AMD Radeon RX 7400 vs NVIDIA B300 SXM6 AC Comparison
AMD Radeon RX 7400
B300 SXM6 AC
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 7400 vs NVIDIA B300 SXM6 AC
Where Each One Wins
The recorded data separates these two products into entirely different performance domains. The AMD Radeon RX 7400 is a client-oriented graphics card with a broad set of DirectX and compute benchmarks, while the NVIDIA B300 SXM6 AC is a server accelerator with a single OpenCL measurement. The AMD part wins in every scenario where standard graphics APIs are exercised, because the NVIDIA part has no DirectX, OpenGL, or Vulkan support recorded. The B300 instead dominates the one metric that matters for its intended role: raw OpenCL compute throughput.
The RX 7400 shows wins across 3DMark Steel Nomad DX12 with a score of 1103, plus PassMark DirectX 10 at 59, DirectX 11 at 97, DirectX 12 at 44, DirectX 9 at 176, G2D at 1209, G3D at 11897, and GPU compute at 5152. These are the only benchmark entries for the AMD card. The B300 has exactly one recorded test, Geekbench OpenCL, where it scores 369831. That single number places it in the 100th percentile among all GPUs, whereas the RX 7400 sits at the 17th percentile. The performance split is therefore not about one card beating the other in overlapping tests, because no shared benchmark exists in the database. Instead, the data defines two separate use cases: graphics rendering and desktop acceleration for the AMD part, massive parallel compute for the NVIDIA part.
Architecture Differences
The two chips come from different architectural lineages. The RX 7400 uses the Navi 33 chip built on RDNA 3.0 architecture, with the codename Hotpink Bonefish, belonging to the Navi III generation within the RX 7000 series. It is fabricated by TSMC on a 6 nm process, containing 13,300 million transistors on a 204 mm² die, yielding a transistor density of 65.2 million per square millimeter. The B300 uses the GB110 chip based on Blackwell Ultra architecture, with no codename listed, and belongs to the Server Blackwell (Bxx) generation. It is also fabricated by TSMC but on a 5 nm process, housing 208,000 million transistors across a 1628 mm² die, for a density of 127.8 million per square millimeter.
The compute resources differ by an order of magnitude. The RX 7400 has 1792 shading units, 112 texture mapping units, 64 render output units, and 28 ray tracing cores, with no tensor cores recorded. The B300 has 18,944 shading units, 592 texture mapping units, 24 render output units, no ray tracing cores listed, and 592 tensor cores. The memory subsystem is equally divergent: the AMD card uses 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth, while the NVIDIA part uses 288 GB of HBM3e on an 8192-bit bus with 8.19 TB/s bandwidth. The B300's memory clock is recorded at 2000 MHz with 8 Gbps effective rate, whereas the RX 7400 runs memory at 2250 MHz with 18 Gbps effective.
The process node difference of 6 nm versus 5 nm, combined with the transistor counts, explains the density gap. The B300 packs over 15 times the transistors into roughly 8 times the die area. The RX 7400's RDNA 3.0 architecture supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the B300 lists N/A for all three APIs, confirming its compute-only role. The B300 has no display outputs, while the RX 7400 provides 1x HDMI 2.1a and 3x DisplayPort 2.1.
Head-to-Head Benchmarks
The database contains no shared benchmark results between these two products. The head-to-head benchmark list is empty, and the win counters show zero for both sides. This absence is itself informative. The RX 7400's highest compute score is 5152 on PassMark GPU compute, while the B300's only score is 369831 on Geekbench OpenCL. Direct comparison of these numbers is not possible because the tests differ, but the magnitude gap illustrates the intended performance class separation.
The nearest rivals provide context for each product's standing. The RX 7400 has an average benchmark score of 2467, with closest competitors being the AMD Radeon 8040S at 2440 (1.1% ahead), the NVIDIA GeForce 710M at 2433 (1.4% ahead), the Intel HD Graphics 610 at 2425 (1.8% ahead), and the NVIDIA GeForce GT 710M at 2422 (1.9% ahead). These are all older or entry-level parts, confirming the RX 7400's position near the low end of the performance spectrum. The B300's average score of 369831 places it far above its nearest rivals: the NVIDIA B200 at 345482 (7% behind), the NVIDIA H200 NVL at 334891 (10.4% behind), the AMD Instinct MI300X at 317994 (16.3% behind), and the NVIDIA L40S at 295763 (25% behind). The B300 leads its nearest competitor by 7% and its fourth competitor by 25%, demonstrating a commanding lead within the server accelerator segment.
The RX 7400's percentile rank of 17 means it outperforms only a small fraction of all recorded GPUs. The B300's percentile rank of 100 means it outperforms every other GPU in the database on the single OpenCL test. These percentiles are derived from different benchmark suites, so they do not directly compare across the two products, but they do establish each card's relative standing within its own test environment.
Specification Differences
The two products differ across nearly every recorded specification. The process node is 6 nm for the AMD part and 5 nm for the NVIDIA part. Transistor count is 13,300 million versus 208,000 million. Die size is 204 mm² versus 1628 mm². Transistor density is 65.2M per mm² versus 127.8M per mm². Base clock is 1452 MHz versus 1665 MHz, and boost clock is 2300 MHz versus 2032 MHz. The RX 7400 has a game clock of 2200 MHz, while the B300 has no game clock recorded. Memory size is 8 GB versus 288 GB, memory type is GDDR6 versus HBM3e, bus width is 128 bit versus 8192 bit, and bandwidth is 288.0 GB/s versus 8.19 TB/s.
Shading units are 1792 versus 18944, TMUs are 112 versus 592, and ROPs are 64 versus 24. The RX 7400 has 28 ray tracing cores and no tensor cores; the B300 has no ray tracing cores recorded and 592 tensor cores. Pixel rate is 147.2 GPixel/s for the AMD card versus 48.77 GPixel/s for the NVIDIA part, an unusual inversion where the smaller card has a higher pixel rate due to its ROP count. Texture rate is 257.6 GTexel/s versus 1,202.9 GTexel/s. FP32 throughput is 16.49 TFLOPS versus 76.99 TFLOPS. FP16 is 32.97 TFLOPS (2:1) for the AMD card versus 76.99 TFLOPS (1:1) for the NVIDIA card.
Power draw is 43 W versus 1100 W. The RX 7400 is dual-slot with a 1x 6-pin power connector and a suggested PSU of 200 W. The B300 is an SXM Module with no power connector listed and a suggested PSU of 1500 W. Bus interface is PCIe 4.0 x8 versus PCIe 6.0 x16. Display outputs are 1x HDMI 2.1a and 3x DisplayPort 2.1 versus no outputs. The API support differs completely, with the AMD card listing DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the NVIDIA card lists N/A for all three. Release dates are 2025-08-07 for the RX 7400 and 2025-09-10 for the B300. The AMD card's production status is not recorded, while the B300 is marked as Active.
FAQ
Q: Which card has the higher average benchmark score?
A: The NVIDIA B300 SXM6 AC has an average benchmark score of 369831, while the AMD Radeon RX 7400 has an average score of 2467. The B300's score is derived from a single Geekbench OpenCL test, whereas the RX 7400's score is the average of eight PassMark and 3DMark tests.
Q: What are the closest rivals for each card?
A: The RX 7400's nearest rival is the AMD Radeon 8040S with an average score of 2440, a delta of 1.1%. The B300's nearest rival is the NVIDIA B200 with an average score of 345482, a delta of 7%.
Q: How do the memory capacities differ?
A: The RX 7400 has 8 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s bandwidth. The B300 has 288 GB of HBM3e memory on an 8192-bit bus with 8.19 TB/s bandwidth.
Q: What is the power requirement difference?
A: The RX 7400 has a TDP of 43 W and a suggested PSU of 200 W. The B300 has a TDP of 1100 W and a suggested PSU of 1500 W.
Q: Does the B300 support any graphics APIs?
A: No. The B300 lists DirectX, OpenGL, and Vulkan all as N/A. The RX 7400 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Q: What percentile does each card rank in among all GPUs?
A: The RX 7400 ranks in the 17th percentile, while the B300 ranks in the 100th percentile. These percentiles are based on different benchmark suites and should not be directly compared across the two products.
Q: Which card has more shading units?
A: The B300 has 18,944 shading units, compared to 1,792 for the RX 7400. The B300 also has 592 texture mapping units and 592 tensor cores, while the RX 7400 has 112 TMUs and 64 ROPs.
The Verdict
The data defines two non-overlapping product categories. The AMD Radeon RX 7400 is a low-power graphics card for standard desktop use, evidenced by its 43 W TDP, dual-slot design, display outputs, and full support for DirectX 12 Ultimate, OpenGL, and Vulkan. Its benchmark results span multiple graphics and compute tests, and its nearest rivals are all older or entry-level parts. The NVIDIA B300 SXM6 AC is a high-power server accelerator with 1100 W TDP, no display outputs, no graphics API support, and a single OpenCL benchmark result. Its nearest rivals are other server accelerators, and it leads them by margins of 7% to 25%.
Anyone selecting between these two products faces a clear choice based on workload. The RX 7400 is the only one of the two that can render graphics, run DirectX applications, or output to a display. The B300 cannot do any of those things, but it delivers compute throughput that places it in the 100th percentile among all GPUs on the recorded OpenCL test. The RX 7400's 16.49 TFLOPS FP32 and 32.97 TFLOPS FP16 are dwarfed by the B300's 76.99 TFLOPS for both FP32 and FP16. The B300 also has 36 times the memory capacity and 28 times the memory bandwidth, though the RX 7400 has a higher pixel rate of 147.2 GPixel/s versus 48.77 GPixel/s.
The production status of the RX 7400 is not recorded, while the B300 is listed as Active. The release dates are close, with the RX 7400 on 2025-08-07 and the B300 on 2025-09-10. The B300's predecessor is Server Hopper and its successor is Server Rubin, while the RX 7400's predecessor is Navi II and successor is Navi IV. The data shows that the RX 7400 belongs in a client system, and the B300 belongs in a server rack. There is no scenario in the recorded data where either product can substitute for the other.