AMD Radeon RX 7600M vs NVIDIA B300 SXM6 AC Comparison
AMD Radeon RX 7600M
B300 SXM6 AC
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 7600M vs NVIDIA B300 SXM6 AC
Head-to-Head Benchmarks
The only directly comparable measurement in the database is the Geekbench OpenCL benchmark. The NVIDIA B300 SXM6 AC records a score of 369,831, while the AMD Radeon RX 7600M scores 63,775. That is a delta of 82.8% in favor of the NVIDIA part, meaning the B300 delivers roughly 5.8 times the OpenCL throughput of the RX 7600M. This is not a close contest by any measure.
The NVIDIA B300 SXM6 AC sits at the 100th percentile among all GPUs in the database. Its nearest rivals confirm the scale of its lead. The NVIDIA B200 averages 345,482, which is 7% behind. The NVIDIA H200 NVL scores 334,891, a 10.4% deficit. The AMD Instinct MI300X posts 317,994, trailing by 16.3%. Even the NVIDIA L40S, a strong compute part in its own right, reaches only 295,763, which is 25% lower. The B300 is not merely ahead; it is ahead of the next-best recorded result by a wide margin.
The AMD Radeon RX 7600M, by contrast, sits at the 89th percentile. Its nearest rivals are all much closer in performance. The AMD Radeon RX 9060 XT LP averages 63,830, a negligible 0.1% difference. The NVIDIA CMP 30HX also averages 63,842, again 0.1% off. The AMD Radeon Pro Vega 56 scores 63,693, which is 0.1% higher than the RX 7600M. The AMD Radeon Pro WX 9100 reaches 64,212, a 0.7% advantage. In this neighborhood, the RX 7600M is effectively in a dead heat with several other mid-range parts. The gap between these two products is not a matter of tuning or driver maturity; it is a chasm in raw compute capability.
The delta of 82.8% in the head-to-head record is the only direct comparison available, and it tells the whole story. The B300 SXM6 AC wins the single recorded benchmark outright. The RX 7600M has zero wins in the database. Every metric that follows, from memory bandwidth to shader count to FP32 throughput, aligns with that result.
Where Each One Wins
The AMD Radeon RX 7600M is a mobile GPU built for portability. Its 90 W TDP and IGP slot width mean it fits into laptops and compact systems where power and space are limited. It has display outputs described as portable device dependent, so it can drive screens directly, which is essential for a notebook GPU. The RX 7600M supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, making it a viable option for gaming and general graphics workloads on the move. Its 8 GB of GDDR6 memory on a 128 bit bus delivers 256.0 GB/s of bandwidth, enough for 1080p gaming and lighter compute tasks.
The NVIDIA B300 SXM6 AC is a server accelerator with no display outputs at all. It is a compute device, period. Its 288 GB of HBM3e memory on an 8192 bit bus provides 8.19 TB/s of bandwidth, a figure that eclipses the RX 7600M by more than 30 times. The B300 has 592 tensor cores, which the RX 7600M lacks entirely. Its FP16 throughput is 76.99 TFLOPS at a 1:1 ratio, whereas the RX 7600M reaches 34.55 TFLOPS only with a 2:1 shader ratio. The B300 is designed for training, inference, and scientific computing, not for driving a monitor.
The use case split is clear. The RX 7600M wins in the mobile and consumer graphics space because it is the only one of the two that can output video and run standard graphics APIs. The B300 wins in every raw compute scenario, from large language model training to HPC simulation, because its memory capacity, bandwidth, and FP32 throughput are in a different class. The RX 7600M records a pixel rate of 154.2 GPixel/s and a texture rate of 269.9 GTexel/s, which are respectable for a mobile part. The B300's texture rate is 1,202.9 GTexel/s, but its pixel rate is only 48.77 GPixel/s, a consequence of having just 24 ROPs. That low ROP count reinforces that the B300 is not built for rasterization-heavy graphics work.
Architecture Differences
The RX 7600M uses the Navi 33 chip on TSMC's 6 nm process. It is built on RDNA 3.0 architecture with the codename Hotpink Bonefish. The die size is 204 mm² and it packs 13,300 million transistors, yielding a transistor density of 65.2 million per mm². The B300 SXM6 AC uses the GB110 chip on TSMC's 5 nm process with Blackwell Ultra architecture. Its die is 1628 mm², holding 208,000 million transistors for a density of 127.8 million per mm². The B300 packs more than 15 times the transistor count onto a die that is eight times larger, with nearly double the density.
The memory subsystems could not be more different. The RX 7600M uses 8 GB of GDDR6 on a 128 bit bus with 256.0 GB/s of bandwidth. The B300 uses 288 GB of HBM3e on an 8192 bit bus with 8.19 TB/s of bandwidth. That is 36 times the capacity and 32 times the bandwidth. The B300 has 18,944 shading units, 592 TMUs, and 592 tensor cores. The RX 7600M has 1,792 shading units, 112 TMUs, and 28 ray tracing cores. The RX 7600M has 64 ROPs, while the B300 has only 24, an unusual inversion that reflects their divergent purposes.
Clock behavior also differs. The RX 7600M has a base clock of 1500 MHz, a game clock of 2070 MHz, and a boost clock of 2410 MHz. The B300 runs at a base of 1665 MHz and a boost of 2032 MHz, with no game clock listed. The B300's memory runs at 2000 MHz with 8 Gbps effective speed, while the RX 7600M's memory is also at 2000 MHz but with 16 Gbps effective speed. Despite the lower effective memory speed, the B300's enormous bus width makes its bandwidth figure dwarf the RX 7600M.
Power and interface differences are stark. The RX 7600M has a 90 W TDP, no power connectors, and a PCIe 4.0 x16 interface. The B300 has a 1100 W TDP, a suggested PSU of 1500 W, and a PCIe 6.0 x16 interface. The B300 is an SXM module, while the RX 7600M is an IGP. The RX 7600M supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. The B300 lists N/A for all three graphics APIs, confirming it is not intended for client-side rendering. The RX 7600M's FP32 output is 17.27 TFLOPS, while the B300 reaches 76.99 TFLOPS, a 4.5 times advantage.
FAQ
Q: Which GPU has the higher OpenCL benchmark score?
A: The NVIDIA B300 SXM6 AC scores 369,831 in Geekbench OpenCL, while the AMD Radeon RX 7600M scores 63,775. The B300 leads by 82.8% in the head-to-head comparison.
Q: How does the memory capacity compare?
A: The B300 SXM6 AC has 288 GB of HBM3e memory on an 8192 bit bus with 8.19 TB/s bandwidth. The RX 7600M has 8 GB of GDDR6 on a 128 bit bus with 256.0 GB/s bandwidth.
Q: Which GPU supports display outputs?
A: The RX 7600M has display outputs described as portable device dependent. The B300 SXM6 AC has no display outputs.
Q: What are the TDP requirements?
A: The RX 7600M has a 90 W TDP. The B300 SXM6 AC has a 1100 W TDP and a suggested PSU of 1500 W.
Q: Does the B300 have tensor cores?
A: Yes, the B300 has 592 tensor cores. The RX 7600M has no tensor cores, but it does have 28 ray tracing cores.
Q: What is the transistor count difference?
A: The B300 contains 208,000 million transistors on a 1628 mm² die. The RX 7600M contains 13,300 million transistors on a 204 mm² die.
The Verdict
The data points to two completely different products. The AMD Radeon RX 7600M is a mobile GPU for laptops and compact systems. It draws 90 W, outputs video, supports standard graphics APIs, and delivers 17.27 TFLOPS of FP32 performance. Its OpenCL score of 63,775 places it at the 89th percentile, surrounded by similar mid-range parts like the Radeon RX 9060 XT LP and the Radeon Pro Vega 56, all within 0.7% of each other. Anyone needing a capable mobile graphics solution with DirectX 12 Ultimate and Vulkan support should look at the RX 7600M.
The NVIDIA B300 SXM6 AC is a server accelerator with 1100 W TDP, no display outputs, and no consumer graphics API support. It scores 369,831 in OpenCL, placing it at the 100th percentile. Its nearest rival, the NVIDIA B200, is 7% behind. The H200 NVL is 10.4% behind, and the Instinct MI300X trails by 16.3%. With 288 GB of HBM3e and 8.19 TB/s of bandwidth, the B300 is for compute workloads that demand massive memory and throughput.
The benchmark results confirm the obvious: the B300 is roughly 5.8 times faster in OpenCL than the RX 7600M. That difference is not a surprise given the 15.6 times transistor count advantage and 4.5 times FP32 throughput. The RX 7600M wins in mobility, graphics API support, and power efficiency. The B300 wins in every raw compute metric. Choosing between them is not a question of which is better; it is a question of which workload is being addressed.
Specification Differences
| Field | AMD Radeon RX 7600M | NVIDIA B300 SXM6 AC |
|---|---|---|
| Architecture | RDNA 3.0 | Blackwell Ultra |
| Process node | 6 nm | 5 nm |
| Transistors | 13,300 million | 208,000 million |
| Die size | 204 mm² | 1628 mm² |
| Transistor density | 65.2M / mm² | 127.8M / mm² |
| Base clock | 1500 MHz | 1665 MHz |
| Boost clock | 2410 MHz | 2032 MHz |
| Memory size | 8 GB | 288 GB |
| Memory type | GDDR6 | HBM3e |
| Memory bus | 128 bit | 8192 bit |
| Memory bandwidth | 256.0 GB/s | 8.19 TB/s |
| Shading units | 1792 | 18944 |
| TMUs | 112 | 592 |
| ROPs | 64 | 24 |
| Ray tracing cores | 28 | N/A |
| Tensor cores | N/A | 592 |
| FP32 | 17.27 TFLOPS | 76.99 TFLOPS |
| FP16 | 34.55 TFLOPS (2:1) | 76.99 TFLOPS (1:1) |
| Pixel rate | 154.2 GPixel/s | 48.77 GPixel/s |
| Texture rate | 269.9 GTexel/s | 1,202.9 GTexel/s |
| TDP | 90 W | 1100 W |
| Slot width | IGP | SXM Module |
| Suggested PSU | N/A | 1500 W |
| Bus interface | PCIe 4.0 x16 | PCIe 6.0 x16 |
| Display outputs | Portable Device Dependent | No outputs |
| DirectX | 12 Ultimate (12_2) | N/A |
| OpenGL | 4.6 | N/A |
| Vulkan | 1.4 | N/A |
| Release date | 2023-01-03 | 2025-09-10 |
| Predecessor | Polaris Mobile | Server Hopper |
| Successor | N/A | Server Rubin |