AMD Radeon RX 9050 vs NVIDIA GeForce RTX 5070 Mobile 12 GB Comparison

AMD
RADEON

AMD Radeon RX 9050

CORE STATE Navi 44
VRAM 8 GB
CLOCK SPEED 2600 MHz
TDP 92 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5070 Mobile 12 GB

CORE STATE GB206
VRAM 12 GB
CLOCK SPEED 1425 MHz
TDP 50 W
BUS WIDTH 192 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2026

Analysis: AMD Radeon RX 9050 vs NVIDIA GeForce RTX 5070 Mobile 12 GB

Head-to-Head Benchmarks

The recorded database does not contain any head-to-head benchmark entries for the AMD Radeon RX 9050 versus the NVIDIA GeForce RTX 5070 Mobile 12 GB. There are no wins attributed to either side, and no benchmark scores are listed for either product. The average benchmark score for both parts is zero, which means the database has not yet accumulated comparative performance measurements for this pairing.

Without direct benchmark results, the analysis must rely on the underlying hardware specifications to infer relative performance. The data shows a clear split in design priorities between the two GPUs. The AMD Radeon RX 9050 uses a smaller memory configuration with 8 GB of GDDR6 on a 128-bit bus, delivering 288.0 GB/s of bandwidth. The NVIDIA GeForce RTX 5070 Mobile 12 GB uses 12 GB of GDDR7 on a 192-bit bus, delivering 576.0 GB/s of bandwidth. That is exactly double the memory bandwidth of the AMD part, a significant advantage for bandwidth-sensitive workloads.

In raw shader throughput, the NVIDIA part delivers 13.13 TFLOPS of FP32 compute, while the AMD part delivers 10.65 TFLOPS. The NVIDIA GPU is approximately 23% ahead in FP32 throughput based on these figures. However, the AMD card shows a higher pixel fill rate at 166.4 GPixel/s compared to 68.40 GPixel/s for the NVIDIA part. The AMD GPU achieves roughly 2.4 times the pixel throughput, which indicates a very different rendering pipeline balance.

Texture rate favors the NVIDIA GPU, with 205.2 GTexel/s versus 166.4 GTexel/s for the AMD part. This reflects the NVIDIA GPU's larger complement of texture mapping units, 144 versus 64. The AMD GPU compensates with a higher clock speed profile, running at a boost of 2600 MHz compared to 1425 MHz for the NVIDIA part.

Architecture Differences

The two GPUs come from different architectural generations and manufacturing processes. The AMD Radeon RX 9050 uses the Navi 44 chip built on RDNA 4.0 architecture, produced on a 4 nm process at TSMC. The NVIDIA GeForce RTX 5070 Mobile 12 GB uses the GB206 chip built on Blackwell 2.0 architecture, produced on a 5 nm process, also at TSMC. The AMD chip packs 29,700 million transistors into a 199 mm² die, yielding a transistor density of 149.2M per mm². The NVIDIA chip contains 21,900 million transistors on a 181 mm² die, for a density of 121.0M per mm². The AMD GPU therefore has roughly 36% more transistors and about 10% larger die area, with a higher packing density.

The shading unit counts differ substantially. The AMD GPU has 1,024 shading units, 64 TMUs, and 64 ROPs. The NVIDIA GPU has 4,608 shading units, 144 TMUs, and 48 ROPs. The NVIDIA part has 4.5 times the shader count, which explains its higher FP32 throughput despite a lower clock speed. The AMD part has more ROPs, which explains its higher pixel fill rate.

Ray tracing hardware also differs. The AMD GPU includes 16 ray accelerators (listed as RT cores), while the NVIDIA GPU includes 36 RT cores. For AI acceleration, the NVIDIA GPU includes 144 tensor cores, while the AMD part lists no tensor core count in the database. The NVIDIA GPU is therefore the only one of the two with dedicated tensor hardware.

Memory technology and configuration are major differentiators. The AMD GPU uses GDDR6 running at 2250 MHz with 18 Gbps effective speed, while the NVIDIA GPU uses GDDR7 at 1500 MHz with 24 Gbps effective speed. The AMD part has 8 GB of memory, the NVIDIA part has 12 GB. The bus widths are 128-bit and 192-bit respectively. The resulting bandwidth gap is substantial, with the NVIDIA part delivering 576.0 GB/s versus 288.0 GB/s for the AMD part.

Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Both use a PCIe 5.0 x16 bus interface. The AMD GPU offers display outputs of 1x HDMI 2.1b and 2x DisplayPort 2.1a, while the NVIDIA mobile part has display outputs described as portable device dependent.

FAQ

Q: Which GPU has higher memory bandwidth?

A: The NVIDIA GeForce RTX 5070 Mobile 12 GB delivers 576.0 GB/s, exactly double the 288.0 GB/s of the AMD Radeon RX 9050.

Q: What are the transistor counts of these two GPUs?

A: The AMD Radeon RX 9050 has 29,700 million transistors on a 199 mm² die. The NVIDIA GeForce RTX 5070 Mobile 12 GB has 21,900 million transistors on a 181 mm² die.

Q: Which GPU has more shading units?

A: The NVIDIA GeForce RTX 5070 Mobile 12 GB has 4,608 shading units, compared to 1,024 on the AMD Radeon RX 9050.

Q: What is the pixel fill rate difference?

A: The AMD Radeon RX 9050 achieves 166.4 GPixel/s, while the NVIDIA GeForce RTX 5070 Mobile 12 GB achieves 68.40 GPixel/s. The AMD part is roughly 2.4 times faster in this metric.

Q: Do both GPUs support the same APIs?

A: Yes, both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: What is the power draw of each GPU?

A: The AMD Radeon RX 9050 has a TDP of 92 W, while the NVIDIA GeForce RTX 5070 Mobile 12 GB has a TDP of 50 W.

Specification Differences

The database lists several fields where the two GPUs differ. The process node is 4 nm for the AMD part and 5 nm for the NVIDIA part. Transistor count is 29,700 million versus 21,900 million. Die size is 199 mm² versus 181 mm². Transistor density is 149.2M per mm² versus 121.0M per mm².

Base clock speeds are 1330 MHz for the AMD GPU and 907 MHz for the NVIDIA GPU. Boost clocks are 2600 MHz versus 1425 MHz. The AMD GPU has a listed game clock of 1920 MHz, while the NVIDIA part has no game clock listed. Memory clocks are 2250 MHz (18 Gbps effective) for AMD and 1500 MHz (24 Gbps effective) for NVIDIA.

Memory configuration differs in size (8 GB versus 12 GB), type (GDDR6 versus GDDR7), bus width (128-bit versus 192-bit), and bandwidth (288.0 GB/s versus 576.0 GB/s). Shading units are 1,024 versus 4,608. TMUs are 64 versus 144. ROPs are 64 versus 48. RT cores are 16 versus 36. The NVIDIA part has 144 tensor cores, while the AMD part has none listed.

Pixel rate is 166.4 GPixel/s versus 68.40 GPixel/s. Texture rate is 166.4 GTexel/s versus 205.2 GTexel/s. FP32 compute is 10.65 TFLOPS versus 13.13 TFLOPS. FP16 performance is 10.65 TFLOPS (1:1) for AMD and 13.13 TFLOPS (1:1) for NVIDIA.

TDP is 92 W for the AMD GPU and 50 W for the NVIDIA GPU. Slot width is dual-slot for AMD and IGP for NVIDIA. Power connectors are listed as 1x 8-pin for AMD and none for NVIDIA. The suggested PSU is 250 W for the AMD part, with no value listed for the NVIDIA part. Display outputs are 1x HDMI 2.1b and 2x DisplayPort 2.1a for AMD, versus portable device dependent for NVIDIA. Release dates are 2026-07-27 for AMD and 2026-05-31 for NVIDIA. The AMD predecessor is Navi III, and the NVIDIA predecessor is GeForce 40 Mobile. Both are listed as active production.

Where Each One Wins

Based on the specification data, the AMD Radeon RX 9050 wins in pixel fill rate. Its 166.4 GPixel/s output benefits rasterization-heavy workloads where pixel throughput is the limiting factor. The higher ROP count of 64, combined with a boost clock of 2600 MHz, drives this advantage. The AMD GPU also has a much lower power draw relative to its pixel throughput, with a 92 W TDP. It uses a dual-slot design with a single 8-pin power connector, which makes it a self-contained desktop component.

The AMD GPU also wins on transistor density, packing 149.2M transistors per mm², which indicates a denser design on a newer 4 nm process. The higher boost clock of 2600 MHz gives it an advantage in clock-sensitive workloads, and the larger die at 199 mm² provides more physical resources for its architecture.

The NVIDIA GeForce RTX 5070 Mobile 12 GB wins in compute throughput. Its 13.13 TFLOPS FP32 performance is ahead of the AMD part's 10.65 TFLOPS. The 4,608 shading units give it a decisive advantage in shader-bound workloads, and the 144 tensor cores provide dedicated AI acceleration that the AMD part lacks. The 36 RT cores double the AMD GPU's ray tracing hardware count.

The NVIDIA GPU also wins decisively in memory capacity and bandwidth. Its 12 GB of GDDR7 on a 192-bit bus provides 576.0 GB/s, exactly double the AMD GPU's bandwidth. The 12 GB capacity is 50% larger than the AMD GPU's 8 GB, which matters for large textures and data sets. The NVIDIA part also has a much lower TDP at 50 W, less than the AMD GPU's 92 W, and uses no power connectors, reflecting its integrated mobile design.

The NVIDIA GPU wins on texture rate with 205.2 GTexel/s versus 166.4 GTexel/s for the AMD part. This comes from its 144 TMUs, more than double the AMD GPU's 64 TMUs. The AMD GPU wins on ROP count with 64 versus 48, which supports its pixel rate advantage.

The Verdict

The data describes two GPUs with fundamentally different design goals. The AMD Radeon RX 9050 is a desktop-oriented part with a 92 W TDP, dual-slot cooler, and a 250 W suggested PSU. It prioritizes pixel throughput and clock speed, with a 2600 MHz boost and 166.4 GPixel/s fill rate. Its 8 GB GDDR6 memory and 288.0 GB/s bandwidth are modest by current standards, but its 4 nm process and 29,700 million transistors indicate a modern, dense design.

The NVIDIA GeForce RTX 5070 Mobile 12 GB is a mobile integrated part with a 50 W TDP and no power connectors. It prioritizes compute and bandwidth, with 13.13 TFLOPS FP32, 4,608 shading units, and 576.0 GB/s of GDDR7 bandwidth. Its 12 GB memory capacity and 144 tensor cores make it suited for AI and memory-intensive tasks. The 36 RT cores give it a ray tracing hardware advantage.

Users who need maximum pixel throughput, higher clock speeds, or a desktop expansion card format should select the AMD Radeon RX 9050. Its 166.4 GPixel/s pixel rate and 2600 MHz boost clock are the highest in this comparison. Users who need compute throughput, memory bandwidth, AI acceleration, or mobile integration should select the NVIDIA GeForce RTX 5070 Mobile 12 GB. Its 13.13 TFLOPS compute, 576.0 GB/s bandwidth, 144 tensor cores, and 50 W TDP define its profile.

The absence of benchmark data means these conclusions come from specification analysis alone. The percentile ranking for both GPUs is 50, indicating the database currently places them at the midpoint of all GPUs, but no comparative performance scores have been recorded. The choice between them depends on whether the workload favors the AMD GPU's rasterization strengths or the NVIDIA GPU's compute and bandwidth advantages.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9050
RTX 5070 Mobile 12 GB
Core Specs
Shading Units
1,024
4,608 +350.0%
Shaders
1,024
4,608 +350.0%
TMUs
64
144 +125.0%
ROPs
64
48 -25.0%
Compute Units
16
—
SM Count
—
36
Clocks
Base Clock
1330 MHz
907 MHz
Boost Clock
2600 MHz
1425 MHz
Game Clock
1920 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
1500 MHz 24 Gbps effective
Memory
Memory Size
8 GB
12 GB
VRAM (MB)
8,192
12,288 +50.0%
Memory Type
GDDR6
GDDR7
Memory Bus
128 bit
192 bit
Bandwidth
288.0 GB/s
576.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
4 MB
32 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
166.4 GPixel/s
68.40 GPixel/s
Texture Rate
166.4 GTexel/s
205.2 GTexel/s
FP32 (TFLOPS)
10.65 TFLOPS
13.13 TFLOPS
FP64 (TFLOPS)
332.8 GFLOPS (1:32)
205.2 GFLOPS (1:64)
FP16 (TFLOPS)
10.65 TFLOPS (1:1)
13.13 TFLOPS (1:1)
AI/RT
RT Cores
16
36 +125.0%
Tensor Cores
—
144
Matrix Cores
32
—
Power
TDP
92 W
50 W
TDP (W)
92
50 -45.7%
Suggested PSU
250 W
—
Power Connectors
1x 8-pin
None
Architecture
Architecture
RDNA 4.0
Blackwell 2.0
GPU Name
Navi 44
GB206
Generation
Navi IV (RX 9000)
GeForce 50 Mobile
Process Size
4 nm
5 nm
Transistors
29,700 million
21,900 million
Die Size
199 mm²
181 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
121.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
Dual-slot
IGP
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
Portable Device Dependent
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x16
Other
Production
Active
Active
Predecessor
Navi III
GeForce 40 Mobile
View Radeon RX 9050 Details View GeForce RTX 5070 Mobile 12 GB Details