AMD Radeon RX 9050 vs NVIDIA GeForce RTX 5090 D V2 Comparison

AMD
RADEON

AMD Radeon RX 9050

CORE STATE Navi 44
VRAM 8 GB
CLOCK SPEED 2600 MHz
TDP 92 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5090 D V2

CORE STATE GB202
VRAM 24 GB
CLOCK SPEED 2407 MHz
TDP 575 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
16,504

Analysis: AMD Radeon RX 9050 vs NVIDIA GeForce RTX 5090 D V2

AMD Radeon RX 9050 and NVIDIA GeForce RTX 5090 D V2 occupy opposite ends of the GPU spectrum, and the recorded data makes that distinction clear. The RTX 5090 D V2 is a 575 W flagship with 24 GB of GDDR7 memory and a 104.8 TFLOPS FP32 throughput, while the RX 9050 is a 92 W entry-level part with 8 GB of GDDR6 and 10.65 TFLOPS. Their benchmark percentile rankings confirm the gap: the RTX 5090 D V2 sits at the 59th percentile against all GPUs, while the RX 9050 sits at the 50th percentile, though the RTX 5090 D V2 has a recorded average benchmark score of 16504 in 3DMark Steel Nomad DX12, and the RX 9050 has no benchmark entries in the database. This analysis covers the architectural split, specification differences, and the head-to-head evidence available.

FAQ

Q: Which GPU has the higher transistor count?

A: The NVIDIA GeForce RTX 5090 D V2 uses 92,200 million transistors on a 750 mm² die, while the AMD Radeon RX 9050 uses 29,700 million transistors on a 199 mm² die. The RTX 5090 D V2 has roughly three times the transistor count but a lower transistor density (122.9M per mm² versus 149.2M per mm²).

Q: What are the memory configurations of these two cards?

A: The RX 9050 has 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth. The RTX 5090 D V2 has 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth. The RTX 5090 D V2 offers three times the capacity and over four times the bandwidth.

Q: How do their FP32 compute performances compare?

A: The RTX 5090 D V2 delivers 104.8 TFLOPS of FP32 compute, while the RX 9050 delivers 10.65 TFLOPS. That is a factor of roughly 9.8 in favor of the NVIDIA card, based on the recorded figures.

Q: Do both cards support the same graphics APIs?

A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. They also both use a PCIe 5.0 x16 bus interface.

Q: What is the power requirement difference?

A: The RX 9050 has a TDP of 92 W and a suggested PSU of 250 W, requiring a single 8-pin connector. The RTX 5090 D V2 has a TDP of 575 W and a suggested PSU of 950 W, requiring a single 16-pin connector.

Q: Which card has more shading units?

A: The RTX 5090 D V2 has 21760 shading units, 680 texture mapping units, and 176 ROPs. The RX 9050 has 1024 shading units, 64 TMUs, and 64 ROPs. The NVIDIA card has over 21 times more shading units.

Architecture Differences

The architecture divide is fundamental. The AMD Radeon RX 9050 uses the Navi 44 chip built on RDNA 4.0, fabricated on a 4 nm process at TSMC. It belongs to the Navi IV (RX 9000) generation and succeeds the Navi III architecture. The NVIDIA GeForce RTX 5090 D V2 uses the GB202 chip built on Blackwell 2.0, fabricated on a 5 nm process at TSMC. It belongs to the GeForce 50 generation and succeeds the GeForce 40 series; its successor is listed as GeForce 60.

The process node difference matters: 4 nm versus 5 nm, though both are TSMC fabs. The RX 9050 achieves a higher transistor density (149.2M per mm²) than the RTX 5090 D V2 (122.9M per mm²), which reflects the smaller die and newer node. However, the RTX 5090 D V2's die is 750 mm² versus 199 mm², giving it far more absolute transistor count.

Compute architecture differs sharply. The RX 9050 has 1024 shading units, 64 TMUs, and 64 ROPs, with 16 ray tracing cores and no tensor cores listed. The RTX 5090 D V2 has 21760 shading units, 680 TMUs, and 176 ROPs, with 170 ray tracing cores and 680 tensor cores. The tensor core presence is exclusive to NVIDIA, which supports its AI-focused feature set.

Clock behavior also diverges. The RX 9050 has a base clock of 1330 MHz, a game clock of 1920 MHz, and a boost clock of 2600 MHz. The RTX 5090 D V2 has a base clock of 2017 MHz and a boost clock of 2407 MHz, with no game clock listed. The AMD card boosts higher, but the NVIDIA card starts from a much higher base.

Memory architecture is entirely different: 8 GB GDDR6 on a 128-bit bus (288.0 GB/s) for AMD versus 24 GB GDDR7 on a 384-bit bus (1.34 TB/s) for NVIDIA. The memory clock figures are 2250 MHz (18 Gbps effective) for AMD and 1750 MHz (28 Gbps effective) for NVIDIA, with the effective rate favoring NVIDIA.

Both cards are dual-slot, use PCIe 5.0 x16, and support identical API sets. Power delivery differs: the RX 9050 uses a single 8-pin connector with a 92 W TDP, while the RTX 5090 D V2 uses a single 16-pin connector with a 575 W TDP. The suggested PSU scales accordingly: 250 W versus 950 W.

Display outputs are similar but not identical: the RX 9050 has 1x HDMI 2.1b and 2x DisplayPort 2.1a, while the RTX 5090 D V2 has 1x HDMI 2.1b and 3x DisplayPort 2.1b. The NVIDIA card adds one more DisplayPort and uses the newer 2.1b standard.

The Verdict

The data points to a clear verdict: the RTX 5090 D V2 is the overwhelmingly faster GPU, while the RX 9050 is a low-power, low-cost entry point. In the only recorded benchmark, 3DMark Steel Nomad DX12, the RTX 5090 D V2 scores 16504. The RX 9050 has no benchmark scores in the database, so direct head-to-head numbers are absent. The RTX 5090 D V2's nearest rivals in that benchmark are the NVIDIA T400 (16508, 0% delta), AMD Radeon PRO W7500 (16415, 0.5% slower), NVIDIA RTX PRO 6000 Blackwell (16408, 0.6% slower), and AMD Radeon RX 5700 XT (16361, 0.9% slower). These deltas are tiny, meaning the RTX 5090 D V2 effectively matches those cards in this specific test, despite its massive specification lead over the RX 9050.

The RX 9050 is positioned for users who need a PCIe 5.0 card with modern API support, a 92 W TDP, and a single 8-pin power connector. Its 8 GB memory and 288.0 GB/s bandwidth are modest, and its 10.65 TFLOPS FP32 is a fraction of the NVIDIA card's output. The RTX 5090 D V2 is for users who need maximum compute, 24 GB of GDDR7, and 1.34 TB/s bandwidth, accepting a 575 W TDP and a 950 W suggested PSU.

The release dates show a sequencing: the RTX 5090 D V2 launched on 2025-08-14, while the RX 9050 launched on 2026-07-27, nearly a year later. Both are listed as Active in production status. The RTX 5090 D V2 has a launch MSRP of 2,299 USD, while the RX 9050 has no launch MSRP in the database.

For most compute-heavy workloads, the RTX 5090 D V2 is the choice based on the recorded data. For low-power or compact systems where a 92 W TDP and 250 W PSU are constraints, the RX 9050 fits. The benchmark evidence, sparse as it is, only supports the NVIDIA card's performance tier.

Specification Differences

The specification table shows every field where the two cards differ:

  • Chip: Navi 44 versus GB202
  • Architecture: RDNA 4.0 versus Blackwell 2.0
  • Process node: 4 nm versus 5 nm
  • Transistors: 29,700 million versus 92,200 million
  • Die size: 199 mm² versus 750 mm²
  • Transistor density: 149.2M per mm² versus 122.9M per mm²
  • Base clock: 1330 MHz versus 2017 MHz
  • Boost clock: 2600 MHz versus 2407 MHz
  • Game clock: 1920 MHz (AMD only; NVIDIA has none)
  • Memory clock: 2250 MHz 18 Gbps effective versus 1750 MHz 28 Gbps effective
  • Memory size: 8 GB versus 24 GB
  • Memory type: GDDR6 versus GDDR7
  • Memory bus width: 128 bit versus 384 bit
  • Memory bandwidth: 288.0 GB/s versus 1.34 TB/s
  • Shading units: 1024 versus 21760
  • TMUs: 64 versus 680
  • ROPs: 64 versus 176
  • Ray tracing cores: 16 versus 170
  • Tensor cores: None versus 680
  • Pixel rate: 166.4 GPixel/s versus 423.6 GPixel/s
  • Texture rate: 166.4 GTexel/s versus 1,636.8 GTexel/s
  • FP32: 10.65 TFLOPS versus 104.8 TFLOPS
  • FP16: 10.65 TFLOPS (1:1) versus 104.8 TFLOPS (1:1)
  • TDP: 92 W versus 575 W
  • Power connector: 1x 8-pin versus 1x 16-pin
  • Suggested PSU: 250 W versus 950 W
  • Display outputs: 1x HDMI 2.1b, 2x DP 2.1a versus 1x HDMI 2.1b, 3x DP 2.1b
  • Dimensions: None listed for AMD; 304 mm length, 137 mm height, 48 mm width for NVIDIA
  • Release date: 2026-07-27 versus 2025-08-14
  • Predecessor: Navi III versus GeForce 40
  • Successor: None versus GeForce 60
  • Launch MSRP: None versus 2,299 USD

Identical fields include PCIe 5.0 x16 bus interface, dual-slot design, DirectX 12 Ultimate (12_2), OpenGL 4.6, Vulkan 1.4, and Active production status.

Head-to-Head Benchmarks

The database contains no direct head-to-head benchmark entries for these two cards. The winsA and winsB counts are both zero. However, the RTX 5090 D V2 has a single benchmark result: 3DMark Steel Nomad DX12 with a score of 16504. The RX 9050 has no benchmark scores at all, meaning no comparison can be made directly.

The RTX 5090 D V2's nearest rivals provide context for its score. The NVIDIA T400 scores 16508, a 0% delta, making the two effectively identical in this test. The AMD Radeon PRO W7500 scores 16415, which is 0.5% lower. The NVIDIA RTX PRO 6000 Blackwell scores 16408, 0.6% lower. The AMD Radeon RX 5700 XT scores 16361, 0.9% lower. These deltas are all within 1%, indicating that the RTX 5090 D V2 performs at parity with those cards in this specific DX12 workload, despite its far higher specification sheet.

The RX 9050 has no recorded data to compare. Its absence from the benchmark table means the only quantitative statement is that it has zero wins in any head-to-head test against the RTX 5090 D V2, and the RTX 5090 D V2 also has zero wins, because no such tests exist in the database.

Given the specification gap, the FP32 difference alone (10.65 versus 104.8 TFLOPS) suggests a 9.8x advantage for NVIDIA, and the texture rate difference (166.4 GTexel/s versus 1,636.8 GTexel/s) is a 9.8x advantage as well. The pixel rate difference is 2.5x (166.4 versus 423.6 GPixel/s). Memory bandwidth is 4.7x higher on the NVIDIA card (1.34 TB/s versus 288.0 GB/s). These are the largest measured deltas available, even though they are not from direct benchmark runs.

Where Each One Wins

The RTX 5090 D V2 wins in every performance category that has recorded data. It has higher FP32 and FP16 compute (104.8 TFLOPS versus 10.65 TFLOPS), higher pixel rate (423.6 GPixel/s versus 166.4 GPixel/s), higher texture rate (1,636.8 GTexel/s versus 166.4 GTexel/s), more memory (24 GB versus 8 GB), more bandwidth (1.34 TB/s versus 288.0 GB/s), more shading units (21760 versus 1024), more TMUs (680 versus 64), more ROPs (176 versus 64), more ray tracing cores (170 versus 16), and it has 680 tensor cores that the RX 9050 lacks entirely. Its benchmark score of 16504 in 3DMark Steel Nomad DX12 is the only measured performance data point, and it places the card at the 59th percentile versus all GPUs.

The RX 9050 wins in efficiency and physical footprint. It has a 92 W TDP versus 575 W, a suggested PSU of 250 W versus 950 W, and uses a single 8-pin connector instead of a 16-pin. Its die is 199 mm² versus 750 mm², and its transistor density is higher (149.2M per mm² versus 122.9M per mm²). It also has a higher boost clock (2600 MHz versus 2407 MHz) and a newer 4 nm process node versus 5 nm. No dimensions are listed for the RX 9050, while the RTX 5090 D V2 measures 304 mm by 137 mm by 48 mm.

The RX 9050's percentile ranking is 50th versus all GPUs, below the RTX 5090 D V2's 59th percentile. However, the RX 9050 has no average benchmark score, so its percentile is not backed by measured performance in the database.

For workloads that demand raw compute, high bandwidth, or large memory pools, the RTX 5090 D V2 is the only viable option between these two. For workloads that require low power draw, minimal PSU requirements, or a smaller physical card, the RX 9050 has the advantage. The data does not support any scenario where the RX 9050 outperforms the RTX 5090 D V2 in throughput metrics, because no such benchmark results exist.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9050
RTX 5090 D V2
Core Specs
Shading Units
1,024
21,760 +2025.0%
Shaders
1,024
21,760 +2025.0%
TMUs
64
680 +962.5%
ROPs
64
176 +175.0%
Compute Units
16
—
SM Count
—
170
Clocks
Base Clock
1330 MHz
2017 MHz
Boost Clock
2600 MHz
2407 MHz
Game Clock
1920 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
8 GB
24 GB
VRAM (MB)
8,192
24,576 +200.0%
Memory Type
GDDR6
GDDR7
Memory Bus
128 bit
384 bit
Bandwidth
288.0 GB/s
1.34 TB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
4 MB
96 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
166.4 GPixel/s
423.6 GPixel/s
Texture Rate
166.4 GTexel/s
1,636.8 GTexel/s
FP32 (TFLOPS)
10.65 TFLOPS
104.8 TFLOPS
FP64 (TFLOPS)
332.8 GFLOPS (1:32)
1.637 TFLOPS (1:64)
FP16 (TFLOPS)
10.65 TFLOPS (1:1)
104.8 TFLOPS (1:1)
AI/RT
RT Cores
16
170 +962.5%
Tensor Cores
—
680
Matrix Cores
32
—
Power
TDP
92 W
575 W
TDP (W)
92
575 +525.0%
Suggested PSU
250 W
950 W
Power Connectors
1x 8-pin
1x 16-pin
Architecture
Architecture
RDNA 4.0
Blackwell 2.0
GPU Name
Navi 44
GB202
Generation
Navi IV (RX 9000)
GeForce 50
Process Size
4 nm
5 nm
Transistors
29,700 million
92,200 million
Die Size
199 mm²
750 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
122.9M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
Dual-slot
Dual-slot
Length
—
304 mm 12 inches
Height
—
137 mm 5.4 inches
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x16
Other
Launch Price
—
2,299 USD
Production
Active
Active
Predecessor
Navi III
GeForce 40
Successor
—
GeForce 60
View Radeon RX 9050 Details View GeForce RTX 5090 D V2 Details