1330 MHz, a game clock of 1920 MHz, and a boost of 2600 MHz, with memory at 2250 MHz (18 Gbps effective). The NVIDIA part has a higher base of 2017 MHz and a boost of 2407 MHz, with memory at 1750 MHz (28 Gbps effective). The AMD part's higher boost clock does not compensate for its far smaller compute and memory resources.

Head-to-Head Benchmarks

The database records no direct head-to-head benchmark comparisons between these two GPUs, and the AMD part has no benchmark scores at all. The only recorded performance data belongs to the NVIDIA GeForce RTX 5090 D V2, which scores 16,504 in the 3DMark Steel Nomad DX12 test. This score positions it just behind the NVIDIA T400 (16,508, a 0% delta) and ahead of the AMD Radeon PRO W7500 (16,415, a 0.5% delta) and the NVIDIA RTX PRO 6000 Blackwell (16,408, a 0.6% delta). It also leads the AMD Radeon RX 5700 XT (16,361, a 0.9% delta).

The RX 9050 OEM's lack of recorded benchmarks means no direct comparison can be made from the database. Its theoretical compute rates, however, indicate a massive gulf. The RX 9050 OEM delivers 10.65 TFLOPS of FP32 and FP16 performance, while the RTX 5090 D V2 delivers 104.8 TFLOPS in both precisions, roughly ten times the raw compute. Pixel and texture rates follow the same pattern: the AMD part produces 166.4 GPixel/s and 166.4 GTexel/s, while the NVIDIA part produces 423.6 GPixel/s and 1,636.8 GTexel/s. The RTX 5090 D V2 is faster by a factor of roughly 2.5 in pixel throughput and nearly 10 in texture throughput.

The RTX 5090 D V2 also shows its standing among high-end rivals. Its 16,504 score is essentially tied with the NVIDIA T400, which is unusual given the T400 is a low-profile professional card. The delta of 0% against the T400, 0.5% against the Radeon PRO W7500, and 0.6% against the RTX PRO 6000 Blackwell suggests that this particular 3DMark workload is not heavily dependent on the massive compute resources of the RTX 5090 D V2; the smaller professional cards match it in this specific test. The RX 9050 OEM has no comparable data to analyze.

FAQ

Q: Which GPU has higher raw compute performance?

A: The NVIDIA GeForce RTX 5090 D V2 delivers 104.8 TFLOPS of FP32 and FP16 performance, compared to the AMD Radeon RX 9050 OEM's 10.65 TFLOPS in both precisions.

Q: What is the memory capacity difference?

A: The RTX 5090 D V2 has 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth, while the RX 9050 OEM has 4 GB of GDDR6 on a 64-bit bus with 144.0 GB/s bandwidth.

Q: How do the power requirements compare?

A: The RX 9050 OEM has a TDP of 92 W with a suggested PSU of 250 W and a single 8-pin connector. The RTX 5090 D V2 has a TDP of 575 W, a suggested PSU of 950 W, and a single 16-pin connector.

Q: Does the AMD GPU have tensor cores?

A: No, the RX 9050 OEM has no tensor cores. The RTX 5090 D V2 has 680 tensor cores.

Q: What is the recorded benchmark score for the RTX 5090 D V2?

A: The RTX 5090 D V2 scores 16,504 in 3DMark Steel Nomad DX12, placing it in the 59th percentile of all GPUs. The RX 9050 OEM has no recorded benchmark scores.

Q: Which GPU has more ray tracing cores?

A: The RTX 5090 D V2 has 170 RT cores, while the RX 9050 OEM has 16 RT cores.

Where Each One Wins

The AMD Radeon RX 9050 OEM wins in efficiency and compactness. Its 92 W TDP and 250 W suggested PSU require far less system power, and its single 8-pin connector simplifies installation. With a 4 nm process and 199 mm² die, it is a small, low-power part suitable for basic OEM desktops where minimal footprint and heat output are priorities. Its 1,024 shading units and 64 TMUs handle light graphical tasks, and its 16 RT cores provide entry-level ray tracing capability. The 4 GB memory on a 64-bit bus is sufficient for basic display output and undemanding applications. It is an active production part, indicating ongoing availability for system builders.

The NVIDIA GeForce RTX 5090 D V2 wins decisively in every performance metric. Its 104.8 TFLOPS compute, 24 GB GDDR7 memory, and 1.34 TB/s bandwidth enable high-resolution gaming, professional rendering, and AI workloads. The 680 tensor cores and 170 RT cores provide advanced features absent from the AMD part. Its 3DMark Steel Nomad score of 16,504 places it among professional workstation cards like the NVIDIA T400 and RTX PRO 6000 Blackwell, confirming its capability in demanding DX12 workloads. The 575 W TDP and 950 W suggested PSU indicate a system requirement of substantial power delivery, but the performance return is proportionally large. Its dimensions of 304 mm length, 137 mm height, and 48 mm width show a physically large card that needs ample chassis space.

The recorded data shows no overlap in use cases. The RX 9050 OEM targets low-power, basic systems where performance is secondary to cost and simplicity. The RTX 5090 D V2 targets high-end systems where maximum throughput is the primary requirement, regardless of power consumption or physical size. The RTX 5090 D V2's predecessor is the GeForce 40 series, and its successor is the GeForce 60 series, indicating it sits at the top of the current generation. The RX 9050 OEM's predecessor is Navi III, with no successor listed.

Specification Differences

The two GPUs differ in nearly every recorded specification. The process node differs: the RX 9050 OEM uses 4 nm, the RTX 5090 D V2 uses 5 nm. Transistor count is 29,700 million versus 92,200 million, and die size is 199 mm² versus 750 mm². Transistor density is higher on the AMD part at 149.2M per mm² versus 122.9M per mm².

Clock speeds: the AMD part has a base of 1330 MHz, a game clock of 1920 MHz, and a boost of 2600 MHz. The NVIDIA part has a base of 2017 MHz and a boost of 2407 MHz, with no game clock listed. Memory clocks are 2250 MHz (18 Gbps effective) for AMD and 1750 MHz (28 Gbps effective) for NVIDIA.

Memory: 4 GB GDDR6 on a 64-bit bus with 144.0 GB/s bandwidth versus 24 GB GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth.

Compute units: 1,024 shading units, 64 TMUs, 64 ROPs, 16 RT cores, and no tensor cores for AMD. NVIDIA has 21,760 shading units, 680 TMUs, 176 ROPs, 170 RT cores, and 680 tensor cores.

Rates: the AMD part produces 166.4 GPixel/s and 166.4 GTexel/s, with 10.65 TFLOPS FP32 and FP16. The NVIDIA part produces 423.6 GPixel/s and 1,636.8 GTexel/s, with 104.8 TFLOPS FP32 and FP16.

Power: 92 W TDP, 250 W suggested PSU, and 1x 8-pin connector for AMD. NVIDIA uses 575 W TDP, 950 W suggested PSU, and 1x 16-pin connector.

Physical: both are dual-slot, but the NVIDIA part has recorded dimensions of 304 mm length, 137 mm height, and 48 mm width. The AMD part has no dimensions recorded.

Display outputs: the AMD part has 1x HDMI 2.1b and 2x DisplayPort 2.1a. The NVIDIA part has 1x HDMI 2.1b and 3x DisplayPort 2.1b.

APIs: both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Release dates: the RX 9050 OEM released on 2026-07-27, while the RTX 5090 D V2 released earlier on 2025-08-14. The NVIDIA part has a launch MSRP of 2,299 USD; the AMD part has no launch MSRP recorded. Both use PCIe 5.0 x16 interfaces and are active production parts.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9050 OEM
RTX 5090 D V2
Core Specs
Shading Units
1,024
21,760 +2025.0%
Shaders
1,024
21,760 +2025.0%
TMUs
64
680 +962.5%
ROPs
64
176 +175.0%
Compute Units
16
—
SM Count
—
170
Clocks
Base Clock
1330 MHz
2017 MHz
Boost Clock
2600 MHz
2407 MHz
Game Clock
1920 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
24 GB
VRAM (MB)
4,096
24,576 +500.0%
Memory Type
GDDR6
GDDR7
Memory Bus
64 bit
384 bit
Bandwidth
144.0 GB/s
1.34 TB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
2 MB
96 MB
L3 Cache
16 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
166.4 GPixel/s
423.6 GPixel/s
Texture Rate
166.4 GTexel/s
1,636.8 GTexel/s
FP32 (TFLOPS)
10.65 TFLOPS
104.8 TFLOPS
FP64 (TFLOPS)
332.8 GFLOPS (1:32)
1.637 TFLOPS (1:64)
FP16 (TFLOPS)
10.65 TFLOPS (1:1)
104.8 TFLOPS (1:1)
AI/RT
RT Cores
16
170 +962.5%
Tensor Cores
—
680
Matrix Cores
32
—
Power
TDP
92 W
575 W
TDP (W)
92
575 +525.0%
Suggested PSU
250 W
950 W
Power Connectors
1x 8-pin
1x 16-pin
Architecture
Architecture
RDNA 4.0
Blackwell 2.0
GPU Name
Navi 44
GB202
Generation
Navi IV (RX 9000)
GeForce 50
Process Size
4 nm
5 nm
Transistors
29,700 million
92,200 million
Die Size
199 mm²
750 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
122.9M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
Dual-slot
Dual-slot
Length
—
304 mm 12 inches
Height
—
137 mm 5.4 inches
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x16
Other
Launch Price
—
2,299 USD
Production
Active
Active
Predecessor
Navi III
GeForce 40
Successor
—
GeForce 60
View Radeon RX 9050 OEM Details View GeForce RTX 5090 D V2 Details