AMD Radeon PRO W7400 vs NVIDIA GeForce RTX 5090 D V2 Comparison
AMD Radeon PRO W7400
GeForce RTX 5090 D V2
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon PRO W7400 vs NVIDIA GeForce RTX 5090 D V2
The Verdict
The recorded data positions these two GPUs at opposite ends of the performance spectrum. The AMD Radeon PRO W7400 is a low-power professional card with a 50th percentile ranking among all GPUs, while the NVIDIA GeForce RTX 5090 D V2 sits at the 59th percentile with a benchmark score of 16,504 in 3DMark Steel Nomad DX12. The RTX 5090 D V2 is the clear choice for any workload requiring maximum compute throughput, raw rasterization, or ray tracing. The W7400, with its 55 W TDP and single-slot design, is suited for environments where power delivery and physical footprint are the primary constraints. The data shows no direct head-to-head benchmark results, so all comparisons derive from the specifications and the single recorded score for the NVIDIA card.
The RTX 5090 D V2 delivers 104.8 TFLOPS of FP32 performance versus 7.885 TFLOPS for the W7400, a 13.3x difference. Its nearest rivals in the database include the NVIDIA T400, AMD Radeon PRO W7500, and NVIDIA RTX PRO 6000 Blackwell, all within 0.9% of its score. This suggests the RTX 5090 D V2 is not an outlier in its segment; it performs in line with other high-end workstation cards. The W7400 has no recorded benchmark scores or rivals, meaning its performance position is entirely inferred from its specifications and percentile rank.
Architecture Differences
The two GPUs come from different architectural generations and process nodes. The AMD Radeon PRO W7400 uses the Navi 33 chip with RDNA 3.0 architecture, codenamed Hotpink Bonefish, built on a 6 nm process at TSMC. The NVIDIA GeForce RTX 5090 D V2 uses the GB202 chip with Blackwell 2.0 architecture, also fabricated by TSMC but on a 5 nm node. The transistor counts differ dramatically: 13,300 million for AMD versus 92,200 million for NVIDIA. Die sizes are 204 mm² and 750 mm² respectively, giving transistor densities of 65.2M per mm² for AMD and 122.9M per mm² for NVIDIA.
The NVIDIA card includes 680 tensor cores, a feature entirely absent from the AMD specification list. Both cards support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The RTX 5090 D V2 uses GDDR7 memory while the W7400 uses GDDR6. The AMD card has 28 ray tracing cores, while the NVIDIA card has 170 RT cores. The bus interfaces also differ: PCIe 4.0 x8 for AMD versus PCIe 5.0 x16 for NVIDIA. Display outputs vary as well, with the W7400 offering four DisplayPort 2.1 outputs, while the RTX 5090 D V2 offers one HDMI 2.1b and three DisplayPort 2.1b outputs.
Where Each One Wins
The AMD Radeon PRO W7400 wins in power efficiency and physical design. Its 55 W TDP requires no power connectors and only a 250 W suggested PSU, whereas the RTX 5090 D V2 demands a 575 W TDP, a 16-pin connector, and a 950 W suggested PSU. The W7400 is single-slot at 168 mm length, 69 mm height, and 20 mm width. The RTX 5090 D V2 is dual-slot, measuring 304 mm by 137 mm by 48 mm. For multi-GPU configurations or small form factor chassis, the W7400 is the only viable option from the data.
The NVIDIA GeForce RTX 5090 D V2 wins decisively in compute and memory performance. It offers 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth, versus 8 GB of GDDR6 on a 128-bit bus with 172.8 GB/s for the AMD card. The NVIDIA card has 21,760 shading units, 680 TMUs, and 176 ROPs, compared to 1,792 shading units, 112 TMUs, and 64 ROPs for AMD. Pixel rate is 423.6 GPixel/s versus 70.40 GPixel/s, and texture rate is 1,636.8 GTexel/s versus 123.2 GTexel/s. The FP16 performance mirrors FP32 at a 1:1 ratio for both, but the absolute numbers favor NVIDIA by the same 13.3x margin.
FAQ
Q: Which GPU has a higher benchmark score in the database?
A: Only the NVIDIA GeForce RTX 5090 D V2 has a recorded benchmark score: 16,504 in 3DMark Steel Nomad DX12. The AMD Radeon PRO W7400 has no recorded benchmark scores.
Q: How much memory does each GPU provide?
A: The AMD Radeon PRO W7400 provides 8 GB of GDDR6 on a 128-bit bus. The NVIDIA GeForce RTX 5090 D V2 provides 24 GB of GDDR7 on a 384-bit bus.
Q: What are the power requirements for each card?
A: The W7400 has a 55 W TDP, no power connectors, and a 250 W suggested PSU. The RTX 5090 D V2 has a 575 W TDP, one 16-pin connector, and a 950 W suggested PSU.
Q: Which card supports tensor cores?
A: Only the NVIDIA GeForce RTX 5090 D V2 lists tensor cores, with 680 of them. The AMD Radeon PRO W7400 specification does not include tensor cores.
Q: What process nodes are used for each GPU?
A: The AMD Radeon PRO W7400 uses a 6 nm process. The NVIDIA GeForce RTX 5090 D V2 uses a 5 nm process. Both are fabricated by TSMC.
Q: How do the physical dimensions compare?
A: The W7400 is 168 mm long, 69 mm high, and 20 mm wide, fitting a single slot. The RTX 5090 D V2 is 304 mm long, 137 mm high, and 48 mm wide, requiring two slots.
Head-to-Head Benchmarks
The database contains no direct head-to-head benchmark results between these two GPUs, with zero wins recorded for either side. The only available performance data point is the RTX 5090 D V2's score of 16,504 in 3DMark Steel Nomad DX12. That score places it at the 59th percentile among all GPUs. Its nearest rivals in the database are the NVIDIA T400 with an average score of 16,508 and a 0% delta, the AMD Radeon PRO W7500 at 16,415 with a 0.5% delta, the NVIDIA RTX PRO 6000 Blackwell at 16,408 with a 0.6% delta, and the AMD Radeon RX 5700 XT at 16,361 with a 0.9% delta. These results indicate the RTX 5090 D V2 performs essentially identically to the T400 in this test, despite having vastly different specifications. The W7400 has no comparable data, so its relative performance cannot be quantified from the database.
The specification gap between the two cards is enormous. The RTX 5090 D V2 delivers 104.8 TFLOPS of FP32 compute, while the W7400 delivers 7.885 TFLOPS. That is a 96.9 TFLOPS difference in favor of NVIDIA. Memory bandwidth shows a similar pattern: 1.34 TB/s versus 172.8 GB/s, an 8.2x difference. The pixel rate of 423.6 GPixel/s versus 70.40 GPixel/s represents a 6x gap. Texture rate is 1,636.8 GTexel/s versus 123.2 GTexel/s, a 13.3x difference that mirrors the FP32 ratio.
Specification Differences
The two cards differ in nearly every measurable specification. The AMD Radeon PRO W7400 has a base clock of 330 MHz and a boost clock of 1100 MHz, while the NVIDIA GeForce RTX 5090 D V2 has a base clock of 2017 MHz and a boost clock of 2407 MHz. Memory clocks are 1350 MHz with 10.8 Gbps effective for AMD versus 1750 MHz with 28 Gbps effective for NVIDIA. The AMD card has 1,792 shading units, 112 TMUs, and 64 ROPs. The NVIDIA card has 21,760 shading units, 680 TMUs, and 176 ROPs. Ray tracing cores number 28 for AMD and 170 for NVIDIA. Tensor cores are present only on NVIDIA at 680.
The process node differs from 6 nm to 5 nm. Transistor count jumps from 13,300 million to 92,200 million. Die size expands from 204 mm² to 750 mm². Transistor density increases from 65.2M per mm² to 122.9M per mm². The bus interface changes from PCIe 4.0 x8 to PCIe 5.0 x16. The power envelope goes from 55 W to 575 W, with the suggested PSU rising from 250 W to 950 W. The slot width changes from single-slot to dual-slot. The power connector goes from none to one 16-pin. Display outputs shift from four DisplayPort 2.1 to one HDMI 2.1b plus three DisplayPort 2.1b.
Release dates differ by twelve days: the W7400 released on 2025-08-02 and the RTX 5090 D V2 on 2025-08-14. The AMD card's predecessor is the Radeon Pro Vega, while the NVIDIA card's predecessor is the GeForce 40 series and its successor is the GeForce 60 series. The RTX 5090 D V2 has a launch MSRP of 2,299 USD. The W7400 has no recorded launch MSRP. Both cards remain in active production. The NVIDIA card belongs to the GeForce 50-series and the GeForce 50 generation, while the AMD card belongs to the Radeon Pro Navi generation under the Navi III Series.