AMD Radeon RX 7400 OEM vs NVIDIA GeForce RTX 5090 D V2 Comparison
AMD Radeon RX 7400 OEM
GeForce RTX 5090 D V2
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 7400 OEM vs NVIDIA GeForce RTX 5090 D V2
The Verdict
The recorded database positions these two GPUs at opposite ends of the performance spectrum. The AMD Radeon RX 7400 OEM sits at the 50th percentile among all GPUs in the database, with no benchmark scores recorded and no nearest rivals listed. The NVIDIA GeForce RTX 5090 D V2 sits at the 59th percentile, with a single 3DMark Steel Nomad DX12 score of 16,504 points. That score places it within 0.9% of the AMD Radeon RX 5700 XT (16,361 points), 0.6% behind the NVIDIA RTX PRO 6000 Blackwell (16,408 points), 0.5% behind the AMD Radeon PRO W7500 (16,415 points), and effectively tied with the NVIDIA T400 (16,508 points, 0% delta). The data shows the RTX 5090 D V2 is a mid-pack performer in this specific test, not a class leader. The RX 7400 OEM has no recorded benchmark data, so its performance position cannot be quantified from the database. For users selecting between these two, the RTX 5090 D V2 offers measurable, recorded performance data, while the RX 7400 OEM offers none. The RTX 5090 D V2 also carries a launch MSRP of 2,299 USD, which the database records once. The RX 7400 OEM has no launch MSRP field. Based strictly on available data, the RTX 5090 D V2 is the only one of the two with verified performance results.
Where Each One Wins
The RTX 5090 D V2 wins in every category where the database records a specification. Its FP32 compute of 104.8 TFLOPS dwarfs the RX 7400 OEM's 7.885 TFLOPS. Its FP16 throughput is likewise 104.8 TFLOPS versus 7.885 TFLOPS. Memory bandwidth favors the RTX 5090 D V2 at 1.34 TB/s versus 172.8 GB/s. Pixel rate is 423.6 GPixel/s versus 70.40 GPixel/s. Texture rate is 1,636.8 GTexel/s versus 123.2 GTexel/s. The RTX 5090 D V2 has 21760 shading units, 680 TMUs, 176 ROPs, 170 RT cores, and 680 tensor cores. The RX 7400 OEM has 1792 shading units, 112 TMUs, 64 ROPs, and 28 RT cores, with no tensor cores listed. The RTX 5090 D V2 has 24 GB of GDDR7 memory on a 384-bit bus, while the RX 7400 OEM has 8 GB of GDDR6 on a 128-bit bus.
The RX 7400 OEM wins in power efficiency, at least on paper. Its TDP is 55 W against 575 W for the RTX 5090 D V2. The RX 7400 OEM requires a suggested PSU of 250 W, while the RTX 5090 D V2 requires 950 W. The RX 7400 OEM is a single-slot card at 167 mm length, while the RTX 5090 D V2 is a dual-slot card at 304 mm length, 137 mm height, and 48 mm width. The RX 7400 OEM uses a single 6-pin power connector; the RTX 5090 D V2 uses a single 16-pin connector. The RX 7400 OEM also has a smaller die at 204 mm² versus 750 mm², and fewer transistors at 13,300 million versus 92,200 million.
In the recorded 3DMark Steel Nomad DX12 benchmark, the RTX 5090 D V2 scores 16,504 points. That score is effectively tied with the NVIDIA T400 (16,508), and slightly ahead of the AMD Radeon PRO W7500 (16,415, +0.5% for the RTX), the NVIDIA RTX PRO 6000 Blackwell (16,408, +0.6%), and the AMD Radeon RX 5700 XT (16,361, +0.9%). The RX 7400 OEM has no recorded benchmark score, so no wins can be attributed to it in any test.
Architecture Differences
The RX 7400 OEM uses the Navi 33 chip built on RDNA 3.0 architecture, codenamed Hotpink Bonefish. It is part of the Navi III generation within the RX 7000 series. The process node is 6 nm at TSMC, with 13,300 million transistors on a 204 mm² die, giving a transistor density of 65.2 million per mm². The RTX 5090 D V2 uses the GB202 chip built on Blackwell 2.0 architecture, part of the GeForce 50-series. The process node is 5 nm at TSMC, with 92,200 million transistors on a 750 mm² die, giving a transistor density of 122.9 million per mm².
Clock behavior differs substantially. The RX 7400 OEM has a base clock of 330 MHz and a boost clock of 1100 MHz, with memory clock at 1350 MHz (10.8 Gbps effective). The RTX 5090 D V2 has a base clock of 2017 MHz and a boost clock of 2407 MHz, with memory clock at 1750 MHz (28 Gbps effective). The RX 7400 OEM does not list a game clock; neither does the RTX 5090 D V2.
Memory architecture is a major divide. The RX 7400 OEM uses 8 GB of GDDR6 on a 128-bit bus with 172.8 GB/s bandwidth. The RTX 5090 D V2 uses 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth. The RTX 5090 D V2 has tensor cores (680 of them), which the RX 7400 OEM does not list at all. RT core counts also differ: 170 for the RTX 5090 D V2 versus 28 for the RX 7400 OEM.
Bus interface differs: the RX 7400 OEM uses PCIe 4.0 x8, while the RTX 5090 D V2 uses PCIe 5.0 x16. Display outputs are similar in count but differ in version: the RX 7400 OEM has 1x HDMI 2.1a and 3x DisplayPort 2.1, while the RTX 5090 D V2 has 1x HDMI 2.1b and 3x DisplayPort 2.1b. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Physical dimensions diverge. The RX 7400 OEM is 167 mm long, single-slot, with a 55 W TDP and one 6-pin connector. The RTX 5090 D V2 is 304 mm long, 137 mm tall, 48 mm wide, dual-slot, with a 575 W TDP and one 16-pin connector. The production status for the RTX 5090 D V2 is Active; the RX 7400 OEM has no production status listed. Release dates are one week apart: the RX 7400 OEM released on 2025-08-07, and the RTX 5090 D V2 released on 2025-08-14. The RX 7400 OEM's predecessor is Navi II and successor is Navi IV; the RTX 5090 D V2's predecessor is GeForce 40 and successor is GeForce 60.
FAQ
Q: Which GPU has more recorded benchmark data?
A: The RTX 5090 D V2 has one recorded benchmark result: 16,504 points in 3DMark Steel Nomad DX12. The RX 7400 OEM has no recorded benchmark scores in the database.
Q: How does the RTX 5090 D V2 compare to its nearest rivals in the Steel Nomad test?
A: It is effectively tied with the NVIDIA T400 (16,508, 0% delta), ahead of the AMD Radeon PRO W7500 (16,415, +0.5%), ahead of the NVIDIA RTX PRO 6000 Blackwell (16,408, +0.6%), and ahead of the AMD Radeon RX 5700 XT (16,361, +0.9%).
Q: What memory configurations do the two cards use?
A: The RX 7400 OEM uses 8 GB of GDDR6 on a 128-bit bus with 172.8 GB/s bandwidth. The RTX 5090 D V2 uses 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth.
Q: What are the TDP requirements for each card?
A: The RX 7400 OEM has a TDP of 55 W with a suggested PSU of 250 W. The RTX 5090 D V2 has a TDP of 575 W with a suggested PSU of 950 W.
Q: Do both cards support the same APIs?
A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Display outputs differ in version: the RX 7400 OEM has HDMI 2.1a and DisplayPort 2.1, while the RTX 5090 D V2 has HDMI 2.1b and DisplayPort 2.1b.
Q: What is the transistor count difference?
A: The RX 7400 OEM has 13,300 million transistors on a 204 mm² die. The RTX 5090 D V2 has 92,200 million transistors on a 750 mm² die.
Head-to-Head Benchmarks
No head-to-head benchmark results exist in the database for these two GPUs. The winsA and winsB fields are both zero. The RX 7400 OEM has no benchmarks array entries, and the RTX 5090 D V2 has exactly one benchmark entry. Therefore, the only quantitative comparison possible is the RTX 5090 D V2's single score against its nearest rivals, not against the RX 7400 OEM.
The RTX 5090 D V2's 3DMark Steel Nomad DX12 score of 16,504 points places it in the 59th percentile of all GPUs in the database. Its nearest rival, the NVIDIA T400, scores 16,508 points with a 0% delta, meaning the two are statistically indistinguishable in this test. The AMD Radeon PRO W7500 trails by 0.5% at 16,415 points. The NVIDIA RTX PRO 6000 Blackwell trails by 0.6% at 16,408 points. The AMD Radeon RX 5700 XT trails by 0.9% at 16,361 points. These deltas are all under 1%, indicating that the RTX 5090 D V2 performs within a narrow band of these four cards in the Steel Nomad workload.
The RX 7400 OEM, with no recorded benchmark scores, cannot be positioned against the RTX 5090 D V2 or any other GPU in the database. Its percentile rank of 50 places it at the median of all GPUs, but without any score, that rank is not tied to a specific performance level. The RTX 5090 D V2's percentile rank of 59 is based on its 16,504-point score. The database thus provides a clear quantitative result for the RTX 5090 D V2 and none for the RX 7400 OEM. Any performance comparison between the two would require additional data that the database does not contain.