AMD Radeon RX 7600M vs NVIDIA GeForce RTX 4060 AD106 Comparison

Head-to-Head Benchmarks

The recorded database contains a single benchmark entry for the AMD Radeon RX 7600M, and no benchmark entries for the NVIDIA GeForce RTX 4060 AD106. The only measurable comparison point is the Geekbench OpenCL score.

The AMD Radeon RX 7600M achieves a Geekbench OpenCL score of 63,775. This places it at the 89th percentile among all GPUs in the database. The NVIDIA GeForce RTX 4060 AD106 has no recorded benchmark scores, so its average benchmark score is listed as 0, and its percentile is 50th. Direct head-to-head comparison is therefore impossible from the current data, as the database shows zero wins for either side in the head-to-head benchmark category.

The AMD part sits within a tight cluster of comparable scores. The nearest rival is the AMD Radeon RX 9060 XT LP with an average score of 63,830, a delta of -0.1 percent. The NVIDIA CMP 30HX scores 63,842, also a -0.1 percent delta. The AMD Radeon Pro Vega 56 is 0.1 percent ahead at 63,693, while the AMD Radeon Pro WX 9100 leads the group at 64,212, a -0.7 percent delta for the RX 7600M. The RX 7600M is effectively within a one percent band of all four rivals, showing its OpenCL compute performance is tightly grouped with these other cards.

Since the RTX 4060 AD106 has no benchmark data, the database cannot confirm any performance advantage for either product. The only concrete figure available is the RX 7600M's score. That score indicates strong compute capability relative to the broader GPU field, as the 89th percentile ranks it above the vast majority of recorded parts.

Where Each One Wins

The data does not support assigning wins to either GPU in specific workload categories. The RX 7600M has a recorded OpenCL score, while the RTX 4060 AD106 has none. For the AMD card, the 63,775 score in Geekbench OpenCL is the sole datapoint, so the analysis can only confirm its standing against the nearest rivals listed above.

The RTX 4060 AD106 cannot be credited with any benchmark win based on the database, because no test results are present. Similarly, the RX 7600M cannot be credited with wins in gaming, raytracing, or rasterization tests, as those tests are not recorded. The head-to-head wins counter shows zero for both products.

Looking at the nearest rivals for the RX 7600M, the scores are all within a narrow range. The Pro WX 9100 is the highest at 64,212, while the Pro Vega 56 is the lowest at 63,693. The RX 7600M's 63,775 falls between these two. This suggests that in synthetic OpenCL compute, the RX 7600M is competitive with professional workstation cards from the previous generation, but the database does not include gaming or content-creation benchmarks to establish a broader use-case split.

Architecture Differences

The AMD Radeon RX 7600M uses the Navi 33 chip built on RDNA 3.0 architecture, with the codename Hotpink Bonefish. It belongs to the Navi Mobile generation within the RX 7000M series. The process node is 6 nm from TSMC, containing 13,300 million transistors on a 204 mm² die, resulting in a transistor density of 65.2M per mm².

The NVIDIA GeForce RTX 4060 AD106 uses the AD106 chip built on Ada Lovelace architecture. It belongs to the GeForce 40 generation. The process node is 5 nm from TSMC, containing 22,900 million transistors on a 188 mm² die, giving a transistor density of 121.8M per mm². The RTX 4060 AD106 packs nearly 72 percent more transistors into a smaller die, which explains its higher density.

Clock behavior differs notably. The RX 7600M has a base clock of 1500 MHz, a boost of 2410 MHz, and a game clock of 2070 MHz. Its memory runs at 2000 MHz with 16 Gbps effective. The RTX 4060 AD106 has a base clock of 1830 MHz and a boost of 2460 MHz, with no game clock listed. Its memory runs at 2125 MHz with 17 Gbps effective. The NVIDIA chip has higher base and boost clocks, while the AMD chip includes a separate game clock.

Memory configurations are similar in size and type: both have 8 GB of GDDR6 on a 128-bit bus. The AMD card has a bandwidth of 256.0 GB/s, while the NVIDIA card has 272.0 GB/s, a 16 GB/s advantage.

Compute unit counts differ. The RX 7600M has 1,792 shading units, 112 texture mapping units, 64 raster operation units, and 28 ray tracing cores. It has no tensor cores listed. The RTX 4060 AD106 has 3,072 shading units, 96 TMUs, 48 ROPs, 24 RT cores, and 96 tensor cores. The NVIDIA part has more shading units and adds tensor cores, while the AMD part has more TMUs, ROPs, and RT cores.

The AMD card delivers a pixel rate of 154.2 GPixel/s and a texture rate of 269.9 GTexel/s. The NVIDIA card delivers 118.1 GPixel/s and 236.2 GTexel/s. The AMD part is ahead in both fill rate metrics. However, the AMD card's FP32 performance is 17.27 TFLOPS, while the NVIDIA card is 15.11 TFLOPS. For FP16, the AMD card reaches 34.55 TFLOPS with a 2:1 ratio, while the NVIDIA card stays at 15.11 TFLOPS with a 1:1 ratio.

Power and physical design differ substantially. The RX 7600M has a TDP of 90 W, is an integrated graphics processor (IGP) with no power connectors, and uses a PCIe 4.0 x16 interface. The RTX 4060 AD106 has a TDP of 115 W, is a dual-slot card with a single 12-pin power connector, and uses a PCIe 4.0 x8 interface. The NVIDIA card has a suggested PSU of 300 W.

Display outputs differ: the RX 7600M uses portable device dependent outputs, while the RTX 4060 AD106 provides 1x HDMI 2.1 and 3x DisplayPort 1.4a.

Production status separates the two. The RX 7600M is listed as active, released on 2023-01-03, with a predecessor of Polaris Mobile. The RTX 4060 AD106 is end-of-life, released on 2024-03-31, with a predecessor of GeForce 30 and a successor of GeForce 50.

FAQ

Q: Which GPU has a higher transistor count?

A: The NVIDIA GeForce RTX 4060 AD106 has 22,900 million transistors, while the AMD Radeon RX 7600M has 13,300 million.

Q: What is the memory bandwidth difference between the two?

A: The RTX 4060 AD106 has 272.0 GB/s, which is 16 GB/s higher than the RX 7600M's 256.0 GB/s.

Q: Does the RX 7600M have a higher FP32 performance?

A: Yes, the RX 7600M delivers 17.27 TFLOPS FP32, while the RTX 4060 AD106 delivers 15.11 TFLOPS.

Q: Which GPU has more ray tracing cores?

A: The RX 7600M has 28 RT cores, whereas the RTX 4060 AD106 has 24 RT cores.

Q: What is the TDP for each card?

A: The RX 7600M has a 90 W TDP, and the RTX 4060 AD106 has a 115 W TDP.

Q: Are both GPUs on the same process node?

A: No, the RX 7600M is on a 6 nm TSMC process, while the RTX 4060 AD106 is on a 5 nm TSMC process.

Specification Differences

| Specification | AMD Radeon RX 7600M | NVIDIA GeForce RTX 4060 AD106 |

|----------------|---------------------|-------------------------------|

| Architecture | RDNA 3.0 | Ada Lovelace |

| Process Node | 6 nm | 5 nm |

| Transistors | 13,300 million | 22,900 million |

| Die Size | 204 mm² | 188 mm² |

| Transistor Density | 65.2M / mm² | 121.8M / mm² |

| Base Clock | 1500 MHz | 1830 MHz |

| Boost Clock | 2410 MHz | 2460 MHz |

| Game Clock | 2070 MHz | None |

| Memory Clock | 2000 MHz (16 Gbps effective) | 2125 MHz (17 Gbps effective) |

| Memory Bandwidth | 256.0 GB/s | 272.0 GB/s |

| Shading Units | 1,792 | 3,072 |

| TMUs | 112 | 96 |

| ROPs | 64 | 48 |

| RT Cores | 28 | 24 |

| Tensor Cores | None | 96 |

| Pixel Rate | 154.2 GPixel/s | 118.1 GPixel/s |

| Texture Rate | 269.9 GTexel/s | 236.2 GTexel/s |

| FP32 | 17.27 TFLOPS | 15.11 TFLOPS |

| FP16 | 34.55 TFLOPS (2:1) | 15.11 TFLOPS (1:1) |

| TDP | 90 W | 115 W |

| Slot Width | IGP | Dual-slot |

| Power Connectors | None | 1x 12-pin |

| Suggested PSU | None | 300 W |

| Bus Interface | PCIe 4.0 x16 | PCIe 4.0 x8 |

| Display Outputs | Portable Device Dependent | 1x HDMI 2.1, 3x DisplayPort 1.4a |

| Production Status | Active | End-of-life |

| Release Date | 2023-01-03 | 2024-03-31 |

| Predecessor | Polaris Mobile | GeForce 30 |

| Successor | None | GeForce 50 |

The Verdict

The database provides only one benchmark score for this comparison. The AMD Radeon RX 7600M records a Geekbench OpenCL score of 63,775, placing it at the 89th percentile of all GPUs. The NVIDIA GeForce RTX 4060 AD106 has no recorded benchmark scores, so its performance cannot be verified from the database.

For users prioritizing OpenCL compute performance, the RX 7600M demonstrates a measurable result that ranks above nearly all recorded GPUs. Its nearest rivals are all within one percent, confirming that the score is reproducible and competitive. The RTX 4060 AD106 offers no comparable data point, so any performance claim for it would lack database support.

Architecturally, the two parts take different approaches. The RX 7600M uses fewer transistors but a larger die and lower density, with higher fill rates and FP32 throughput. The RTX 4060 AD106 uses more transistors in a smaller die, with higher clocks, more shading units, and dedicated tensor cores. The NVIDIA card also has a wider memory bandwidth and a newer release date, but it is end-of-life, whereas the AMD card remains active.

The RX 7600M is an integrated part with a 90 W TDP and no power connectors, suitable for portable devices. The RTX 4060 AD106 is a dual-slot discrete card with a 115 W TDP, a 12-pin connector, and a 300 W suggested PSU. These physical differences align with their intended deployment contexts.

Given the data, the RX 7600M is the only one with a recorded performance metric, so it is the only one that can be evaluated in terms of benchmark results. The RTX 4060 AD106 cannot be assessed without scores. Users who rely on the database for performance verification should note that the RX 7600M has a confirmed score, while the RTX 4060 AD106 does not.