Intel Arc 130T Mobile vs Intel Arc Pro B60 Dual Comparison

Head-to-Head Benchmarks

The database contains no recorded head-to-head benchmark results for the Intel Arc 130T Mobile versus the Intel Arc Pro B60 Dual. Both entries have an average benchmark score of 0 and a percentile rank of 50 among all GPUs in the database, which indicates that neither part has accumulated measurable performance data in the current record set.

Without direct comparative scores, the raw compute specifications provide the only basis for differentiating performance. The Arc Pro B60 Dual delivers an FP32 throughput of 12.29 TFLOPS, which is 3.1 times the 3.942 TFLOPS of the Arc 130T Mobile. The FP16 figures follow the same ratio: 24.58 TFLOPS versus 7.885 TFLOPS. These numbers show a decisive compute advantage for the Pro card across both precision formats.

Texture and pixel throughput tell a similar story. The Arc Pro B60 Dual reaches 384.0 GTexel/s, while the Arc 130T Mobile manages 123.2 GTexel/s. Pixel fill rates are 192.0 GPixel/s for the Pro card and 61.60 GPixel/s for the mobile part. The Pro card is 3.1 times faster in both metrics, matching the FP32 ratio because the core count scales proportionally with texture units and raster output units.

The Arc Pro B60 Dual has 2560 shading units, 160 texture mapping units, and 80 ROPs. The Arc 130T Mobile has 896 shading units, 56 TMUs, and 28 ROPs. The Pro card's 2.9 times more shading units, 2.9 times more TMUs, and 2.9 times more ROPs align closely with the 3.1 times compute advantage, with the small difference attributable to clock speeds.

Clock behavior differs substantially between the two parts. The Arc 130T Mobile has a base clock of 300 MHz and a boost clock of 2200 MHz, a 1900 MHz operating range. The Arc Pro B60 Dual has a base clock of 2000 MHz and a boost clock of 2400 MHz, a much narrower 400 MHz range. The Pro card's minimum operating frequency is 6.7 times higher than the mobile part's base clock, which matters for sustained workloads where the mobile GPU may drop toward its low base frequency under thermal constraints.

Memory performance shows the widest gap of any specification category. The Arc 130T Mobile uses system shared memory, making its bandwidth system dependent. The Arc Pro B60 Dual uses 24 GB of GDDR6 memory on a 192-bit bus, delivering 456.0 GB/s of dedicated bandwidth. The mobile part's bandwidth cannot be expressed as a fixed number because it varies with the host system's memory configuration, but any shared-memory implementation operating through a system bus will fall far short of a dedicated 456.0 GB/s GDDR6 interface.

The ray tracing comparison follows the same pattern. The Arc Pro B60 Dual includes 20 RT cores, while the Arc 130T Mobile includes 7 RT cores. The Pro card provides 2.9 times the ray tracing hardware, consistent with its overall shading unit advantage.

FAQ

Q: Which GPU has higher FP32 compute performance?

A: The Intel Arc Pro B60 Dual delivers 12.29 TFLOPS of FP32 throughput, which is 3.1 times the 3.942 TFLOPS of the Intel Arc 130T Mobile.

Q: How much memory does each GPU have?

A: The Intel Arc Pro B60 Dual has 24 GB of GDDR6 memory on a 192-bit bus. The Intel Arc 130T Mobile has no dedicated memory; it uses system shared memory with system dependent bandwidth.

Q: What are the power requirements for each card?

A: The Intel Arc Pro B60 Dual has a TDP of 400 W and requires an 800 W suggested power supply, using a single 16-pin power connector. The Intel Arc 130T Mobile has a TDP of 35 W and is an integrated GPU with no external power connectors.

Q: Do both GPUs support the same graphics APIs?

A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: What process node are these GPUs built on?

A: Both are fabricated by TSMC on a 5 nm process node. The Arc Pro B60 Dual has 19,600 million transistors on a 272 mm² die, while the transistor count and die size for the Arc 130T Mobile are listed as unknown.

Q: What is the physical size difference between the two cards?

A: The Intel Arc Pro B60 Dual is a dual-slot card measuring 300 mm in length, 110 mm in height, and 40 mm in width. The Intel Arc 130T Mobile is an integrated graphics processor with no physical card dimensions, occupying the IGP form factor.

Where Each One Wins

The Intel Arc Pro B60 Dual wins in every measurable performance category. Its FP32 throughput of 12.29 TFLOPS places it far ahead of the Arc 130T Mobile's 3.942 TFLOPS. The memory subsystem gives it a decisive edge: 24 GB of dedicated GDDR6 with 456.0 GB/s bandwidth versus a system shared configuration with bandwidth that depends entirely on the host platform. For rendering workloads, the Pro card's 384.0 GTexel/s texture rate and 192.0 GPixel/s pixel rate are both 3.1 times higher than the mobile part's 123.2 GTexel/s and 61.60 GPixel/s. The 20 RT cores versus 7 RT cores gives the Pro card a clear advantage in ray-traced content. The Pro card also sustains a 2000 MHz base clock, ensuring consistent performance under load, whereas the mobile part drops to 300 MHz at its base state.

The Intel Arc 130T Mobile wins in power efficiency and physical integration. Its 35 W TDP is a fraction of the Pro card's 400 W TDP, allowing it to operate within a laptop or compact system without external power delivery. The IGP form factor means no slot width, no power connectors, and no separate card dimensions, making it suitable for systems where a discrete GPU cannot fit. The Pro card requires a dual-slot chassis, a 16-pin connector, and an 800 W power supply. For mobile or space-constrained deployments, the Arc 130T Mobile is the only viable option despite its lower compute ceiling.

The release timeline also differs. The Arc 130T Mobile launched on January 12, 2025, approximately eight months before the Arc Pro B60 Dual's September 4, 2025 release. The mobile part has a predecessor in HD Graphics-M, while the Pro card has no recorded predecessor in the database.

Specification Differences

| Specification | Intel Arc 130T Mobile | Intel Arc Pro B60 Dual |

|---|---|---|

| Chip | Arrow Lake-H | BMG-G21 |

| Architecture | Xe-LPG+ | Xe2-HPG |

| Generation | Arc Graphics-M (Arrow Lake) | Battlemage (Pro Series) |

| Transistors | unknown | 19,600 million |

| Die Size | unknown | 272 mm² |

| Transistor Density | null | 72.1M / mm² |

| Base Clock | 300 MHz | 2000 MHz |

| Boost Clock | 2200 MHz | 2400 MHz |

| Memory Size | System Shared | 24 GB |

| Memory Type | System Shared | GDDR6 |

| Memory Bus Width | System Shared | 192 bit |

| Memory Bandwidth | System Dependent | 456.0 GB/s |

| Memory Clock | System Shared | 2375 MHz 19 Gbps effective |

| Shading Units | 896 | 2560 |

| TMUs | 56 | 160 |

| ROPs | 28 | 80 |

| RT Cores | 7 | 20 |

| Pixel Rate | 61.60 GPixel/s | 192.0 GPixel/s |

| Texture Rate | 123.2 GTexel/s | 384.0 GTexel/s |

| FP32 | 3.942 TFLOPS | 12.29 TFLOPS |

| FP16 | 7.885 TFLOPS (2:1) | 24.58 TFLOPS (2:1) |

| TDP | 35 W | 400 W |

| Slot Width | IGP | Dual-slot |

| Power Connectors | null | 1x 16-pin |

| Suggested PSU | null | 800 W |

| Bus Interface | IGP | PCIe 5.0 x8 |

| Display Outputs | Portable Device Dependent | 4x mini-DisplayPort 2.1 |

| Length | null | 300 mm 11.8 inches |

| Height | null | 110 mm 4.3 inches |

| Width | null | 40 mm 1.6 inches |

| Release Date | 2025-01-12 | 2025-09-04 |

| Predecessor | HD Graphics-M | null |

| Launch MSRP | null | 1,199 USD |

Both GPUs share the same manufacturer (Intel), process node (5 nm TSMC), foundry (TSMC), API support (DirectX 12 Ultimate 12_2, OpenGL 4.6, Vulkan 1.4), production status (Active), and average benchmark score (0).

Architecture Differences

The two GPUs belong to different architectural families. The Intel Arc 130T Mobile uses the Xe-LPG+ architecture and is part of the Arc Graphics-M generation built on the Arrow Lake-H chip. The Intel Arc Pro B60 Dual uses the Xe2-HPG architecture and belongs to the Battlemage Pro Series generation built on the BMG-G21 chip. The "Pro Series" designation indicates a workflow-oriented variant of the Battlemage architecture.

The compute core counts scale in proportion across both designs. The Arc Pro B60 Dual has 2560 shading units, 160 TMUs, 80 ROPs, and 20 RT cores. The Arc 130T Mobile has 896 shading units, 56 TMUs, 28 ROPs, and 7 RT cores. Each ratio is approximately 2.9:1 in favor of the Pro card, indicating a similar internal organization per compute unit, just with more units on the larger die.

The physical implementation differs dramatically. The Arc Pro B60 Dual is a discrete GPU with 19,600 million transistors on a 272 mm² die, yielding a transistor density of 72.1M per mm². The Arc 130T Mobile's transistor count and die size are listed as unknown in the database, reflecting its integration into the Arrow Lake-H processor package. The mobile part has no independent memory bus, no dedicated VRAM, and no discrete PCIe interface; it operates as an integrated GPU with system shared memory.

Clock architecture differs in a way that reflects their intended operating environments. The Arc 130T Mobile spans 300 MHz to 2200 MHz, a wide range that allows deep power saving at idle and high throughput when boost is available. The Arc Pro B60 Dual spans 2000 MHz to 2400 MHz, a narrow range that keeps the GPU near its peak frequency during sustained operation. The Pro card's higher minimum clock makes it more predictable for professional workloads that require consistent rendering times.

Memory architecture is the most fundamental difference. The Arc 130T Mobile relies on system shared memory with bandwidth that is system dependent, meaning its effective performance varies with the host laptop's memory configuration. The Arc Pro B60 Dual uses 24 GB of GDDR6 on a 192-bit bus at 2375 MHz with 19 Gbps effective data rate, producing 456.0 GB/s of fixed bandwidth. This dedicated memory subsystem also powers the Pro card's display output configuration: 4x mini-DisplayPort 2.1 connectors, whereas the mobile part's display outputs are portable device dependent.

Power delivery separates the two designs completely. The Arc 130T Mobile consumes 35 W and requires no external power connector, consistent with integrated graphics. The Arc Pro B60 Dual consumes 400 W, requires a single 16-pin power connector, and needs an 800 W suggested power supply. The Pro card is a dual-slot design measuring 300 mm by 110 mm by 40 mm, while the mobile part is an IGP with no physical card dimensions. The bus interface also differs: PCIe 5.0 x8 for the Pro card versus IGP for the mobile part.

The release cadence places the mobile part first. The Arc 130T Mobile launched on January 12, 2025, with HD Graphics-M as its predecessor. The Arc Pro B60 Dual launched on September 4, 2025, with no predecessor listed. The Pro card carries a launch MSRP of 1,199 USD.