AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5060 GB205 Comparison

AMD
RADEON

AMD Radeon RX 9050 OEM

CORE STATE Navi 44
VRAM 4 GB
CLOCK SPEED 2600 MHz
TDP 92 W
BUS WIDTH 64 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5060 GB205

CORE STATE GB205
VRAM 8 GB
CLOCK SPEED 2497 MHz
TDP 145 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2026

Analysis: AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5060 GB205

Head-to-Head Benchmarks

The database records no benchmark scores for either the AMD Radeon RX 9050 OEM or the NVIDIA GeForce RTX 5060 GB205. Both cards sit at the 50th percentile among all GPUs in the database, with an average benchmark score of zero. This means direct performance comparison relies entirely on architectural and specification data rather than measured application results. The absence of recorded scores does not indicate equal performance, but it does limit head-to-head analysis to what the hardware specifications reveal.

The most significant computational advantage belongs to the RTX 5060. Its FP32 throughput of 19.18 TFLOPS is nearly double the 10.65 TFLOPS of the RX 9050 OEM. That is an 80% advantage in raw shader compute, which directly influences rasterization performance, compute workloads, and general GPU throughput. The RTX 5060 also delivers 19.18 TFLOPS of FP16 performance at a 1:1 ratio, matching its FP32 output; the RX 9050 OEM similarly achieves 10.65 TFLOPS FP16 at 1:1. In texture-heavy scenes, the RTX 5060 produces 299.6 GTexel/s versus 166.4 GTexel/s for the RX 9050 OEM, a 80% lead in texture fill rate.

Pixel fill rate is the one area where the RX 9050 OEM leads. It achieves 166.4 GPixel/s compared to 119.9 GPixel/s for the RTX 5060, a 38.8% advantage. This stems from the RX 9050 OEM having 64 ROPs versus 48 ROPs on the RTX 5060, despite the latter having a higher core count and faster clock speeds. For pure rasterization at lower resolutions where pixel throughput becomes the limiting factor, the AMD card holds an edge.

Memory bandwidth heavily favors the RTX 5060. Its GDDR7 memory on a 128-bit bus delivers 448.0 GB/s, which is 3.1 times the 144.0 GB/s of the RX 9050 OEM. The RTX 5060 also has twice the memory capacity at 8 GB versus 4 GB. This bandwidth differential becomes critical for 1440p and 4K workloads, texture streaming, and ray tracing operations that rely on rapid memory access.

Clock speeds present a mixed picture. The RTX 5060 has a much higher base clock at 2280 MHz versus 1330 MHz for the RX 9050 OEM, a 71.4% difference. However, the boost clocks are closer: 2497 MHz for NVIDIA versus 2600 MHz for AMD, meaning the RX 9050 OEM actually boosts 4.1% higher. The AMD card also specifies a game clock of 1920 MHz, while the NVIDIA card lists no game clock in the database.

FAQ

Q: Which card has higher raw compute throughput?

A: The NVIDIA GeForce RTX 5060 GB205 delivers 19.18 TFLOPS FP32, while the AMD Radeon RX 9050 OEM delivers 10.65 TFLOPS FP32. The RTX 5060 also matches this with 19.18 TFLOPS FP16, whereas the RX 9050 OEM offers 10.65 TFLOPS FP16.

Q: How do the memory configurations compare?

A: The RTX 5060 uses 8 GB of GDDR7 on a 128-bit bus with 448.0 GB/s bandwidth. The RX 9050 OEM uses 4 GB of GDDR6 on a 64-bit bus with 144.0 GB/s bandwidth. The NVIDIA card has twice the capacity and over three times the bandwidth.

Q: What are the pixel fill rates for each card?

A: The RX 9050 OEM achieves 166.4 GPixel/s, which is higher than the 119.9 GPixel/s of the RTX 5060. This comes from the AMD card having 64 ROPs versus 48 ROPs on the NVIDIA card.

Q: Which card has more shader units and TMUs?

A: The RTX 5060 has 3840 shading units and 120 texture mapping units. The RX 9050 OEM has 1024 shading units and 64 TMUs. The NVIDIA card has 3.75 times the shader units and 1.875 times the TMUs.

Q: How do the power requirements differ?

A: The RX 9050 OEM has a TDP of 92 W with a suggested PSU of 250 W. The RTX 5060 has a TDP of 145 W with a suggested PSU of 300 W. Both use a single 8-pin power connector and are dual-slot cards.

Q: What ray tracing hardware does each card include?

A: The RTX 5060 includes 30 RT cores and 120 tensor cores. The RX 9050 OEM includes 16 RT cores and no tensor cores listed in the database.

Where Each One Wins

The RX 9050 OEM wins in scenarios where pixel throughput is the primary constraint. Its 166.4 GPixel/s pixel rate, driven by 64 ROPs, gives it a 38.8% advantage over the RTX 5060. This matters most for traditional rasterized rendering at 1080p with high anti-aliasing settings, where the GPU must write many pixels per frame. The AMD card also operates at a lower TDP of 92 W, making it suitable for systems with modest power budgets or compact cases where heat dissipation is limited. Its 4 nm process node and smaller die size of 199 mm² suggest efficient packing of its 29,700 million transistors.

The RTX 5060 wins in almost every other measurable category. Its 19.18 TFLOPS FP32 throughput is 80.2% higher, and its 299.6 GTexel/s texture rate is 80.0% higher. The 448.0 GB/s memory bandwidth is 211.1% higher, which directly benefits high-resolution textures, large scene complexity, and any workload that streams data through memory. The 8 GB capacity versus 4 GB means the NVIDIA card can hold larger assets in VRAM without spilling to system memory. The RTX 5060 also includes 120 tensor cores, enabling AI-accelerated features such as DLSS-style upscaling and neural network inference, while the RX 9050 OEM has no tensor core count in the database. The RTX 5060 has 30 RT cores versus 16, giving it more dedicated ray tracing hardware.

For compute-heavy tasks like rendering, simulation, or machine learning inference, the RTX 5060's higher shader count and FP32 output provide a clear path to better performance. The NVIDIA card also has a higher base clock of 2280 MHz, which suggests sustained performance under load, even though its boost clock is slightly lower than the AMD card's 2600 MHz.

Specification Differences

The two cards differ across nearly every core specification. The RX 9050 OEM uses a 4 nm process from TSMC, while the RTX 5060 uses a 5 nm process from the same foundry. The AMD chip contains 29,700 million transistors on a 199 mm² die, giving a transistor density of 149.2M per mm². The NVIDIA chip packs 31,100 million transistors onto a 263 mm² die, with a density of 118.3M per mm². The RTX 5060 has more transistors but lower density due to the larger die.

Memory configurations are substantially different. The RX 9050 OEM has 4 GB GDDR6 on a 64-bit bus with 144.0 GB/s bandwidth. The RTX 5060 has 8 GB GDDR7 on a 128-bit bus with 448.0 GB/s bandwidth. Effective memory clock is 18 Gbps for AMD and 28 Gbps for NVIDIA.

Compute resources differ sharply. The RX 9050 OEM has 1024 shading units, 64 TMUs, and 64 ROPs. The RTX 5060 has 3840 shading units, 120 TMUs, and 48 ROPs. Ray tracing hardware: 16 RT cores for AMD, 30 RT cores for NVIDIA. Tensor cores: none listed for AMD, 120 for NVIDIA.

Clock speeds: base clock 1330 MHz versus 2280 MHz, boost clock 2600 MHz versus 2497 MHz, game clock 1920 MHz for AMD only. Power: TDP 92 W versus 145 W, suggested PSU 250 W versus 300 W. Both use a single 8-pin connector and are dual-slot.

Bus interface: PCIe 5.0 x16 for AMD versus PCIe 5.0 x8 for NVIDIA. Display outputs: AMD has 1x HDMI 2.1b and 2x DisplayPort 2.1a; NVIDIA has 1x HDMI 2.1b and 3x DisplayPort 2.1b. Physical dimensions are only listed for the RTX 5060: 241 mm long, 111 mm high, 40 mm wide.

Architecture Differences

The RX 9050 OEM uses the Navi 44 chip built on RDNA 4.0 architecture, part of the Navi IV (RX 9000) generation. It succeeds the Navi III architecture. The RTX 5060 uses the GB205 chip built on Blackwell 2.0 architecture, part of the GeForce 50 generation. It succeeds the GeForce 40 generation and has a listed successor in GeForce 60.

The process nodes differ: TSMC 4 nm for AMD versus TSMC 5 nm for NVIDIA. The AMD chip achieves higher transistor density at 149.2M per mm² versus 118.3M per mm², meaning it packs more transistors into less area despite having fewer total transistors (29,700 million versus 31,100 million).

The RTX 5060 includes tensor cores, which the database lists as 120. The RX 9050 OEM has no tensor core entry. This indicates support for AI acceleration on the NVIDIA card that is not present on the AMD card. Both cards support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

The RTX 5060 has a higher base clock (2280 MHz versus 1330 MHz) but a lower boost clock (2497 MHz versus 2600 MHz). The AMD card specifies a game clock of 1920 MHz, which the NVIDIA card does not list. The NVIDIA card uses GDDR7 memory, while the AMD card uses GDDR6. The RTX 5060 also has a wider memory bus (128-bit versus 64-bit) and higher effective memory speed (28 Gbps versus 18 Gbps).

Both cards are listed as Active in production status. The RX 9050 OEM has a release date in the database of 2026-07-27, while the RTX 5060 has a release date of 2026-05-31, making the NVIDIA card earlier to market by approximately two months.

The Verdict

The data points to the RTX 5060 as the stronger overall performer for most workloads. Its FP32 throughput is 80.2% higher, texture rate is 80.0% higher, memory bandwidth is 211.1% higher, and it has 3.75 times the shading units. The 8 GB memory capacity versus 4 GB is a substantial advantage for modern games and applications, which increasingly require more than 4 GB of VRAM. The inclusion of 120 tensor cores and 30 RT cores gives the NVIDIA card capabilities that the AMD card does not match in the database.

The RX 9050 OEM holds specific advantages that matter in narrower scenarios. Its 38.8% higher pixel fill rate, driven by 64 ROPs, benefits high-resolution rasterization with heavy anti-aliasing. Its lower TDP of 92 W versus 145 W makes it more power-efficient, and its higher boost clock of 2600 MHz suggests good peak performance in short bursts. The 4 nm process node and higher transistor density indicate a more compact, potentially more efficient design.

For a builder prioritizing raw compute, texture detail, memory capacity, and AI features, the RTX 5060 is the clear choice from the recorded specifications. For a builder with strict power limits, a focus on pixel-bound rendering, or a preference for AMD's RDNA architecture, the RX 9050 OEM offers a compelling alternative, albeit with significantly less memory bandwidth and shader throughput. The RTX 5060's launch MSRP is 299 USD, which the database records as its only pricing information. The AMD card has no launch MSRP listed.

The absence of benchmark scores means these conclusions come from specification analysis, not measured performance. The 50th percentile ranking for both cards suggests they sit in the middle of the database's GPU distribution, but the specification gaps are large enough that real-world performance differences are likely to be substantial in the RTX 5060's favor for compute-heavy and memory-intensive workloads.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9050 OEM
RTX 5060 GB205
Core Specs
Shading Units
1,024
3,840 +275.0%
Shaders
1,024
3,840 +275.0%
TMUs
64
120 +87.5%
ROPs
64
48 -25.0%
Compute Units
16
—
SM Count
—
30
Clocks
Base Clock
1330 MHz
2280 MHz
Boost Clock
2600 MHz
2497 MHz
Game Clock
1920 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
8 GB
VRAM (MB)
4,096
8,192 +100.0%
Memory Type
GDDR6
GDDR7
Memory Bus
64 bit
128 bit
Bandwidth
144.0 GB/s
448.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
2 MB
32 MB
L3 Cache
16 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
166.4 GPixel/s
119.9 GPixel/s
Texture Rate
166.4 GTexel/s
299.6 GTexel/s
FP32 (TFLOPS)
10.65 TFLOPS
19.18 TFLOPS
FP64 (TFLOPS)
332.8 GFLOPS (1:32)
299.6 GFLOPS (1:64)
FP16 (TFLOPS)
10.65 TFLOPS (1:1)
19.18 TFLOPS (1:1)
AI/RT
RT Cores
16
30 +87.5%
Tensor Cores
—
120
Matrix Cores
32
—
Power
TDP
92 W
145 W
TDP (W)
92
145 +57.6%
Suggested PSU
250 W
300 W
Power Connectors
1x 8-pin
1x 8-pin
Architecture
Architecture
RDNA 4.0
Blackwell 2.0
GPU Name
Navi 44
GB205
Generation
Navi IV (RX 9000)
GeForce 50
Process Size
4 nm
5 nm
Transistors
29,700 million
31,100 million
Die Size
199 mm²
263 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
118.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
Dual-slot
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x8
Other
Launch Price
—
299 USD
Production
Active
Active
Predecessor
Navi III
GeForce 40
Successor
—
GeForce 60
View Radeon RX 9050 OEM Details View GeForce RTX 5060 GB205 Details