Intel UHD Graphics 710 Mobile vs Lisuan Tech LX ULTRA Comparison

Head-to-Head Benchmarks

The database contains no recorded head-to-head benchmark results for the Intel UHD Graphics 710 Mobile versus the Lisuan Tech LX ULTRA. Both entries show an average benchmark score of zero and an empty benchmark array, meaning no synthetic or real-world performance measurements have been logged for either part. Consequently, there are no exact percentage deltas, no comparative frame rate data, and no percentile shifts to report from direct testing.

The absence of measured scores does not indicate parity. It reflects a lack of submitted data. The Intel UHD Graphics 710 Mobile sits in the 50th percentile of all GPUs in the database, and the Lisuan Tech LX ULTRA also sits in the 50th percentile, but those percentiles are derived from zero recorded benchmark runs, so they carry no statistical weight. Without nearest rivals listed for either product, the database offers no reference points for relative positioning.

What the data does show is a massive structural gap in compute resources. The LX ULTRA carries 6144 shading units, 192 texture mapping units, and 96 render output units. The Intel part carries 128 shading units, 8 TMUs, and 4 ROPs. Those are exact counts from the specification records. The LX ULTRA's FP32 throughput is listed at 24.58 TFLOPS, while the Intel part is listed at 307.2 GFLOPS. That is a 79-fold difference in raw floating-point math, derived directly from the recorded values (24.58 TFLOPS divided by 0.3072 TFLOPS equals approximately 80). The pixel rate tells a similar story: 192.0 GPixel/s for the LX ULTRA versus 4.800 GPixel/s for the Intel part, a 40-fold gap. Texture rate is 384.0 GTexel/s versus 9.600 GTexel/s, a 40-fold gap as well.

These are not close products. The benchmark database has no direct measurements to confirm how those specifications translate into application performance, but the recorded hardware parameters indicate that the LX ULTRA operates in a different performance class entirely. The Intel part is an integrated graphics processor with system-shared memory and a 15 W TDP. The LX ULTRA is a dual-slot discrete card with 24 GB of dedicated GDDR6 memory and a 225 W TDP. The power envelope alone, 15 W versus 225 W, is a 15-fold difference in the recorded thermal design power.

FAQ

Q: Does the database show any benchmark win for either GPU in a head-to-head test?

A: No. The head-to-head benchmark array is empty for both products, and the wins counter shows zero for each side. No measured performance data exists in the database for either GPU.

Q: What is the memory configuration difference between the two?

A: The Intel UHD Graphics 710 Mobile uses system-shared memory with a system-dependent bandwidth and no dedicated VRAM. The Lisuan Tech LX ULTRA has 24 GB of GDDR6 memory on a 192-bit bus with 432.0 GB/s bandwidth and a memory clock of 2250 MHz (18 Gbps effective).

Q: How do the shading unit counts compare?

A: The Intel part has 128 shading units. The Lisuan Tech LX ULTRA has 6144 shading units, which is 48 times more by direct division of the recorded values.

Q: What API support does each GPU offer?

A: The Intel UHD Graphics 710 Mobile supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. The Lisuan Tech LX ULTRA supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.3.

Q: What are the physical dimensions of the LX ULTRA?

A: The Lisuan Tech LX ULTRA measures 268 mm in length, 112 mm in height, and 40 mm in width, with a dual-slot profile. The Intel part is listed as an IGP with no recorded dimensions.

Q: Is there any clock speed data for the LX ULTRA?

A: No. The base and boost clocks for the Lisuan Tech LX ULTRA are both null in the database. Only the memory clock is recorded at 2250 MHz. The Intel part has a base clock of 300 MHz and a boost clock of 1200 MHz.

Architecture Differences

The two GPUs come from fundamentally different design lineages. The Intel UHD Graphics 710 Mobile is built on Raptor Lake silicon using Intel's Generation 12.2 architecture, fabricated on a 10 nm process at Intel's own foundry. It belongs to the HD Graphics-M (Raptor Lake) generation and uses a Ring Bus interface. Its successor is listed as Arc Graphics-M, indicating it sits at the lower end of Intel's integrated graphics stack.

The Lisuan Tech LX ULTRA is built around a chip designated 7G105, using an architecture called TrueGPU, belonging to the 7G100 generation. It is fabricated on a 6 nm process at TSMC. The transistor count and die size are listed as unknown, so no density calculations can be made. The bus interface is PCIe 4.0 x16, a discrete card connection standard, rather than the Ring Bus used by the Intel IGP.

The memory architecture differs fundamentally. The Intel part shares system memory, with no dedicated VRAM, no fixed bus width, and bandwidth dependent on the host system. The LX ULTRA has a fixed memory subsystem: 24 GB of GDDR6 on a 192-bit bus with 432.0 GB/s bandwidth. This affects how each GPU accesses data. Integrated graphics contend with the CPU for memory bandwidth, while the discrete card has dedicated high-speed VRAM.

The rendering pipelines also diverge. The Intel part has 128 shading units, 8 TMUs, and 4 ROPs. The LX ULTRA has 6144 shading units, 192 TMUs, and 96 ROPs. Neither product lists ray tracing cores or tensor cores in the database, so those features cannot be compared. The FP16 performance ratio is 2:1 for both, with the Intel part at 614.4 GFLOPS and the LX ULTRA at 49.15 TFLOPS. API support differs slightly: the Intel part reaches Vulkan 1.4 and DirectX 12_1, while the LX ULTRA supports DirectX 12 Ultimate (12_2) and Vulkan 1.3.

The Intel part is an IGP with no slot width, no power connectors, and display outputs dependent on the portable device. The LX ULTRA is a dual-slot card with a single 16-pin power connector, a suggested 550 W power supply, and four DisplayPort 1.4a outputs.

Specification Differences

The database records distinct values for nearly every specification category between these two GPUs.

Process node: Intel uses 10 nm; Lisuan uses 6 nm. Foundry: Intel fabricates its own chip; Lisuan uses TSMC.

Clock speeds: Intel lists a base clock of 300 MHz and boost of 1200 MHz. Lisuan lists no base or boost clocks at all. Memory clock: Intel has no dedicated memory clock; Lisuan lists 2250 MHz (18 Gbps effective).

Memory: Intel has system-shared size, type, and bus width, with system-dependent bandwidth. Lisuan has 24 GB GDDR6, 192-bit bus, 432.0 GB/s bandwidth.

Compute units: Intel has 128 shading units, 8 TMUs, 4 ROPs. Lisuan has 6144 shading units, 192 TMUs, 96 ROPs.

Throughput: Intel pixel rate is 4.800 GPixel/s, texture rate 9.600 GTexel/s, FP32 307.2 GFLOPS, FP16 614.4 GFLOPS. Lisuan pixel rate is 192.0 GPixel/s, texture rate 384.0 GTexel/s, FP32 24.58 TFLOPS, FP16 49.15 TFLOPS.

Power: Intel TDP is 15 W. Lisuan TDP is 225 W.

Slot and power: Intel is an IGP with no connectors. Lisuan is dual-slot, uses 1x 16-pin, and suggests a 550 W PSU.

Bus interface: Intel uses Ring Bus. Lisuan uses PCIe 4.0 x16.

Display outputs: Intel is portable-device dependent. Lisuan has 4x DisplayPort 1.4a.

APIs: Intel supports DirectX 12 (12_1), OpenGL 4.6, Vulkan 1.4. Lisuan supports DirectX 12 Ultimate (12_2), OpenGL 4.6, Vulkan 1.3.

Dimensions: Intel has none recorded. Lisuan is 268 mm x 112 mm x 40 mm.

Release date: Intel released on 2023-01-03. Lisuan released on 2026-03-16.

Production status: Both are listed as Active.

The Verdict

The recorded data does not support a performance verdict based on measured benchmarks, because no benchmark scores exist for either GPU. However, the specification records provide a clear structural picture. The Intel UHD Graphics 710 Mobile is an integrated part designed for portable devices, with a 15 W TDP, system-shared memory, and modest compute resources. The Lisuan Tech LX ULTRA is a discrete, dual-slot card with a 225 W TDP, 24 GB of dedicated GDDR6, and compute resources that exceed the Intel part by orders of magnitude in every recorded throughput metric.

The FP32 gap is the most telling: 307.2 GFLOPS versus 24.58 TFLOPS. The pixel rate gap is 4.800 GPixel/s versus 192.0 GPixel/s. The texture rate gap is 9.600 GTexel/s versus 384.0 GTexel/s. These are not incremental differences. They represent different product categories.

The Intel part fits systems where power draw is minimal and space is constrained. The LX ULTRA fits systems with a dual-slot chassis, a 550 W power supply recommendation, and a 16-pin power connector. The LX ULTRA also requires a PCIe 4.0 x16 slot, while the Intel part uses a Ring Bus and requires no slot at all.

The release dates place the Intel part in early 2023 and the Lisuan part in early 2026. The Intel part has a known successor, Arc Graphics-M, while the Lisuan part has no successor listed. The production status for both is Active.

Where Each One Wins

For integrated graphics duty in a portable device, the Intel UHD Graphics 710 Mobile is the only viable option between the two. Its IGP form factor, 15 W TDP, Ring Bus interface, and portable-device-dependent display outputs match low-power mobile systems. Its 128 shading units and 307.2 GFLOPS of FP32 throughput are sufficient for basic display output and light graphical workloads, though the database records no benchmarks to quantify that capability. The 300 MHz base clock and 1200 MHz boost clock are the only clock data available for either GPU.

For discrete, high-throughput rendering, the Lisuan Tech LX ULTRA wins on every recorded compute metric. Its 6144 shading units, 192 TMUs, and 96 ROPs provide the hardware resources for demanding graphical tasks. The 24 GB GDDR6 frame buffer with 432.0 GB/s bandwidth supports large textures and datasets. The 24.58 TFLOPS FP32 rate and 49.15 TFLOPS FP16 rate place it in a higher compute class entirely. The 192.0 GPixel/s pixel rate and 384.0 GTexel/s texture rate are 40 times the Intel part's recorded values.

The LX ULTRA also wins on display connectivity, with four DisplayPort 1.4a outputs versus the Intel part's device-dependent outputs. It supports DirectX 12 Ultimate (12_2), a newer DirectX feature level than the Intel part's DirectX 12 (12_1). The LX ULTRA has a higher Vulkan version in the Intel part's favor, 1.4 versus 1.3, but the DirectX feature level favors the Lisuan card.

The power and physical requirements separate the use cases. The Intel part consumes 15 W and occupies no slot. The LX ULTRA consumes 225 W, occupies a dual-slot profile, measures 268 mm in length, and requires a 16-pin power connector plus a suggested 550 W power supply. Systems without that power delivery and physical space cannot accommodate the LX ULTRA. Systems requiring a discrete card cannot use the Intel IGP. The database shows two products with no overlapping benchmark results, but the specification records define distinct deployment scenarios.