NVIDIA GB10 vs Lisuan Tech LX ULTRA Comparison

The Verdict

The database comparison between the NVIDIA GB10 and the Lisuan Tech LX ULTRA is defined by a fundamental asymmetry in measured data. The NVIDIA GB10 has two recorded benchmark scores, an average score of 117,393, and a percentile rank of 95 among all GPUs. The Lisuan Tech LX ULTRA has no recorded benchmark scores, an average score of 0, and a percentile rank of 50. This means the GB10 is a known quantity with verified performance data, while the LX ULTRA is essentially an unmeasured product in the database.

For workloads that rely on the GB10’s documented capabilities, such as OpenCL and Vulkan compute tasks, the data shows it is a top-tier performer. Its nearest rival, the AMD Radeon PRO W7700, holds an average score of 118,976, which is 1.3% higher. The NVIDIA RTX 4000 SFF Ada Generation sits at 117,088, just 0.3% behind the GB10. The GB10 also leads the NVIDIA Tesla V100 SXM2 16 GB by 2.6% and the NVIDIA RTX A5500 Mobile by 3%. These margins are narrow, indicating the GB10 competes directly with professional workstation-class GPUs.

The Lisuan Tech LX ULTRA offers no benchmark results, no nearest rivals, and no average score. Its percentile rank of 50 suggests it falls in the middle of the database distribution, but without actual scores, any performance claim is unsupported. The GB10 is the only product in this comparison with evidence of performance, and therefore the data supports choosing it for any task where measured compute output is required.

Architecture Differences

The two products diverge sharply in their underlying designs. The NVIDIA GB10 uses the GB20B chip built on the Blackwell 2.0 architecture, part of the Server Blackwell (Bxx) generation. It is fabricated on a 5 nm process at TSMC with a die size of 382 mm². The Lisuan Tech LX ULTRA uses the 7G105 chip based on the TrueGPU architecture, belonging to the 7G100 generation. It is manufactured on a 6 nm process, also at TSMC, but its die size is not recorded in the database.

Memory configurations differ substantially. The GB10 packs 128 GB of LPDDR5X memory across a 256-bit bus, delivering 273.2 GB/s of bandwidth. The LX ULTRA has 24 GB of GDDR6 memory on a 192-bit bus, but achieves 432.0 GB/s of bandwidth, which is significantly higher despite the smaller capacity and narrower bus. The GB10 memory clock is listed at 1067 MHz with 8.5 Gbps effective, while the LX ULTRA memory runs at 2250 MHz with 18 Gbps effective.

Core configurations show both similarities and differences. Both products have 6144 shading units. The GB10 has 384 texture mapping units and 48 raster operation pipelines, along with 48 ray tracing cores and 384 tensor cores. The LX ULTRA has 192 texture mapping units and 96 raster operation pipelines, with no recorded ray tracing or tensor core counts. The GB10 delivers a pixel rate of 116.1 GPixel/s and a texture rate of 928.5 GTexel/s. The LX ULTRA produces a higher pixel rate of 192.0 GPixel/s but a lower texture rate of 384.0 GTexel/s.

Compute throughput also diverges. The GB10 reaches 29.71 TFLOPS for FP32 and the same 29.71 TFLOPS for FP16, indicating a 1:1 ratio. The LX ULTRA reaches 24.58 TFLOPS for FP32 but 49.15 TFLOPS for FP16, reflecting a 2:1 ratio. This means the LX ULTRA has a clear advantage in half-precision workloads, while the GB10 is stronger in single-precision tasks.

Clock behavior differs as well. The GB10 has a base clock of 1665 MHz and a boost clock of 2418 MHz. The LX ULTRA records no base or boost clock values in the database. Power requirements are distinct: the GB10 has a TDP of 140 W, while the LX ULTRA draws 225 W. The GB10 is an integrated graphics processor with no power connectors and a suggested PSU of 300 W. The LX ULTRA is a dual-slot card with a single 16-pin connector and a suggested PSU of 550 W.

The GB10 uses a PCIe 5.0 x16 interface and has a single HDMI display output. The LX ULTRA uses PCIe 4.0 x16 and provides four DisplayPort 1.4a outputs. In terms of API support, the GB10 lists N/A for DirectX, OpenGL, and Vulkan, while the LX ULTRA supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.3. Physical dimensions also differ: the GB10 measures 150 mm by 51 mm by 150 mm, while the LX ULTRA is larger at 268 mm by 112 mm by 40 mm.

Head-to-Head Benchmarks

The database does not contain any direct head-to-head benchmark entries between the NVIDIA GB10 and the Lisuan Tech LX ULTRA. The head-to-head benchmarks field is empty, and the win counts for both products are zero. This absence of direct comparison data means the only measurable performance signals come from the GB10’s standalone benchmark results.

The GB10 scores 120,137 in Geekbench OpenCL and 114,648 in Geekbench Vulkan. Its average benchmark score of 117,393 places it in the 95th percentile of all GPUs. Against its nearest rivals, the GB10 is 0.3% ahead of the NVIDIA RTX 4000 SFF Ada Generation, which has an average score of 117,088. The GB10 trails the AMD Radeon PRO W7700 by 1.3%, as that card scores 118,976. The GB10 leads the NVIDIA Tesla V100 SXM2 16 GB by 2.6%, with that GPU scoring 114,395, and it leads the NVIDIA RTX A5500 Mobile by 3%, with that product scoring 113,944.

Because the LX ULTRA has no benchmark scores, no nearest rivals, and no average score, the database provides no quantitative comparison point for it. The LX ULTRA’s percentile rank of 50 indicates it is positioned at the median of the database distribution, but this rank is not supported by any recorded performance data. The GB10’s percentile of 95, by contrast, is directly tied to its measured scores. Any analysis of relative performance between the two products must rely solely on architectural specifications from the database, not on benchmark results.

FAQ

Q: Which product has a higher average benchmark score in the database?

A: The NVIDIA GB10 has an average benchmark score of 117,393. The Lisuan Tech LX ULTRA has an average benchmark score of 0, as it has no recorded benchmarks.

Q: What is the memory bandwidth difference between the two products?

A: The Lisuan Tech LX ULTRA provides 432.0 GB/s of bandwidth from its 24 GB GDDR6 memory. The NVIDIA GB10 provides 273.2 GB/s from its 128 GB LPDDR5X memory. The LX ULTRA offers higher bandwidth despite having less capacity.

Q: How do the FP32 and FP16 compute capabilities compare?

A: The NVIDIA GB10 delivers 29.71 TFLOPS for both FP32 and FP16, indicating a 1:1 ratio. The Lisuan Tech LX ULTRA delivers 24.58 TFLOPS for FP32 and 49.15 TFLOPS for FP16, reflecting a 2:1 ratio. The GB10 is stronger in FP32, while the LX ULTRA is stronger in FP16.

Q: What API support does each product list?

A: The NVIDIA GB10 lists N/A for DirectX, OpenGL, and Vulkan. The Lisuan Tech LX ULTRA lists DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.3.

Q: Which product has a higher pixel rate and which has a higher texture rate?

A: The Lisuan Tech LX ULTRA has a higher pixel rate at 192.0 GPixel/s compared to the NVIDIA GB10’s 116.1 GPixel/s. The NVIDIA GB10 has a higher texture rate at 928.5 GTexel/s compared to the LX ULTRA’s 384.0 GTexel/s.

Q: What are the power connector and slot requirements for each product?

A: The NVIDIA GB10 is an integrated graphics processor with no power connectors and a suggested PSU of 300 W. The Lisuan Tech LX ULTRA is a dual-slot card with one 16-pin power connector and a suggested PSU of 550 W.

Where Each One Wins

The NVIDIA GB10 wins in every category where measured data exists. Its average benchmark score of 117,393 and 95th percentile rank place it among the highest-performing GPUs in the database. It outperforms the NVIDIA RTX 4000 SFF Ada Generation by 0.3%, the NVIDIA Tesla V100 SXM2 16 GB by 2.6%, and the NVIDIA RTX A5500 Mobile by 3%. It only trails the AMD Radeon PRO W7700 by 1.3% among its nearest rivals. The GB10 also leads in FP32 compute with 29.71 TFLOPS, texture rate at 928.5 GTexel/s, and memory capacity at 128 GB. Its 6144 shading units match the LX ULTRA, but its 384 texture mapping units double the LX ULTRA’s 192. The GB10 supports PCIe 5.0 x16, while the LX ULTRA uses PCIe 4.0 x16. The GB10 has a lower TDP of 140 W compared to 225 W, making it more power-efficient based on the recorded specifications.

The Lisuan Tech LX ULTRA wins in several architectural categories despite lacking benchmark scores. Its memory bandwidth of 432.0 GB/s exceeds the GB10’s 273.2 GB/s. Its FP16 throughput of 49.15 TFLOPS is nearly double the GB10’s 29.71 TFLOPS. Its pixel rate of 192.0 GPixel/s is higher than the GB10’s 116.1 GPixel/s. The LX ULTRA also has 96 raster operation pipelines versus the GB10’s 48, and it provides four DisplayPort 1.4a outputs compared to the GB10’s single HDMI. The LX ULTRA supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.3, while the GB10 lists no API support. For workloads that require high memory bandwidth, half-precision compute, or extensive display connectivity, the LX ULTRA’s specifications indicate an advantage, but these are unverified by any recorded benchmark results.

The data confirms the GB10 as the only product with demonstrable performance, while the LX ULTRA remains a specification-only entry. Users requiring measured compute performance should rely on the GB10. Users prioritizing FP16 throughput, memory bandwidth, or multi-display output may consider the LX ULTRA, but the database offers no evidence of its real-world performance. The GB10’s 95th percentile rank versus the LX ULTRA’s 50th percentile further emphasizes the gap in validated capability.