AMD Radeon Pro Vega II vs NVIDIA B300 SXM6 AC Comparison
AMD Radeon Pro Vega II
B300 SXM6 AC
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon Pro Vega II vs NVIDIA B300 SXM6 AC
Head-to-Head Benchmarks
The only directly comparable benchmark in the database is Geekbench OpenCL, and the result is decisively one-sided. The NVIDIA B300 SXM6 AC records a score of 369,831, while the AMD Radeon Pro Vega II scores 99,048. That represents a delta of 273.4%, meaning the NVIDIA part is nearly four times faster in this compute workload. The gap is so large that it underscores the generational and architectural chasm between the two products.
For context, the B300 SXM6 AC sits at the 100th percentile of all GPUs in the database, with an average benchmark score of 369,831. Its nearest rivals are the NVIDIA B200 (average score 345,482, 7% behind), the NVIDIA H200 NVL (334,891, 10.4% behind), the AMD Instinct MI300X (317,994, 16.3% behind), and the NVIDIA L40S (295,763, 25% behind). The B300 leads all of them by comfortable margins, and the Radeon Pro Vega II does not appear anywhere in that rival list.
The Radeon Pro Vega II, by contrast, sits at the 94th percentile, with an average benchmark score of 109,617 across its three recorded tests. Its nearest rivals cluster much closer: the AMD Radeon PRO W7900 (110,725, 1% ahead), the AMD Radeon Pro W6600X (107,342, 2.1% behind), the AMD Radeon Pro Vega II Duo (106,750, 2.7% behind), and the NVIDIA RTX A5500 Mobile (113,944, 3.8% ahead). The Vega II's OpenCL score of 99,048 is actually below its own average, dragged down by that specific test, while its Metal score of 130,183 and Vulkan score of 99,621 show a more balanced profile.
The head-to-head table shows one win for the NVIDIA part and zero for the AMD part. No other shared benchmarks exist in the database, so the OpenCL result stands as the sole quantitative comparison. That single data point, however, is enough to establish a definitive performance hierarchy: the B300 is in a different performance class entirely.
Where Each One Wins
The use-case split is stark. The NVIDIA B300 SXM6 AC dominates in raw compute throughput, as evidenced by its OpenCL score. With 18,944 shading units, 592 tensor cores, and 76.99 TFLOPS of FP32 compute, it is built for massive parallel workloads. Its 288 GB of HBM3e memory with 8.19 TB/s of bandwidth and an 8192-bit bus width make it suitable for large-scale AI training, scientific simulation, and data center compute tasks where memory capacity and bandwidth are critical. The 1,100 W TDP and suggested PSU of 1,500 W indicate it is designed for rack-mounted server environments, not desktop use.
The AMD Radeon Pro Vega II wins in entirely different categories. It has 4,096 shading units, 64 ROPS, and a pixel rate of 110.1 GPixel/s, which is more than double the B300's 48.77 GPixel/s. Its FP16 throughput of 28.18 TFLOPS (2:1 ratio) is also relatively strong for its era. The Vega II is a professional workstation card with display outputs (1x HDMI 2.0b and 4x Thunderbolt), support for DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.3. It is a Quad-slot card with a 475 W TDP and a suggested PSU of 850 W. It connects via Apple MPX, which makes it specifically designed for Apple Mac Pro systems.
The data suggests the Vega II is the right tool for graphics-heavy professional workflows, video output, and macOS ecosystem compatibility. The B300 has no display outputs and no API support listed for DirectX, OpenGL, or Vulkan, which means it is not intended for interactive graphics or workstation display tasks. Instead, its strengths lie in compute acceleration where raw FP32 and memory bandwidth matter more than pixel throughput.
Architecture Differences
The two GPUs come from different eras and design philosophies. The NVIDIA B300 is built on the Blackwell Ultra architecture, using the GB110 chip fabricated on a 5 nm process at TSMC. It packs 208,000 million transistors on a die size of 1,628 mm², yielding a transistor density of 127.8 million per square millimeter. The Radeon Pro Vega II uses the GCN 5.1 architecture with the Vega 20 chip on a 7 nm process, also from TSMC. It has 13,230 million transistors on a 331 mm² die, for a density of 40.0 million per square millimeter. The B300 has over 15 times more transistors and nearly five times the die area.
Memory configurations diverge sharply. The B300 uses 288 GB of HBM3e with an 8192-bit bus and 8.19 TB/s bandwidth. The Vega II uses 32 GB of HBM2 with a 4096-bit bus and 825.3 GB/s bandwidth. That is a nine-fold difference in capacity and a ten-fold difference in bandwidth. Clock speeds also differ: the B300 runs at 1665 MHz base and 2032 MHz boost, while the Vega II runs at 1574 MHz base and 1720 MHz boost. The B300's memory clock is listed as 2000 MHz (8 Gbps effective), while the Vega II's memory clock is 806 MHz (1612 Mbps effective).
Compute resources tell a similar story. The B300 has 18,944 shading units, 592 TMUs, 24 ROPs, and 592 tensor cores. The Vega II has 4,096 shading units, 256 TMUs, 64 ROPs, and no tensor cores. The B300's FP32 throughput is 76.99 TFLOPS, compared to the Vega II's 14.09 TFLOPS. The B300's FP16 is listed as 76.99 TFLOPS (1:1 ratio), while the Vega II's FP16 is 28.18 TFLOPS (2:1 ratio). Pixel and texture rates differ as well: the B300 outputs 48.77 GPixel/s and 1,202.9 GTexel/s, while the Vega II outputs 110.1 GPixel/s and 440.3 GTexel/s.
The B300 is a PCIe 6.0 x16 card in an SXM module form factor, with no display outputs and no API support listed. The Vega II uses the Apple MPX interface, is Quad-slot, has display outputs, and supports DirectX 12, OpenGL 4.6, and Vulkan 1.3. Production status also differs: the B300 is active, released on September 10, 2025, while the Vega II is end-of-life, released on June 2, 2019. The B300's predecessor is Server Hopper and its successor is Server Rubin. The Vega II has no listed predecessor or successor.
FAQ
Q: How much faster is the NVIDIA B300 SXM6 AC than the AMD Radeon Pro Vega II in OpenCL?
A: The B300 achieves 369,831 points in Geekbench OpenCL, while the Vega II scores 99,048. That is a delta of 273.4%, meaning the B300 is roughly 3.7 times faster in this test.
Q: Does the AMD Radeon Pro Vega II have any benchmark where it beats the B300?
A: No. The database contains only one shared benchmark, Geekbench OpenCL, and the B300 wins that test. The Vega II has additional Metal and Vulkan scores, but the B300 has no recorded results for those tests.
Q: What memory do the two GPUs use, and how does capacity compare?
A: The B300 uses 288 GB of HBM3e with an 8192-bit bus and 8.19 TB/s bandwidth. The Vega II uses 32 GB of HBM2 with a 4096-bit bus and 825.3 GB/s bandwidth. The B300 has nine times the capacity and roughly ten times the bandwidth.
Q: Can the B300 be used for display output or graphics workstations?
A: No. The B300 has no display outputs and no listed API support for DirectX, OpenGL, or Vulkan. It is a server-oriented SXM module. The Vega II, by contrast, has 1x HDMI 2.0b and 4x Thunderbolt outputs, plus full API support.
Q: What is the thermal design power difference between the two?
A: The B300 has a TDP of 1,100 W with a suggested PSU of 1,500 W. The Vega II has a TDP of 475 W with a suggested PSU of 850 W. The B300 requires substantially more power and cooling infrastructure.
Q: Which GPU has a higher pixel fill rate?
A: The AMD Radeon Pro Vega II has a pixel rate of 110.1 GPixel/s, which is more than double the B300's 48.77 GPixel/s. The Vega II also has 64 ROPs compared to the B300's 24 ROPs.
The Verdict
The data points to a clear conclusion: these are not competing products. The NVIDIA B300 SXM6 AC is a server-class compute accelerator with a 100th percentile ranking, a 273.4% OpenCL lead over the Vega II, and nearest rivals that are all within 7% to 25% behind it. If the workload is large-scale compute, AI training, or memory-bound data center tasks, the B300 is the obvious choice. Its 288 GB of HBM3e, 8.19 TB/s bandwidth, and 76.99 TFLOPS of FP32 performance are unmatched in this comparison.
The AMD Radeon Pro Vega II, on the other hand, is a workstation GPU for Apple Mac Pro systems. Its 94th percentile ranking, Metal score of 130,183, and display outputs make it suitable for graphics-intensive professional work, video editing, and tasks that require API support and pixel throughput. Its 110.1 GPixel/s pixel rate and 64 ROPs are strong for rasterization-heavy workloads. It is end-of-life, but it still holds its own among its nearest rivals, which are all within 4% of its average score.
For a user choosing between them, the decision hinges on the environment. If the system is a server rack and the task is compute acceleration, the B300 wins without contest. If the system is a Mac Pro and the task involves graphics output, the Vega II is the only one that fits. The B300 has no display outputs, no API support, and a form factor that is incompatible with workstation chassis. The Vega II, conversely, lacks the memory capacity, bandwidth, and raw compute power for modern AI-scale workloads.
The database records one clear winner in raw performance, but it also records two products with fundamentally different purposes. The B300 is the benchmark leader; the Vega II is the specialized workstation tool. Both are valid within their respective domains, but they are not substitutes for one another.