AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5070 Comparison

AMD
RADEON

AMD Radeon RX 9050 OEM

CORE STATE Navi 44
VRAM 4 GB
CLOCK SPEED 2600 MHz
TDP 92 W
BUS WIDTH 64 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5070

CORE STATE GB205
VRAM 12 GB
CLOCK SPEED 2512 MHz
TDP 250 W
BUS WIDTH 192 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
5,077
geekbench_opencl
N/A
172,660
geekbench_vulkan
N/A
178,923
passmark_directx_10
N/A
180
passmark_directx_11
N/A
277
passmark_directx_12
N/A
108
passmark_directx_9
N/A
320
passmark_g2d
N/A
1,305
passmark_g3d
N/A
29,137
passmark_gpu_compute
N/A
15,787

Analysis: AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 5070

Where Each One Wins

The recorded data splits these two GPUs into completely different performance classes. The NVIDIA GeForce RTX 5070 wins every single benchmark category in the database, holding a decisive advantage across synthetic DirectX, OpenCL, Vulkan, and compute workloads. The AMD Radeon RX 9050 OEM has no recorded benchmark scores of its own, which places it at the 50th percentile among all GPUs, while the RTX 5070 sits at the 82nd percentile with an average benchmark score of 40377.

The practical use-case split is therefore straightforward. The RTX 5070 is the only one of the two that can be evaluated for gaming and general compute performance from recorded measurements. Its 3DMark Steel Nomad DX12 score of 5077, Geekbench OpenCL score of 172660, and Geekbench Vulkan score of 178923 all indicate a card built for demanding 3D rendering and GPU-accelerated tasks. The RX 9050 OEM, with no benchmark entries, cannot claim a single performance win in any workload category.

For builders who prioritize raw throughput, the RTX 5070 delivers 30.87 TFLOPS FP32 and 30.87 TFLOPS FP16, which is roughly three times the FP32 figure of the RX 9050 OEM at 10.65 TFLOPS. The RX 9050 OEM does win on power efficiency in terms of specifications: its 92 W TDP versus the RTX 5070's 250 W TDP means the AMD card draws substantially less power while still offering RDNA 4.0 features such as 16 ray accelerators and PCIe 5.0 connectivity. That makes the RX 9050 OEM a plausible candidate for low-power or compact systems where absolute performance is secondary to thermal and power constraints.

The RTX 5070 also holds the advantage in memory capacity and bandwidth. Its 12 GB of GDDR7 on a 192-bit bus delivers 672.0 GB/s, compared to the RX 9050 OEM's 4 GB of GDDR6 on a 64-bit bus at 144.0 GB/s. For texture-heavy workloads, the RTX 5070's 482.3 GTexel/s versus 166.4 GTexel/s further confirms where the performance gap lies.

FAQ

Q: Which GPU has the higher average benchmark score?

A: The RTX 5070 has an average benchmark score of 40377, while the RX 9050 OEM has no recorded benchmark scores and sits at the 50th percentile. The RTX 5070 is at the 82nd percentile among all GPUs.

Q: How do the memory specifications compare?

A: The RTX 5070 uses 12 GB of GDDR7 on a 192-bit bus with 672.0 GB/s bandwidth. The RX 9050 OEM uses 4 GB of GDDR6 on a 64-bit bus with 144.0 GB/s bandwidth.

Q: What are the power requirements for each card?

A: The RX 9050 OEM has a 92 W TDP and requires a 250 W suggested PSU with a single 8-pin connector. The RTX 5070 has a 250 W TDP and requires a 600 W suggested PSU with a single 16-pin connector.

Q: Do both cards support the same graphics APIs?

A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: Which card has more shading units?

A: The RTX 5070 has 6144 shading units, 192 texture mapping units, 80 raster operation units, 48 ray tracing cores, and 192 tensor cores. The RX 9050 OEM has 1024 shading units, 64 texture mapping units, 64 raster operation units, and 16 ray accelerators.

Q: What is the release date difference?

A: The RTX 5070 was released on March 3, 2025, while the RX 9050 OEM has a release date of July 27, 2026.

Head-to-Head Benchmarks

The head-to-head benchmark table in the database contains no entries, so there are no direct comparison scores between these two cards. However, the RTX 5070's individual benchmark results provide a clear picture of its performance level. The 3DMark Steel Nomad DX12 score of 5077 is the most representative gaming metric available. The Geekbench Vulkan score of 178923 and OpenCL score of 172660 show strong compute performance across both major GPU compute APIs.

The PassMark suite offers further granularity. The RTX 5070 scores 29137 in PassMark G3D, 15787 in GPU compute, 1305 in G2D, 320 in DirectX 9, 277 in DirectX 11, 180 in DirectX 10, and 108 in DirectX 12. The DirectX 12 score of 108 is notably lower than the DirectX 9 and 11 scores, which suggests that the PassMark DirectX 12 test may not be fully representative of the card's capabilities, especially given its strong 3DMark Steel Nomad result. The GPU compute score of 15787 alongside the G3D score of 29137 indicates balanced performance between rasterization and compute duties.

The RX 9050 OEM has no corresponding benchmark entries, so it cannot be compared directly on any of these tests. The database lists zero wins for each side in the head-to-head section, which reflects the absence of paired test data rather than a tie in performance. The RTX 5070's nearest rivals in the database are all AMD professional cards: the AMD Radeon Pro 580 with an average score of 40318 (0.1% delta), the AMD Radeon Pro WX 7100 at 40063 (0.8% delta), the AMD Radeon Pro 5300 at 40870 (-1.2% delta), and the NVIDIA RTX A500 Mobile at 39568 (2% delta). These deltas are all within 2% of the RTX 5070's average score, meaning the RTX 5070 performs essentially on par with those professional workstation cards.

Specification Differences

The two cards differ across nearly every core specification. The RTX 5070 has 6144 shading units versus 1024 on the RX 9050 OEM, a 6x difference. Texture mapping units are 192 versus 64, and raster operation units are 80 versus 64. The RTX 5070 has 48 ray tracing cores and 192 tensor cores, while the RX 9050 OEM has 16 ray accelerators and no tensor core field.

Clock speeds show a different pattern. The RX 9050 OEM has a base clock of 1330 MHz, a boost clock of 2600 MHz, and a game clock of 1920 MHz. The RTX 5070 has a higher base clock at 2325 MHz but a lower boost clock at 2512 MHz. The memory clocks differ as well: the RX 9050 OEM runs at 2250 MHz (18 Gbps effective), while the RTX 5070 runs at 1750 MHz (28 Gbps effective).

Pixel and texture rates heavily favor the RTX 5070. It delivers 201.0 GPixel/s and 482.3 GTexel/s, compared to 166.4 GPixel/s and 166.4 GTexel/s for the RX 9050 OEM. The FP32 and FP16 compute figures are both 30.87 TFLOPS on the RTX 5070 versus 10.65 TFLOPS on the RX 9050 OEM.

Physical specifications also differ. The RTX 5070 has recorded dimensions of 245 mm length, 115 mm height, and 40 mm width. The RX 9050 OEM has no recorded dimensions. Both are dual-slot cards. Power delivery differs: the RX 9050 OEM uses a single 8-pin connector with a 250 W suggested PSU, while the RTX 5070 uses a single 16-pin connector with a 600 W suggested PSU. Display outputs are similar, with the RX 9050 OEM offering 1x HDMI 2.1b and 2x DisplayPort 2.1a, and the RTX 5070 offering 1x HDMI 2.1b and 3x DisplayPort 2.1b. The RTX 5070 has a launch MSRP of 549 USD.

Architecture Differences

The RTX 5070 uses the GB205 chip built on NVIDIA's Blackwell 2.0 architecture, fabricated on TSMC's 5 nm process. It contains 31,100 million transistors on a 263 mm² die, giving a transistor density of 118.3M per mm². The RX 9050 OEM uses the Navi 44 chip on AMD's RDNA 4.0 architecture, fabricated on TSMC's 4 nm process. It contains 29,700 million transistors on a 199 mm² die, giving a transistor density of 149.2M per mm². The RX 9050 OEM therefore achieves higher transistor density on a smaller die despite having fewer total transistors.

The RTX 5070 belongs to the GeForce 50 generation with the Blackwell 2.0 architecture, succeeding the GeForce 40 series and preceding the GeForce 60 series. The RX 9050 OEM belongs to the Radeon RX 9000 series and the Navi IV (RX 9000) generation, succeeding the Navi III generation. The RX 9050 OEM has no successor listed.

The architectural feature sets diverge significantly. The RTX 5070 includes 192 tensor cores, which the RX 9050 OEM does not list at all. The RTX 5070 has 48 ray tracing cores versus 16 ray accelerators on the RX 9050 OEM. Both support the same API set: DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Both use PCIe 5.0 x16 as the bus interface.

Memory architecture is another major divergence. The RTX 5070 uses GDDR7 with a 192-bit bus, while the RX 9050 OEM uses GDDR6 with a 64-bit bus. The 672.0 GB/s bandwidth on the RTX 5070 is 4.7 times the 144.0 GB/s on the RX 9050 OEM. The RTX 5070's 12 GB capacity is three times the RX 9050 OEM's 4 GB. The 4 nm process on the RX 9050 OEM is denser than the 5 nm process on the RTX 5070, but the larger die and higher transistor count on the RTX 5070 enable its substantially higher compute throughput.

The Verdict

The data supports only one conclusion for performance: the RTX 5070 is in a different class entirely. With an average benchmark score of 40377 versus no recorded scores for the RX 9050 OEM, the RTX 5070 dominates every measurable workload. Its 30.87 TFLOPS FP32 compute is roughly three times the RX 9050 OEM's 10.65 TFLOPS. Its 672.0 GB/s memory bandwidth is nearly five times the RX 9050 OEM's 144.0 GB/s. Its 12 GB memory capacity is three times the RX 9050 OEM's 4 GB. The RTX 5070 also carries 48 ray tracing cores and 192 tensor cores, features that the RX 9050 OEM either lacks or offers in reduced form.

The RX 9050 OEM does have one clear advantage in the specifications: power consumption. Its 92 W TDP and 250 W suggested PSU make it suitable for systems where the RTX 5070's 250 W TDP and 600 W suggested PSU would be impractical. The RX 9050 OEM also uses the denser 4 nm process and achieves a higher transistor density of 149.2M per mm² versus 118.3M per mm² on the RTX 5070, but this does not translate into competitive performance.

Builders seeking gaming or compute performance should select the RTX 5070 based on the benchmark data. Builders constrained by power delivery or physical space, where the RX 9050 OEM's lower TDP and unspecified dimensions may fit better, could consider the AMD card, but they must accept a large performance deficit. The RTX 5070's percentile ranking at 82 versus the RX 9050 OEM's 50 further confirms the gap. The RTX 5070's nearest rivals are all professional AMD workstation cards within 2% of its average score, which places it in a performance tier that the RX 9050 OEM does not approach based on any recorded measurement.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9050 OEM
RTX 5070
Core Specs
Shading Units
1,024
6,144 +500.0%
Shaders
1,024
6,144 +500.0%
TMUs
64
192 +200.0%
ROPs
64
80 +25.0%
Compute Units
16
—
SM Count
—
48
Clocks
Base Clock
1330 MHz
2325 MHz
Boost Clock
2600 MHz
2512 MHz
Game Clock
1920 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
12 GB
VRAM (MB)
4,096
12,288 +200.0%
Memory Type
GDDR6
GDDR7
Memory Bus
64 bit
192 bit
Bandwidth
144.0 GB/s
672.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
2 MB
48 MB
L3 Cache
16 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
166.4 GPixel/s
201.0 GPixel/s
Texture Rate
166.4 GTexel/s
482.3 GTexel/s
FP32 (TFLOPS)
10.65 TFLOPS
30.87 TFLOPS
FP64 (TFLOPS)
332.8 GFLOPS (1:32)
482.3 GFLOPS (1:64)
FP16 (TFLOPS)
10.65 TFLOPS (1:1)
30.87 TFLOPS (1:1)
AI/RT
RT Cores
16
48 +200.0%
Tensor Cores
—
192
Matrix Cores
32
—
Power
TDP
92 W
250 W
TDP (W)
92
250 +171.7%
Suggested PSU
250 W
600 W
Power Connectors
1x 8-pin
1x 16-pin
Architecture
Architecture
RDNA 4.0
Blackwell 2.0
GPU Name
Navi 44
GB205
Generation
Navi IV (RX 9000)
GeForce 50
Process Size
4 nm
5 nm
Transistors
29,700 million
31,100 million
Die Size
199 mm²
263 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
118.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
Dual-slot
Dual-slot
Length
—
245 mm 9.6 inches
Height
—
115 mm 4.5 inches
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x16
Other
Launch Price
—
549 USD
Production
Active
Active
Predecessor
Navi III
GeForce 40
Successor
—
GeForce 60
View Radeon RX 9050 OEM Details View GeForce RTX 5070 Details