AMD Radeon RX 7400 OEM vs NVIDIA B300 SXM6 AC Comparison
AMD Radeon RX 7400 OEM
B300 SXM6 AC
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 7400 OEM vs NVIDIA B300 SXM6 AC
Head-to-Head Benchmarks
The recorded data shows no direct head-to-head benchmark entries between the AMD Radeon RX 7400 OEM and the NVIDIA B300 SXM6 AC. The database lists zero benchmark wins for either side in a direct comparison. This absence of side-by-side tests means conclusions must be drawn from each product’s standalone measurements and the B300’s nearest-rival comparisons.
The AMD Radeon RX 7400 OEM posts an average benchmark score of 0 with a percentile ranking of 50 among all GPUs. It has no recorded benchmark entries and no nearest rivals listed in the database. Its raw compute figures place it firmly in the entry-level segment: 7.885 TFLOPS FP32, 7.885 TFLOPS FP16 (1:1), a pixel rate of 70.40 GPixel/s, and a texture rate of 123.2 GTexel/s.
The NVIDIA B300 SXM6 AC delivers a Geekbench OpenCL score of 369831, placing it in the 100th percentile of all GPUs. Its nearest rivals show the following deltas: the NVIDIA B200 scores 345482 (7% behind), the NVIDIA H200 NVL scores 334891 (10.4% behind), the AMD Instinct MI300X scores 317994 (16.3% behind), and the NVIDIA L40S scores 295763 (25% behind). The B300 leads its closest competitor by 24,349 points and its farthest listed rival by 74,068 points.
The compute gap between the two cards is dramatic. The B300 delivers 76.99 TFLOPS FP32 and 76.99 TFLOPS FP16 (1:1), which is roughly 9.8 times the FP32 throughput of the RX 7400 OEM. Texture rate tells a similar story: 1,202.9 GTexel/s versus 123.2 GTexel/s, a factor of about 9.8. Memory bandwidth diverges even further, with the B300’s 8.19 TB/s versus the RX 7400’s 172.8 GB/s, a ratio of roughly 47 to 1.
The B300 also dominates in shading resources. It packs 18,944 shading units, 592 TMUs, and 592 tensor cores. The RX 7400 has 1,792 shading units, 112 TMUs, and 28 ray tracing cores. The B300 has no listed ray tracing cores, while the RX 7400 does, but the B300’s tensor core count is substantial. The RX 7400’s pixel rate of 70.40 GPixel/s actually exceeds the B300’s 48.77 GPixel/s, a rare metric where the smaller card leads. This reflects the B300’s unusually low ROP count of 24 versus the RX 7400’s 64 ROPs.
Power consumption scales with performance class. The RX 7400 OEM carries a 55 W TDP with a suggested 250 W power supply and a single 6-pin connector. The B300 SXM6 AC has a 1100 W TDP and a suggested 1500 W power supply. The B300 is an SXM module with no display outputs, while the RX 7400 is a single-slot card with 1x HDMI 2.1a and 3x DisplayPort 2.1 outputs.
The Verdict
The data points to two products designed for entirely different workloads. The NVIDIA B300 SXM6 AC is a server accelerator with a Geekbench OpenCL score of 369831, a 100th percentile ranking, and a 7% lead over the NVIDIA B200, its closest listed rival. The AMD Radeon RX 7400 OEM has no recorded benchmark score and sits at the 50th percentile, making it a baseline-level GPU by the database’s measurement.
For compute-heavy tasks such as large-scale AI training, scientific simulation, or high-bandwidth data processing, the B300 is the clear choice. Its 288 GB of HBM3e memory with 8.19 TB/s bandwidth, 76.99 TFLOPS FP32, and 592 tensor cores provide the resources for workloads that the RX 7400 cannot approach. The B300’s 16.3% lead over the AMD Instinct MI300X and 25% lead over the NVIDIA L40S further contextualize its position among server-class accelerators.
The RX 7400 OEM suits display-oriented or low-power desktop use. Its 55 W TDP, single-slot form factor, 8 GB GDDR6 memory, and display outputs make it a functional entry-level card. Its 70.40 GPixel/s pixel rate exceeds the B300’s 48.77 GPixel/s, suggesting it handles rasterization output more efficiently for its class. However, the RX 7400 has no benchmark entries to verify real-world performance.
The B300 is active in production status, released on September 10, 2025, with a successor listed as Server Rubin. The RX 7400 has no production status listed, released on August 7, 2025, with a predecessor of Navi II and successor of Navi IV. The database does not include a launch MSRP for either product, so no cost comparison is possible from the recorded data.
Where Each One Wins
The NVIDIA B300 SXM6 AC wins in every compute-oriented category. Its FP32 throughput of 76.99 TFLOPS is roughly 9.8 times the RX 7400’s 7.885 TFLOPS. Its FP16 output matches its FP32 at 76.99 TFLOPS, whereas the RX 7400 also matches at 7.885 TFLOPS, but the absolute difference remains large. Texture rate favors the B300 at 1,202.9 GTexel/s versus 123.2 GTexel/s.
Memory capacity and bandwidth strongly favor the B300. It carries 288 GB of HBM3e across an 8192-bit bus, delivering 8.19 TB/s. The RX 7400 has 8 GB of GDDR6 on a 128-bit bus, yielding 172.8 GB/s. The B300’s memory bandwidth is approximately 47 times higher, and its capacity is 36 times larger. For workloads that load large datasets into GPU memory, this gap is decisive.
The B300 also leads in transistor count and die size. It uses 208,000 million transistors on a 1628 mm² die with a density of 127.8M / mm². The RX 7400 uses 13,300 million transistors on a 204 mm² die with a density of 65.2M / mm². The B300’s transistor density is roughly double, indicating a more densely packed design on a 5 nm process versus the RX 7400’s 6 nm process, both from TSMC.
The AMD Radeon RX 7400 OEM wins in a few specific metrics. Its pixel rate of 70.40 GPixel/s exceeds the B300’s 48.77 GPixel/s. Its ROP count of 64 is more than double the B300’s 24. Its power draw of 55 W is far lower than the B300’s 1100 W, and its suggested power supply of 250 W compares to the B300’s 1500 W. The RX 7400 also has display outputs and supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the B300 lists N/A for all three APIs and has no display outputs.
The RX 7400’s 167 mm length (6.6 inches) and single-slot design make it physically compact. The B300 is an SXM module with no listed dimensions. The RX 7400 uses PCIe 4.0 x8, while the B300 uses PCIe 6.0 x16, which grants the B300 a newer and wider bus interface.
FAQ
Q: What is the benchmark score difference between the two GPUs?
A: The NVIDIA B300 SXM6 AC scores 369831 in Geekbench OpenCL, while the AMD Radeon RX 7400 OEM has no recorded benchmark score and an average benchmark score of 0.
Q: How does the B300 compare to its nearest rivals in the database?
A: The B300 leads the NVIDIA B200 by 7%, the NVIDIA H200 NVL by 10.4%, the AMD Instinct MI300X by 16.3%, and the NVIDIA L40S by 25% in average benchmark scores.
Q: Which GPU has more memory and bandwidth?
A: The B300 has 288 GB of HBM3e with 8.19 TB/s bandwidth on an 8192-bit bus. The RX 7400 has 8 GB of GDDR6 with 172.8 GB/s bandwidth on a 128-bit bus.
Q: Does the RX 7400 have any performance advantage over the B300?
A: The RX 7400 has a higher pixel rate (70.40 GPixel/s versus 48.77 GPixel/s) and more ROPs (64 versus 24), along with a much lower TDP of 55 W versus 1100 W.
Q: What are the process node differences?
A: The RX 7400 uses a 6 nm TSMC process with a 204 mm² die and 13,300 million transistors. The B300 uses a 5 nm TSMC process with a 1628 mm² die and 208,000 million transistors.
Q: Which GPU supports display outputs?
A: The RX 7400 has 1x HDMI 2.1a and 3x DisplayPort 2.1 outputs. The B300 lists no display outputs and has N/A for DirectX, OpenGL, and Vulkan support.
Architecture Differences
The two GPUs come from different architecture families. The AMD Radeon RX 7400 OEM uses the RDNA 3.0 architecture with the Navi 33 chip and the codename Hotpink Bonefish. It belongs to the Navi III (RX 7000) generation, with a predecessor of Navi II and successor of Navi IV. The NVIDIA B300 SXM6 AC uses the Blackwell Ultra architecture with the GB110 chip and belongs to the Server Blackwell (Bxx) generation, with a predecessor of Server Hopper and successor of Server Rubin.
Process technology differs by one node step. The RX 7400 is fabricated on a 6 nm process at TSMC, while the B300 uses a 5 nm process at the same foundry. Die size varies substantially: the RX 7400 measures 204 mm² versus the B300’s 1628 mm². Transistor counts follow die size, with 13,300 million on the RX 7400 and 208,000 million on the B300. Transistor density also differs, at 65.2M / mm² for the RX 7400 and 127.8M / mm² for the B300.
The compute architectures diverge in resource allocation. The RX 7400 has 1,792 shading units, 112 TMUs, 64 ROPs, and 28 ray tracing cores, with no tensor cores listed. The B300 has 18,944 shading units, 592 TMUs, 24 ROPs, and 592 tensor cores, with no ray tracing cores listed. The RX 7400’s higher ROP count aligns with its higher pixel rate, while the B300’s tensor core count indicates a design focused on matrix operations.
Memory subsystems differ fundamentally. The RX 7400 uses 8 GB of GDDR6 on a 128-bit bus with a memory clock of 1350 MHz (10.8 Gbps effective), yielding 172.8 GB/s. The B300 uses 288 GB of HBM3e on an 8192-bit bus with a memory clock of 2000 MHz (8 Gbps effective), yielding 8.19 TB/s. The B300’s bus width is 64 times wider, and its total bandwidth is roughly 47 times higher.
Clock behavior also contrasts. The RX 7400 has a base clock of 330 MHz and a boost clock of 1100 MHz. The B300 has a base clock of 1665 MHz and a boost clock of 2032 MHz. Despite the RX 7400’s lower clocks, its pixel rate is higher due to its larger ROP count relative to its shading units.
Power delivery and form factor differ by design intent. The RX 7400 is a single-slot card, 167 mm long (6.6 inches), with a 1x 6-pin power connector and a suggested 250 W power supply. The B300 is an SXM module with no power connector listed and a suggested 1500 W power supply. The RX 7400 uses PCIe 4.0 x8, while the B300 uses PCIe 6.0 x16.
API support separates the two as well. The RX 7400 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The B300 lists N/A for all three APIs, reflecting its server-oriented role without a consumer graphics stack. Display output availability follows the same split: the RX 7400 provides 1x HDMI 2.1a and 3x DisplayPort 2.1, while the B300 has no outputs.
Release timing is close, with the RX 7400 released on August 7, 2025, and the B300 released on September 10, 2025. Production status is listed as active for the B300, while the RX 7400 has no production status recorded. The B300’s 100th percentile ranking versus the RX 7400’s 50th percentile ranking in the database summarizes the performance-class divide between these two products.