AMD Radeon RX 6600 LE vs NVIDIA B300 SXM6 AC Comparison

AMD
RADEON

AMD Radeon RX 6600 LE

CORE STATE Navi 23
VRAM 8 GB
CLOCK SPEED 2495 MHz
TDP 132 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 2.0
nm
PROCESS 7 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

B300 SXM6 AC

CORE STATE GB110
VRAM 288 GB
CLOCK SPEED 2032 MHz
TDP 1100 W
BUS WIDTH 8192 bit
ARCHITECTURE Blackwell Ultra
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
69,229
369,831
geekbench_vulkan
72,428
N/A

Analysis: AMD Radeon RX 6600 LE vs NVIDIA B300 SXM6 AC

AMD Radeon RX 6600 LE and NVIDIA B300 SXM6 AC occupy opposite extremes of the GPU spectrum, and the recorded data confirms a decisive performance gap. The B300 SXM6 AC delivers roughly 4.3 times the OpenCL score of the RX 6600 LE, a margin that dwarfs every other comparison in the database. The RX 6600 LE, however, remains a strong performer in its own segment, sitting at the 91st percentile of all GPUs, while the B300 SXM6 AC sits at the absolute top with a perfect 100th percentile ranking.

Head-to-Head Benchmarks

The only direct benchmark comparison available in the database is the Geekbench OpenCL test. In this measurement, the NVIDIA B300 SXM6 AC scores 369,831, while the AMD Radeon RX 6600 LE scores 69,229. The delta is 81.3 percent in favor of the NVIDIA part, meaning the B300 SXM6 AC outperforms the RX 6600 LE by a factor of approximately 5.3. This is not a close contest by any metric, and the magnitude of the gap places these two products in entirely different performance classes.

Looking at the rival landscape for the RX 6600 LE, its average benchmark score of 70,829 places it within a narrow band of competitors. The NVIDIA RTX A3000 Mobile averages 70,140, just 1 percent behind the AMD card. The NVIDIA Quadro P6000 sits 1.2 percent behind at 69,986, and the AMD Radeon Pro WX 8200 trails by 1.4 percent with 69,870. On the other side, the AMD Radeon RX 6650M leads the RX 6600 LE by 1.3 percent with an average score of 71,768. These tight margins indicate that the RX 6600 LE is well-positioned within its immediate competitive set, trading blows with professional mobile and workstation-class GPUs from the previous generation.

For the B300 SXM6 AC, the rival comparison tells a different story. Its average score of 369,831 leads the NVIDIA B200 by 7 percent, the NVIDIA H200 NVL by 10.4 percent, the AMD Instinct MI300X by 16.3 percent, and the NVIDIA L40S by 25 percent. These are substantial advantages even against the most powerful data center accelerators currently measured. The B300 SXM6 AC does not merely win its head-to-head matchup; it establishes a new ceiling that other server-class parts approach but do not reach.

The Geekbench Vulkan score for the RX 6600 LE is 72,428, which is higher than its OpenCL result of 69,229. The database does not include a Vulkan score for the B300 SXM6 AC, likely because its API support is marked as N/A across DirectX, OpenGL, and Vulkan. This absence underscores the fundamental difference in purpose: the RX 6600 LE is built for graphics-facing workloads, while the B300 SXM6 AC is optimized for compute without traditional graphics APIs.

The Verdict

The data supports a clear separation of roles. The NVIDIA B300 SXM6 AC is the dominant compute accelerator, outperforming its nearest rivals by 7 to 25 percent and holding a perfect 100th percentile rank. Its 76.99 TFLOPS of FP32 performance and 8.19 TB/s of memory bandwidth place it far beyond any client GPU in the database. Organizations running large-scale compute workloads would select this part without hesitation based on the recorded figures.

The AMD Radeon RX 6600 LE, with its 91st percentile rank, serves a completely different purpose. It delivers 8.942 TFLOPS of FP32 performance and 224.0 GB/s of bandwidth, figures that suit conventional graphics rendering, gaming, and lighter compute tasks. Its nearest rivals are within 1.4 percent in either direction, meaning the RX 6600 LE is a competitive mid-range option but not a class leader. The choice between these two GPUs is not a matter of preference; it is a matter of workload requirements. The B300 SXM6 AC is for compute density and scale, while the RX 6600 LE is for accessible, graphics-oriented performance.

FAQ

Q: Which GPU has the higher OpenCL benchmark score?

A: The NVIDIA B300 SXM6 AC scores 369,831 in Geekbench OpenCL, compared to 69,229 for the AMD Radeon RX 6600 LE. The NVIDIA part leads by 81.3 percent.

Q: How does the RX 6600 LE compare to its nearest rivals?

A: The RX 6600 LE averages 70,829. It trails the AMD Radeon RX 6650M by 1.3 percent (71,768), but leads the NVIDIA RTX A3000 Mobile by 1 percent (70,140), the NVIDIA Quadro P6000 by 1.2 percent (69,986), and the AMD Radeon Pro WX 8200 by 1.4 percent (69,870).

Q: What is the percentile ranking for each GPU?

A: The B300 SXM6 AC ranks at the 100th percentile of all GPUs in the database. The RX 6600 LE ranks at the 91st percentile.

Q: Which GPU has higher FP32 compute performance?

A: The B300 SXM6 AC delivers 76.99 TFLOPS of FP32 performance, while the RX 6600 LE delivers 8.942 TFLOPS. The NVIDIA part is approximately 8.6 times higher in this metric.

Q: Does the B300 SXM6 AC support traditional graphics APIs?

A: No. The database records DirectX, OpenGL, and Vulkan support as N/A for the B300 SXM6 AC. The RX 6600 LE supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: How does the B300 SXM6 AC compare to the NVIDIA B200?

A: The B300 SXM6 AC averages 369,831, which is 7 percent ahead of the NVIDIA B200's average score of 345,482.

Specification Differences

The two GPUs differ in nearly every measurable specification. The RX 6600 LE uses 8 GB of GDDR6 memory on a 128-bit bus, delivering 224.0 GB/s of bandwidth. The B300 SXM6 AC uses 288 GB of HBM3e memory on an 8192-bit bus, delivering 8.19 TB/s of bandwidth, which is roughly 36.6 times higher.

Shading unit counts diverge sharply: the RX 6600 LE has 1,792 shading units, while the B300 SXM6 AC has 18,944. Texture mapping units stand at 112 versus 592, and render output units at 64 versus 24. The B300 SXM6 AC includes 592 tensor cores, while the RX 6600 LE has none recorded. The RX 6600 LE includes 28 ray tracing cores, while the B300 SXM6 AC has no RT core count listed.

Clock speeds are closer than other metrics. The RX 6600 LE has a base clock of 1626 MHz and a boost clock of 2495 MHz, while the B300 SXM6 AC has a base clock of 1665 MHz and a boost clock of 2032 MHz. The RX 6600 LE has a game clock of 2045 MHz, a field that is not applicable for the NVIDIA part.

Power requirements differ dramatically. The RX 6600 LE has a TDP of 132 W and a suggested PSU of 300 W, while the B300 SXM6 AC has a TDP of 1100 W and a suggested PSU of 1500 W. The RX 6600 LE uses a single 8-pin power connector and is a dual-slot card, while the B300 SXM6 AC is an SXM module with no power connector listed.

The RX 6600 LE measures 190 mm in length, 110 mm in height, and 40 mm in width, with display outputs of 1x HDMI 2.1 and 3x DisplayPort 1.4a. The B300 SXM6 AC has no dimensions or display outputs recorded. The RX 6600 LE uses PCIe 4.0 x8, while the B300 SXM6 AC uses PCIe 6.0 x16.

Architecture Differences

The RX 6600 LE is built on AMD's RDNA 2.0 architecture using the Navi 23 chip, fabricated on a 7 nm process at TSMC. It contains 11,060 million transistors on a 237 mm² die, yielding a transistor density of 46.7 million per mm². The B300 SXM6 AC uses NVIDIA's Blackwell Ultra architecture with the GB110 chip, fabricated on a 5 nm process at TSMC. It contains 208,000 million transistors on a 1,628 mm² die, yielding a transistor density of 127.8 million per mm².

Memory architecture reflects the divergent design goals. The RX 6600 LE uses GDDR6 with a 128-bit interface, while the B300 SXM6 AC uses HBM3e with an 8192-bit interface. The B300 SXM6 AC supports FP16 at a 1:1 ratio with FP32, both at 76.99 TFLOPS, while the RX 6600 LE achieves FP16 at a 2:1 ratio, delivering 17.88 TFLOPS versus 8.942 TFLOPS FP32.

The RX 6600 LE belongs to the Radeon RX 6000 series and the Navi II generation, with a release date of December 7, 2023. The B300 SXM6 AC belongs to the Server Blackwell (Bxx) generation, with a release date of September 10, 2025. The RX 6600 LE lists its predecessor as Navi and successor as Navi III, while the B300 SXM6 AC lists its predecessor as Server Hopper and successor as Server Rubin.

Where Each One Wins

The B300 SXM6 AC wins decisively in raw compute and memory bandwidth. Its 76.99 TFLOPS FP32 output, 8.19 TB/s bandwidth, and 288 GB of HBM3e memory make it suitable for large-scale data center workloads, model training, and high-throughput inference. Its 25 percent lead over the NVIDIA L40S and 16.3 percent lead over the AMD Instinct MI300X confirm its position at the top of the server accelerator hierarchy.

The RX 6600 LE wins in graphics-oriented scenarios. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, has display outputs, and fits in a dual-slot 190 mm form factor. Its 132 W TDP allows operation with a 300 W suggested PSU, a fraction of the 1500 W required by the B300 SXM6 AC. Its pixel rate of 159.7 GPixel/s is more than three times the B300 SXM6 AC's 48.77 GPixel/s, reflecting its focus on rasterization and display output rather than pure compute throughput.

The RX 6600 LE also wins on accessibility and integration flexibility. Its PCIe 4.0 x8 interface, standard power connector, and compact dimensions allow installation in conventional desktop systems. The B300 SXM6 AC, as an SXM module with PCIe 6.0 x16 and no display outputs, requires a server platform designed for its power and cooling needs. The database records both products as Active in production status, but the recorded specifications make their intended environments unmistakable.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 6600 LE
B300 SXM6 AC
Core Specs
Shading Units
1,792
18,944 +957.1%
Shaders
1,792
18,944 +957.1%
TMUs
112
592 +428.6%
ROPs
64
24 -62.5%
Compute Units
28
—
SM Count
—
148
Clocks
Base Clock
1626 MHz
1665 MHz
Boost Clock
2495 MHz
2032 MHz
Game Clock
2045 MHz
—
Memory Clock
1750 MHz 14 Gbps effective
2000 MHz 8 Gbps effective
Memory
Memory Size
8 GB
288 GB
VRAM (MB)
8,192
294,912 +3500.0%
Memory Type
GDDR6
HBM3e
Memory Bus
128 bit
8192 bit
Bandwidth
224.0 GB/s
8.19 TB/s
Cache
L1 Cache
128 KB per Array
256 KB (per SM)
L2 Cache
2 MB
126 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
159.7 GPixel/s
48.77 GPixel/s
Texture Rate
279.4 GTexel/s
1,202.9 GTexel/s
FP32 (TFLOPS)
8.942 TFLOPS
76.99 TFLOPS
FP64 (TFLOPS)
558.9 GFLOPS (1:16)
1,202.9 GFLOPS (1:64)
FP16 (TFLOPS)
17.88 TFLOPS (2:1)
76.99 TFLOPS (1:1)
AI/RT
RT Cores
28
—
Tensor Cores
—
592
Power
TDP
132 W
1100 W
TDP (W)
132
1,100 +733.3%
Suggested PSU
300 W
1500 W
Power Connectors
1x 8-pin
—
Architecture
Architecture
RDNA 2.0
Blackwell Ultra
GPU Name
Navi 23
GB110
Generation
Navi II (RX 6000)
Server Blackwell (Bxx)
Process Size
7 nm
5 nm
Transistors
11,060 million
208,000 million
Die Size
237 mm²
1628 mm²
Foundry
TSMC
TSMC
Density
46.7M / mm²
127.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
—
OpenGL
4.6
—
Vulkan
1.4
—
OpenCL
2.1
3.0
CUDA
—
10.3
Shader Model
6.8
—
Physical
Slot Width
Dual-slot
SXM Module
Length
190 mm 7.5 inches
—
Height
110 mm 4.3 inches
—
Outputs
1x HDMI 2.13x DisplayPort 1.4a
No outputs
Bus Interface
PCIe 4.0 x8
PCIe 6.0 x16
Other
Production
Active
Active
Predecessor
Navi
Server Hopper
Successor
Navi III
Server Rubin
View Radeon RX 6600 LE Details View B300 SXM6 AC Details