NVIDIA B300 SXM6 AC vs NVIDIA GeForce RTX 5070 Ti SUPER Comparison

NVIDIA
GEFORCE

NVIDIA B300 SXM6 AC

CORE STATE GB110
VRAM 288 GB
CLOCK SPEED 2032 MHz
TDP 1100 W
BUS WIDTH 8192 bit
ARCHITECTURE Blackwell Ultra
nm
PROCESS 5 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 5070 Ti SUPER

CORE STATE GB203
VRAM 16 GB
CLOCK SPEED 2452 MHz
TDP 350 W
BUS WIDTH 256 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2026

PERFORMANCE BENCHMARKS

geekbench_opencl
369,831
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
6,269.5

Analysis: NVIDIA B300 SXM6 AC vs NVIDIA GeForce RTX 5070 Ti SUPER

FAQ

Q: What is the performance gap between the NVIDIA B300 SXM6 AC and the NVIDIA GeForce RTX 5070 Ti SUPER?

A: The B300 SXM6 AC scores 369,831 in Geekbench OpenCL, while the RTX 5070 Ti SUPER scores 6,270 in 3DMark Steel Nomad DX12. These are different benchmarks, so direct comparison is not possible, but the B300's average benchmark score of 369,831 places it in the 100th percentile of all GPUs, whereas the RTX 5070 Ti SUPER sits at the 36th percentile with an average score of 6,270.

Q: Which GPU has more memory and bandwidth?

A: The B300 SXM6 AC has 288 GB of HBM3e memory with an 8192-bit bus and 8.19 TB/s bandwidth. The RTX 5070 Ti SUPER has 16 GB of GDDR7 memory on a 256-bit bus with 896.0 GB/s bandwidth. The B300's memory capacity is 18 times larger, and its bandwidth is over 9 times higher.

Q: What are the architectural differences between these two GPUs?

A: The B300 SXM6 AC uses the GB110 chip with Blackwell Ultra architecture, while the RTX 5070 Ti SUPER uses the GB203 chip with Blackwell 2.0 architecture. Both are built on a 5 nm process at TSMC, but the B300 has 208,000 million transistors on a 1628 mm² die, while the RTX 5070 Ti SUPER has 45,600 million transistors on a 378 mm² die.

Q: Which GPU has higher clock speeds?

A: The RTX 5070 Ti SUPER runs at a base clock of 2295 MHz and a boost clock of 2452 MHz. The B300 SXM6 AC has a lower base clock of 1665 MHz and a boost clock of 2032 MHz. The RTX 5070 Ti SUPER's boost clock is 420 MHz higher.

Q: What is the power consumption difference?

A: The B300 SXM6 AC has a TDP of 1100 W and requires a 1500 W suggested PSU. The RTX 5070 Ti SUPER has a TDP of 350 W and uses a single 16-pin power connector. The B300 consumes over 3 times the power of the RTX 5070 Ti SUPER.

Q: What are the display output capabilities?

A: The B300 SXM6 AC has no display outputs, as it is a server module. The RTX 5070 Ti SUPER provides 1x HDMI 2.1b and 3x DisplayPort 2.1b outputs, supporting DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.

Architecture Differences

The NVIDIA B300 SXM6 AC and NVIDIA GeForce RTX 5070 Ti SUPER represent two divergent branches of NVIDIA's Blackwell generation. The B300 uses the GB110 chip under the Blackwell Ultra architecture, belonging to the Server Blackwell (Bxx) generation. The RTX 5070 Ti SUPER uses the GB203 chip with Blackwell 2.0 architecture, part of the GeForce 50 series. Both are fabricated on a 5 nm process at TSMC, indicating a shared manufacturing foundation despite their different market positions.

The transistor counts reveal the scale difference. The B300 integrates 208,000 million transistors across a 1628 mm² die, yielding a transistor density of 127.8M per mm². The RTX 5070 Ti SUPER contains 45,600 million transistors on a 378 mm² die, with a density of 120.6M per mm². The B300's die is over 4 times larger and carries more than 4.5 times the transistor count, though its density advantage over the smaller chip is modest at roughly 6 percent.

The memory subsystems diverge sharply. The B300 uses HBM3e memory with 288 GB capacity, an 8192-bit bus, and 8.19 TB/s bandwidth. The RTX 5070 Ti SUPER uses GDDR7 with 16 GB capacity, a 256-bit bus, and 896.0 GB/s bandwidth. The B300's memory bus width is 32 times wider, and its bandwidth advantage is approximately 9.1 times. This reflects the B300's server-oriented design for massive data movement, while the RTX 5070 Ti SUPER targets consumer workloads with more conventional memory architecture.

The compute configurations differ substantially. The B300 packs 18,944 shading units, 592 TMUs, and 24 ROPs, with 592 tensor cores. The RTX 5070 Ti SUPER has 8,960 shading units, 280 TMUs, and 96 ROPs, with 280 tensor cores and 70 RT cores. The B300 has 2.1 times the shading units and 2.1 times the tensor cores, but the RTX 5070 Ti SUPER has 4 times the ROPs. The B300 does not list RT core counts, reflecting its non-consumer focus, while the RTX 5070 Ti SUPER includes dedicated ray tracing hardware.

The B300 achieves 76.99 TFLOPS in both FP32 and FP16 (1:1 ratio). The RTX 5070 Ti SUPER delivers 43.94 TFLOPS in both FP32 and FP16 (1:1 ratio). The B300's FP32 throughput is 75 percent higher. Pixel rates tell a different story: the RTX 5070 Ti SUPER reaches 235.4 GPixel/s versus the B300's 48.77 GPixel/s, a 4.8 times advantage for the consumer card. Texture rates favor the B300 at 1,202.9 GTexel/s versus 686.6 GTexel/s, a 75 percent lead.

The B300 operates as an SXM Module with PCIe 6.0 x16 interface, while the RTX 5070 Ti SUPER is a dual-slot card with PCIe 5.0 x16. The B300 has no display outputs and no API support for DirectX, OpenGL, or Vulkan. The RTX 5070 Ti SUPER supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, with 1x HDMI 2.1b and 3x DisplayPort 2.1b outputs. The B300's TDP is 1100 W with a 1500 W suggested PSU, while the RTX 5070 Ti SUPER draws 350 W from a single 16-pin connector.

The Verdict

The data indicates these GPUs serve entirely different purposes. The NVIDIA B300 SXM6 AC is a server accelerator with no display outputs, designed for compute workloads where massive memory capacity and bandwidth are critical. Its 288 GB HBM3e memory, 8.19 TB/s bandwidth, and 76.99 TFLOPS FP32 performance position it for data center tasks. Its 100th percentile ranking among all GPUs in the database, with an average benchmark score of 369,831, confirms its top-tier compute status.

The NVIDIA GeForce RTX 5070 Ti SUPER is a consumer graphics card with full display output support and modern graphics APIs. Its 16 GB GDDR7 memory, 896.0 GB/s bandwidth, and 43.94 TFLOPS FP32 performance suit gaming and workstation graphics. Its 36th percentile ranking and average score of 6,270 in 3DMark Steel Nomad DX12 reflect its position in the consumer GPU hierarchy.

Users requiring a server module for large-scale compute, particularly workloads that need enormous memory pools, should select the B300 SXM6 AC. The B300's nearest rival, the NVIDIA B200, scores 345,482, which is 7 percent lower, while the H200 NVL scores 334,891 (10.4 percent lower), and the AMD Instinct MI300X scores 317,994 (16.3 percent lower). The B300 leads these accelerators by margins ranging from 7 to 25 percent.

Users needing a consumer graphics card for gaming or professional visualization should choose the RTX 5070 Ti SUPER. Its nearest rival, the NVIDIA GeForce RTX 4070 Ti SUPER AD102, scores 6,270 (0 percent delta), showing parity. The AMD FirePro W600 scores 6,223 (0.8 percent higher), while the Quadro K620 scores 6,282 (0.2 percent lower) and the Radeon R7 M350 scores 6,327 (0.9 percent lower). The RTX 5070 Ti SUPER sits in a tightly clustered performance band among its peers.

Specification Differences

The recorded data shows these specifications differ between the two GPUs:

  • Chip: GB110 (B300) vs GB203 (RTX 5070 Ti SUPER)
  • Architecture: Blackwell Ultra (B300) vs Blackwell 2.0 (RTX 5070 Ti SUPER)
  • Generation: Server Blackwell (Bxx) (B300) vs GeForce 50 (RTX 5070 Ti SUPER)
  • Transistors: 208,000 million (B300) vs 45,600 million (RTX 5070 Ti SUPER)
  • Die Size: 1628 mm² (B300) vs 378 mm² (RTX 5070 Ti SUPER)
  • Transistor Density: 127.8M / mm² (B300) vs 120.6M / mm² (RTX 5070 Ti SUPER)
  • Base Clock: 1665 MHz (B300) vs 2295 MHz (RTX 5070 Ti SUPER)
  • Boost Clock: 2032 MHz (B300) vs 2452 MHz (RTX 5070 Ti SUPER)
  • Memory Clock: 2000 MHz 8 Gbps effective (B300) vs 1750 MHz 28 Gbps effective (RTX 5070 Ti SUPER)
  • Memory Size: 288 GB (B300) vs 16 GB (RTX 5070 Ti SUPER)
  • Memory Type: HBM3e (B300) vs GDDR7 (RTX 5070 Ti SUPER)
  • Memory Bus Width: 8192 bit (B300) vs 256 bit (RTX 5070 Ti SUPER)
  • Memory Bandwidth: 8.19 TB/s (B300) vs 896.0 GB/s (RTX 5070 Ti SUPER)
  • Shading Units: 18,944 (B300) vs 8,960 (RTX 5070 Ti SUPER)
  • TMUs: 592 (B300) vs 280 (RTX 5070 Ti SUPER)
  • ROPs: 24 (B300) vs 96 (RTX 5070 Ti SUPER)
  • RT Cores: Not listed (B300) vs 70 (RTX 5070 Ti SUPER)
  • Tensor Cores: 592 (B300) vs 280 (RTX 5070 Ti SUPER)
  • Pixel Rate: 48.77 GPixel/s (B300) vs 235.4 GPixel/s (RTX 5070 Ti SUPER)
  • Texture Rate: 1,202.9 GTexel/s (B300) vs 686.6 GTexel/s (RTX 5070 Ti SUPER)
  • FP32: 76.99 TFLOPS (B300) vs 43.94 TFLOPS (RTX 5070 Ti SUPER)
  • FP16: 76.99 TFLOPS (B300) vs 43.94 TFLOPS (RTX 5070 Ti SUPER)
  • TDP: 1100 W (B300) vs 350 W (RTX 5070 Ti SUPER)
  • Slot Width: SXM Module (B300) vs Dual-slot (RTX 5070 Ti SUPER)
  • Power Connectors: Not listed (B300) vs 1x 16-pin (RTX 5070 Ti SUPER)
  • Suggested PSU: 1500 W (B300) vs Not listed (RTX 5070 Ti SUPER)
  • Bus Interface: PCIe 6.0 x16 (B300) vs PCIe 5.0 x16 (RTX 5070 Ti SUPER)
  • Display Outputs: No outputs (B300) vs 1x HDMI 2.1b 3x DisplayPort 2.1b (RTX 5070 Ti SUPER)
  • DirectX: N/A (B300) vs 12 Ultimate (12_2) (RTX 5070 Ti SUPER)
  • OpenGL: N/A (B300) vs 4.6 (RTX 5070 Ti SUPER)
  • Vulkan: N/A (B300) vs 1.4 (RTX 5070 Ti SUPER)
  • Dimensions: Not listed (B300) vs 304 mm x 137 mm x 48 mm (RTX 5070 Ti SUPER)
  • Release Date: 2025-09-10 (B300) vs 2025-12-31 (RTX 5070 Ti SUPER)
  • Launch MSRP: Not listed (B300) vs 749 USD (RTX 5070 Ti SUPER)

Head-to-Head Benchmarks

The head-to-head benchmark data contains no direct comparison entries, as the two GPUs were tested with different benchmark suites. The B300 SXM6 AC was evaluated with Geekbench OpenCL, recording a score of 369,831. The RTX 5070 Ti SUPER was evaluated with 3DMark Steel Nomad DX12, recording a score of 6,269.5.

The B300's average benchmark score of 369,831 places it in the 100th percentile of all GPUs in the database. Its nearest rivals include the NVIDIA B200 with an average score of 345,482 (7 percent lower), the NVIDIA H200 NVL at 334,891 (10.4 percent lower), the AMD Instinct MI300X at 317,994 (16.3 percent lower), and the NVIDIA L40S at 295,763 (25 percent lower). The B300 leads its closest competitor, the B200, by 7 percent, and extends that lead to 25 percent over the L40S.

The RTX 5070 Ti SUPER's average benchmark score of 6,270 places it in the 36th percentile. Its nearest rivals form a tight cluster: the NVIDIA GeForce RTX 4070 Ti SUPER AD102 scores 6,270 (0 percent delta), the NVIDIA Quadro K620 scores 6,282 (0.2 percent lower), the AMD FirePro W600 scores 6,223 (0.8 percent higher), and the AMD Radeon R7 M350 scores 6,327 (0.9 percent lower). The RTX 5070 Ti SUPER effectively matches its closest rival, the RTX 4070 Ti SUPER AD102, with no measurable performance difference.

The absence of shared benchmark tests means the database does not record a direct head-to-head comparison between the B300 and the RTX 5070 Ti SUPER. The wins count stands at 0 for each GPU in this pairing. The benchmark results instead show each GPU's standing within its own competitive segment, with the B300 dominating the server accelerator field and the RTX 5070 Ti SUPER performing at parity with its consumer counterparts.

Where Each One Wins

The B300 SXM6 AC wins in compute throughput and memory capacity. Its FP32 performance of 76.99 TFLOPS exceeds the RTX 5070 Ti SUPER's 43.94 TFLOPS by 75 percent. Its 288 GB memory capacity is 18 times larger, and its 8.19 TB/s bandwidth is over 9 times higher. The B300 also holds a 2.1 times advantage in shading units, TMUs, and tensor cores. Its 1,202.9 GTexel/s texture rate surpasses the RTX 5070 Ti SUPER's 686.6 GTexel/s by 75 percent.

The B300 wins in the server accelerator segment. Its 100th percentile ranking and 369,831 average benchmark score place it ahead of all recorded rivals. The data shows it outperforms the B200 by 7 percent, the H200 NVL by 10.4 percent, the MI300X by 16.3 percent, and the L40S by 25 percent. Workloads requiring massive memory pools, such as large-scale model training or inference, benefit from the B300's 288 GB HBM3e configuration.

The RTX 5070 Ti SUPER wins in pixel throughput and graphics features. Its 235.4 GPixel/s pixel rate is 4.8 times higher than the B300's 48.77 GPixel/s. It includes 96 ROPs versus the B300's 24, a 4 times advantage. The RTX 5070 Ti SUPER provides 70 RT cores for ray tracing, while the B300 lists no RT core count. Graphics API support is exclusive to the RTX 5070 Ti SUPER, with DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 available, while the B300 has no API support.

The RTX 5070 Ti SUPER wins on clock speeds. Its base clock of 2295 MHz and boost clock of 2452 MHz exceed the B300's 1665 MHz base and 2032 MHz boost. The 420 MHz boost clock advantage contributes to the consumer card's higher pixel rate. The RTX 5070 Ti SUPER also provides display outputs with 1x HDMI 2.1b and 3x DisplayPort 2.1b, enabling direct display connection, while the B300 has no outputs.

The RTX 5070 Ti SUPER operates within the consumer GPU segment at the 36th percentile. Its performance parity with the RTX 4070 Ti SUPER AD102 (0 percent delta) and near-parity with the Quadro K620 (0.2 percent lower), FirePro W600 (0.8 percent higher), and R7 M350 (0.9 percent lower) indicates a balanced position among its peers. Gaming, content creation, and workstation graphics workloads that require display output and modern graphics APIs fall to the RTX 5070 Ti SUPER.

DETAILED SPECIFICATIONS

SPECIFICATION
B300 SXM6 AC
RTX 5070 Ti SUPER
Core Specs
Shading Units
18,944
8,960 -52.7%
Shaders
18,944
8,960 -52.7%
TMUs
592
280 -52.7%
ROPs
24
96 +300.0%
SM Count
148
—
Clocks
Base Clock
1665 MHz
2295 MHz
Boost Clock
2032 MHz
2452 MHz
Memory Clock
2000 MHz 8 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
288 GB
16 GB
VRAM (MB)
294,912
16,384 -94.4%
Memory Type
HBM3e
GDDR7
Memory Bus
8192 bit
256 bit
Bandwidth
8.19 TB/s
896.0 GB/s
Cache
L1 Cache
256 KB (per SM)
128 KB (per SM)
L2 Cache
126 MB
48 MB
Performance
Pixel Rate
48.77 GPixel/s
235.4 GPixel/s
Texture Rate
1,202.9 GTexel/s
686.6 GTexel/s
FP32 (TFLOPS)
76.99 TFLOPS
43.94 TFLOPS
FP64 (TFLOPS)
1,202.9 GFLOPS (1:64)
686.6 GFLOPS (1:64)
FP16 (TFLOPS)
76.99 TFLOPS (1:1)
43.94 TFLOPS (1:1)
AI/RT
RT Cores
—
70
Tensor Cores
592
280 -52.7%
Power
TDP
1100 W
350 W
TDP (W)
1,100
350 -68.2%
Suggested PSU
1500 W
—
Power Connectors
—
1x 16-pin
Architecture
Architecture
Blackwell Ultra
Blackwell 2.0
GPU Name
GB110
GB203
Generation
Server Blackwell (Bxx)
GeForce 50
Process Size
5 nm
5 nm
Transistors
208,000 million
45,600 million
Die Size
1628 mm²
378 mm²
Foundry
TSMC
TSMC
Density
127.8M / mm²
120.6M / mm²
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
10.3
—
Shader Model
—
6.8
Physical
Slot Width
SXM Module
Dual-slot
Length
—
304 mm 12 inches
Height
—
137 mm 5.4 inches
Outputs
No outputs
1x HDMI 2.1b 3x DisplayPort 2.1b
Bus Interface
PCIe 6.0 x16
PCIe 5.0 x16
Other
Launch Price
—
749 USD
Production
Active
Active
Predecessor
Server Hopper
—
Successor
Server Rubin
—
View B300 SXM6 AC Details View GeForce RTX 5070 Ti SUPER Details