AMD Radeon RX 7400 OEM vs Intel Arc Pro B60 Dual Comparison
AMD Radeon RX 7400 OEM
Arc Pro B60 Dual
Analysis: AMD Radeon RX 7400 OEM vs Intel Arc Pro B60 Dual
Head-to-Head Benchmarks
The recorded data contains no direct head-to-head benchmark scores for the AMD Radeon RX 7400 OEM versus the Intel Arc Pro B60 Dual. Both entries have empty benchmark arrays, zero average benchmark scores, and identical percentile rankings at 50 against all GPUs in the database. Without measured application, gaming, or compute results, a numerical performance comparison cannot be derived from the recorded measurements. The specification sheets, however, reveal substantial differences in raw compute capacity, memory throughput, and power delivery that would shape any future benchmark matchup.
The Intel Arc Pro B60 Dual delivers 12.29 TFLOPS of FP32 compute, which is 55.9% higher than the AMD Radeon RX 7400 OEM's 7.885 TFLOPS. This places the Intel part at a clear mathematical advantage in raw shader throughput. The AMD card counters with 28 ray tracing cores against Intel's 20, though the architectural implementation of those cores differs fundamentally. The pixel rate tells a similar story: Intel's 192.0 GPixel/s versus AMD's 70.40 GPixel/s, a 172.7% gap in favor of the Arc Pro B60 Dual. Texture rate follows the same trajectory, with Intel at 384.0 GTexel/s and AMD at 123.2 GTexel/s, a 211.7% difference.
Memory bandwidth amplifies the separation. The Intel card uses a 192-bit bus with 24 GB of GDDR6 memory delivering 456.0 GB/s, while the AMD card uses a 128-bit bus with 8 GB of GDDR6 memory delivering 172.8 GB/s. That is a 163.9% bandwidth advantage for Intel, a margin that would heavily influence resolution scaling, texture streaming, and compute workloads with large working sets. The AMD card does hold one clock-speed anomaly: its base clock sits at 330 MHz with a boost of 1100 MHz, while the Intel card runs a base of 2000 MHz and a boost of 2400 MHz. The AMD figures are unusually low for a modern discrete GPU, suggesting aggressive power management or a specifically tuned OEM profile.
The FP16 comparison adds nuance. AMD achieves 7.885 TFLOPS in FP16 with a 1:1 ratio, meaning no rate advantage over FP32. Intel achieves 24.58 TFLOPS in FP16 with a 2:1 ratio, doubling its FP32 throughput. For workloads that leverage FP16 math, the Intel card extends its lead to 211.7% over AMD. The data shows no benchmark wins for either side, but the specification deltas establish a hierarchy that would likely persist across most measured workloads.
FAQ
Q: Which card has the higher FP32 compute throughput?
A: The Intel Arc Pro B60 Dual delivers 12.29 TFLOPS, which is 55.9% higher than the AMD Radeon RX 7400 OEM's 7.885 TFLOPS.
Q: How does memory capacity and bandwidth compare?
A: The Intel card offers 24 GB of GDDR6 on a 192-bit bus with 456.0 GB/s bandwidth. The AMD card offers 8 GB of GDDR6 on a 128-bit bus with 172.8 GB/s bandwidth.
Q: What are the power requirements for each card?
A: The AMD Radeon RX 7400 OEM has a 55 W TDP with a 250 W suggested PSU and a single 6-pin connector. The Intel Arc Pro B60 Dual has a 400 W TDP with an 800 W suggested PSU and a single 16-pin connector.
Q: Which card has more ray tracing cores?
A: The AMD Radeon RX 7400 OEM has 28 ray tracing cores, while the Intel Arc Pro B60 Dual has 20 ray tracing cores. The architectural efficiency of those cores is not quantified in the recorded data.
Q: Do both cards support the same API feature levels?
A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Q: What is the physical size difference?
A: The AMD card is 167 mm (6.6 inches) long and single-slot. The Intel card is 300 mm (11.8 inches) long, 110 mm (4.3 inches) tall, 40 mm (1.6 inches) wide, and dual-slot.
Architecture Differences
The two GPUs come from fundamentally different design lineages. AMD uses the Navi 33 chip built on RDNA 3.0 architecture, codenamed Hotpink Bonefish, part of the Navi III (RX 7000) generation. Intel uses the BMG-G21 chip built on Xe2-HPG architecture, part of the Battlemage (Pro Series) generation. The process nodes differ: AMD uses TSMC's 6 nm process, while Intel uses TSMC's 5 nm process. Transistor counts reflect the size disparity: AMD packs 13,300 million transistors on a 204 mm² die, yielding a density of 65.2M transistors per mm². Intel packs 19,600 million transistors on a 272 mm² die, yielding 72.1M transistors per mm². The Intel die is 33.3% larger in area and holds 47.4% more transistors.
Shader organization differs significantly. AMD configures 1792 shading units, 112 texture mapping units, and 64 raster operation units. Intel configures 2560 shading units, 160 TMUs, and 80 ROPs. These counts scale with the compute throughput figures, giving Intel advantages of 42.9% in shading units, 42.9% in TMUs, and 25.0% in ROPs. Ray tracing core counts run counter to this trend, with AMD holding 28 against Intel's 20, a 40.0% advantage in core count, though the recorded data does not specify how each architecture translates those cores into traversal or intersection performance.
Memory architecture diverges substantially. AMD uses 8 GB of GDDR6 on a 128-bit bus with 10.8 Gbps effective memory speed. Intel uses 24 GB of GDDR6 on a 192-bit bus with 19 Gbps effective memory speed. The interface also differs: AMD uses PCIe 4.0 x8, while Intel uses PCIe 5.0 x8. Display outputs are another differentiator: AMD provides one HDMI 2.1a port and three DisplayPort 2.1 connectors, while Intel provides four mini-DisplayPort 2.1 connectors. Clock behavior is notably divergent, with AMD's base clock at 330 MHz and boost at 1100 MHz, versus Intel's base of 2000 MHz and boost of 2400 MHz.
Power and physical design reflect the performance gap. AMD's TDP is 55 W with a single 6-pin power connector and a 250 W suggested PSU. Intel's TDP is 400 W with a single 16-pin connector and an 800 W suggested PSU. The AMD card occupies a single slot and measures 167 mm in length, while the Intel card occupies two slots and measures 300 mm in length. Release timing places AMD on 2025-08-07 and Intel on 2025-09-04, nearly a month apart. AMD lists its predecessor as Navi II and successor as Navi IV, while Intel lists neither predecessor nor successor in the database. Intel's production status is Active; AMD's production status is not recorded.
The Verdict
The recorded data supports a clear separation by workload class. The Intel Arc Pro B60 Dual holds decisive advantages in FP32 throughput, FP16 throughput, memory capacity, memory bandwidth, pixel rate, texture rate, and shading resource counts. It also uses a more advanced 5 nm process, supports PCIe 5.0, and carries an Active production status. The AMD Radeon RX 7400 OEM counters with a dramatically lower 55 W TDP, a single-slot footprint, a shorter 167 mm length, a 250 W suggested PSU, more ray tracing cores at 28 versus 20, and a 1:1 FP16 ratio that some workloads may prefer for consistency. The Intel card's 400 W TDP and 800 W suggested PSU place it in a different system integration class entirely.
Neither card has recorded benchmark scores or nearest rivals in the database, so percentile rankings sit equal at 50. The data indicates that any system builder choosing between these parts is selecting between an ultra-low-power compact OEM solution and a high-throughput professional workstation card. The AMD card suits environments where power draw, slot width, and physical length are constrained. The Intel card suits environments where compute throughput, memory capacity, and bandwidth take priority. The 24 GB memory allocation on Intel is particularly notable for large datasets, while AMD's 8 GB allocation aligns with a more conventional mainstream profile.
Specification Differences
The two cards differ across nearly every recorded specification field. Process node: AMD at 6 nm, Intel at 5 nm. Transistors: AMD at 13,300 million, Intel at 19,600 million. Die size: AMD at 204 mm², Intel at 272 mm². Transistor density: AMD at 65.2M / mm², Intel at 72.1M / mm². Base clock: AMD at 330 MHz, Intel at 2000 MHz. Boost clock: AMD at 1100 MHz, Intel at 2400 MHz. Memory speed: AMD at 1350 MHz (10.8 Gbps effective), Intel at 2375 MHz (19 Gbps effective). Memory size: AMD at 8 GB, Intel at 24 GB. Memory type is GDDR6 for both, but bus width differs: 128 bit versus 192 bit. Bandwidth: AMD at 172.8 GB/s, Intel at 456.0 GB/s.
Shading units: AMD at 1792, Intel at 2560. TMUs: AMD at 112, Intel at 160. ROPs: AMD at 64, Intel at 80. Ray tracing cores: AMD at 28, Intel at 20. Pixel rate: AMD at 70.40 GPixel/s, Intel at 192.0 GPixel/s. Texture rate: AMD at 123.2 GTexel/s, Intel at 384.0 GTexel/s. FP32: AMD at 7.885 TFLOPS, Intel at 12.29 TFLOPS. FP16: AMD at 7.885 TFLOPS (1:1), Intel at 24.58 TFLOPS (2:1). TDP: AMD at 55 W, Intel at 400 W. Slot width: single-slot versus dual-slot. Power connectors: 1x 6-pin versus 1x 16-pin. Suggested PSU: 250 W versus 800 W. Bus interface: PCIe 4.0 x8 versus PCIe 5.0 x8. Display outputs: 1x HDMI 2.1a plus 3x DisplayPort 2.1 versus 4x mini-DisplayPort 2.1. Dimensions: AMD at 167 mm length, Intel at 300 mm length, 110 mm height, 40 mm width. Release date: 2025-08-07 versus 2025-09-04. Launch MSRP for the Intel card is 1,199 USD; the AMD card has no recorded launch MSRP.
Identical fields include DirectX 12 Ultimate (12_2), OpenGL 4.6, Vulkan 1.4, GDDR6 memory type, and TSMC as the foundry.
Where Each One Wins
The AMD Radeon RX 7400 OEM wins in scenarios governed by power efficiency and physical footprint. Its 55 W TDP is 86.3% lower than Intel's 400 W, and its 250 W suggested PSU enables installation in systems with modest power delivery. The single-slot design and 167 mm length fit compact chassis that cannot accommodate a 300 mm dual-slot card. The 28 ray tracing cores exceed Intel's 20, giving AMD a count advantage for ray-traced workloads, though efficiency per core is not measured. The 1:1 FP16 ratio means no precision penalty when switching between FP16 and FP32 paths. The 1x HDMI 2.1a output may suit display configurations that require a native HDMI connection without adapters.
The Intel Arc Pro B60 Dual wins in scenarios demanding maximum throughput and capacity. Its 12.29 TFLOPS FP32 and 24.58 TFLOPS FP16 represent the highest raw compute in this comparison. The 24 GB memory pool is three times larger than AMD's 8 GB, and the 456.0 GB/s bandwidth is 163.9% higher. PCIe 5.0 x8 doubles the per-lane transfer rate relative to PCIe 4.0 x8, benefiting data movement. The 192.0 GPixel/s pixel rate and 384.0 GTexel/s texture rate support high-resolution rendering and heavy texture filtering. Four mini-DisplayPort 2.1 outputs allow multi-display professional setups. The Active production status provides supply certainty, and the 5 nm process node enables the higher transistor density of 72.1M / mm². The 400 W TDP and 800 W PSU requirement define its integration class: workstations and high-end desktops with robust power infrastructure. The data shows Intel winning every throughput-oriented metric, while AMD wins every power and form-factor-oriented metric.