AMD Radeon RX 7400 OEM vs NVIDIA GeForce RTX 5090 SE Comparison

AMD
RADEON

AMD Radeon RX 7400 OEM

CORE STATE Navi 33
VRAM 8 GB
CLOCK SPEED 1100 MHz
TDP 55 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 3.0
nm
PROCESS 6 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 5090 SE

CORE STATE GB202
VRAM 24 GB
CLOCK SPEED 2377 MHz
TDP 500 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2026

Analysis: AMD Radeon RX 7400 OEM vs NVIDIA GeForce RTX 5090 SE

Head-to-Head Benchmarks

The recorded data for the AMD Radeon RX 7400 OEM and the NVIDIA GeForce RTX 5090 SE presents a stark contrast in almost every measurable metric. The RTX 5090 SE leads by overwhelming margins across raw compute, memory bandwidth, and rendering throughput, while the RX 7400 OEM counters with dramatically lower power consumption and a more compact physical footprint.

The most decisive separation appears in raw shading power. The RTX 5090 SE delivers 66.94 TFLOPS FP32 performance, compared to the RX 7400 OEM's 7.885 TFLOPS. That places the NVIDIA card roughly 8.5 times ahead in single-precision compute. The FP16 figures mirror this exactly, with both cards operating at a 1:1 ratio, meaning the RTX 5090 SE also produces 66.94 TFLOPS FP16 versus 7.885 TFLOPS on the AMD part. Texture throughput tells a similar story: the RTX 5090 SE reaches 1,045.9 GTexel/s against 123.2 GTexel/s for the RX 7400 OEM, a difference of roughly 8.5x. Pixel fill rates widen further, with the RTX 5090 SE achieving 380.3 GPixel/s compared to 70.40 GPixel/s on the RX 7400 OEM, a gap of about 5.4x.

Memory bandwidth presents one of the largest disparities. The RTX 5090 SE uses 24 GB of GDDR7 on a 384-bit bus, yielding 1.34 TB/s of bandwidth. The RX 7400 OEM pairs 8 GB of GDDR6 with a 128-bit bus for 172.8 GB/s. The NVIDIA card holds a 7.75x advantage in raw bandwidth, which directly impacts resolution scaling, texture streaming, and compute workloads that saturate memory. The memory clock difference compounds this: the RTX 5090 SE runs at 1750 MHz (28 Gbps effective) while the RX 7400 OEM operates at 1350 MHz (10.8 Gbps effective). Higher effective data rates per pin on the GDDR7 implementation contribute significantly to the bandwidth gap.

Clock speeds also favor the NVIDIA card substantially. The RTX 5090 SE has a base clock of 1740 MHz and a boost clock of 2377 MHz. The RX 7400 OEM starts at 330 MHz base and boosts to 1100 MHz. Even accounting for architectural differences, the NVIDIA part runs at more than double the boost frequency. The RX 7400 OEM's low clocks help explain its modest 55 W TDP, while the RTX 5090 SE consumes 500 W, a 9x power draw difference that tracks the performance scaling.

The RTX 5090 SE also carries far more hardware resources. It features 14,080 shading units, 440 TMUs, 160 ROPs, 110 RT cores, and 440 tensor cores. The RX 7400 OEM offers 1,792 shading units, 112 TMUs, 64 ROPs, and 28 RT cores, with no tensor cores listed. The NVIDIA card therefore has 7.9x the shading units, 3.9x the TMUs, 2.5x the ROPs, and 3.9x the RT cores. The tensor core count, exclusive to the NVIDIA part, enables AI-accelerated features that the AMD card cannot match through dedicated hardware.

The Verdict

The data indicates a total mismatch in class. The RTX 5090 SE is positioned as a top-tier enthusiast card with active production status, a dual-slot cooler, and a 900 W suggested power supply. The RX 7400 OEM is a single-slot, 55 W part designed for low-power or OEM systems. The RTX 5090 SE holds roughly an 8.5x lead in FP32 compute and texture rate, a 7.75x lead in memory bandwidth, and a 5.4x lead in pixel fill. These are not incremental differences; they represent entirely different performance tiers.

The RX 7400 OEM does not win a single head-to-head benchmark category in the recorded data. Its only advantages are practical rather than performance-based: lower power draw, smaller physical size, and a simpler power connector requirement. The RTX 5090 SE requires a 16-pin connector and a 900 W PSU, while the RX 7400 OEM uses a single 6-pin connector with a 250 W suggested PSU. The AMD card also fits in a 167 mm length versus 267 mm for the NVIDIA card, making it suitable for small-form-factor builds.

For users constrained by power budgets, chassis space, or PCIe slot availability, the RX 7400 OEM offers a viable low-profile option. For anyone seeking maximum compute, memory throughput, or AI-related features, the RTX 5090 SE is the only choice based on the recorded specifications. The RTX 5090 SE also supports PCIe 5.0 x16, while the RX 7400 OEM uses PCIe 4.0 x8, halving the available lanes and using an older bus standard. The RTX 5090 SE's launch MSRP is 1,499 USD, which the database records, but no such figure exists for the RX 7400 OEM.

Where Each One Wins

The RTX 5090 SE wins in every performance category measured in the database. Its 66.94 TFLOPS FP32 and FP16 throughput makes it suited for heavy compute workloads, including scientific simulations, rendering, and high-end gaming at extreme resolutions. The 1.34 TB/s memory bandwidth supports large datasets and high-resolution textures without bottlenecking. The 440 tensor cores provide dedicated AI acceleration, a feature entirely absent from the RX 7400 OEM. The 110 RT cores offer substantially more ray tracing capability than the 28 on the AMD card. The 24 GB frame buffer allows for workloads that exceed 8 GB, such as multi-model inference or 4K texture packs.

The RX 7400 OEM wins on operational efficiency. Its 55 W TDP means it can run in systems with minimal cooling and modest power supplies. The 250 W suggested PSU requirement is far below the RTX 5090 SE's 900 W recommendation. The single-slot design and 167 mm length make it compatible with compact cases where the RTX 5090 SE's dual-slot, 267 mm footprint would not fit. The 6-pin power connector is universally available, whereas the 16-pin connector on the RTX 5090 SE may require adapter cables in older power supplies. The RX 7400 OEM also uses PCIe 4.0 x8, which is backward compatible with older motherboards, though bandwidth-limited compared to the RTX 5090 SE's PCIe 5.0 x16.

The RX 7400 OEM's 8 GB GDDR6 memory is sufficient for 1080p gaming and light productivity, but the 172.8 GB/s bandwidth constrains high-texture workloads. The RTX 5090 SE's 24 GB GDDR7 at 1.34 TB/s removes such constraints entirely. For users who prioritize low noise, low heat, and minimal power draw, the RX 7400 OEM delivers. For users who prioritize raw performance, the RTX 5090 SE has no competition in this pairing.

FAQ

Q: Which card has higher FP32 performance?

A: The RTX 5090 SE delivers 66.94 TFLOPS FP32, while the RX 7400 OEM provides 7.885 TFLOPS. The NVIDIA card is approximately 8.5 times faster in single-precision compute.

Q: What is the memory capacity and bandwidth difference?

A: The RTX 5090 SE has 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth. The RX 7400 OEM has 8 GB of GDDR6 on a 128-bit bus with 172.8 GB/s bandwidth. The NVIDIA card holds a 7.75x bandwidth advantage.

Q: Does the RX 7400 OEM have tensor cores?

A: No tensor core count is listed for the RX 7400 OEM. The RTX 5090 SE includes 440 tensor cores, which support AI-accelerated workloads.

Q: What are the power requirements for each card?

A: The RX 7400 OEM has a 55 W TDP with a 250 W suggested PSU and a single 6-pin connector. The RTX 5090 SE has a 500 W TDP with a 900 W suggested PSU and a single 16-pin connector.

Q: Which card supports newer PCIe generations?

A: The RTX 5090 SE uses PCIe 5.0 x16. The RX 7400 OEM uses PCIe 4.0 x8, which provides fewer lanes and an older bus standard.

Q: How do the physical dimensions compare?

A: The RX 7400 OEM is 167 mm long and single-slot. The RTX 5090 SE is 267 mm long, 111 mm tall, 40 mm wide, and dual-slot.

Architecture Differences

The two cards come from different architectural generations and process nodes. The RX 7400 OEM uses the Navi 33 chip built on RDNA 3.0, codenamed Hotpink Bonefish, fabricated on a 6 nm process at TSMC. The RTX 5090 SE uses the GB202 chip built on Blackwell 2.0, fabricated on a 5 nm process, also at TSMC. The process node difference is small but meaningful: the 5 nm node offers higher transistor density, recorded at 122.9M per mm² versus 65.2M per mm² for the 6 nm node.

Transistor counts diverge sharply. The RTX 5090 SE integrates 92,200 million transistors on a 750 mm² die. The RX 7400 OEM contains 13,300 million transistors on a 204 mm² die. The NVIDIA chip has nearly 7x more transistors and a 3.7x larger die area. This scale difference explains the performance gap, as the RTX 5090 SE packs far more compute units into a larger, more densely packed chip.

The memory subsystems reflect different design philosophies. The RX 7400 OEM uses GDDR6 at 10.8 Gbps effective, while the RTX 5090 SE uses GDDR7 at 28 Gbps effective. The newer GDDR7 standard delivers higher per-pin data rates, and the 384-bit bus on the NVIDIA card triples the bus width of the AMD part's 128-bit bus. The combination results in the 7.75x bandwidth advantage noted earlier.

The RTX 5090 SE includes 440 tensor cores, which are absent from the RX 7400 OEM's specification list. These tensor cores enable hardware-accelerated AI processing, including features like DLSS or similar neural network workloads. The RX 7400 OEM relies entirely on its 28 RT cores for ray tracing, while the RTX 5090 SE pairs 110 RT cores with 440 tensor cores for a more comprehensive feature set.

Both cards support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API compatibility is identical. Display outputs differ slightly: the RX 7400 OEM offers 1x HDMI 2.1a and 3x DisplayPort 2.1, while the RTX 5090 SE provides 1x HDMI 2.1b and 3x DisplayPort 2.1b. The newer revisions on the NVIDIA card support higher bandwidth display standards, though the practical difference depends on monitor capabilities.

The RTX 5090 SE is listed as Active in production status, while the RX 7400 OEM has no recorded production status. The release dates also differ, with the RX 7400 OEM dated August 7, 2025, and the RTX 5090 SE dated December 31, 2025. The RTX 5090 SE's successor is listed as GeForce 60, while the RX 7400 OEM's successor is Navi IV. Both cards list their predecessors as the prior generation (Navi II for AMD, GeForce 40 for NVIDIA), confirming their positions in consecutive hardware cycles.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 7400 OEM
RTX 5090 SE
Core Specs
Shading Units
1,792
14,080 +685.7%
Shaders
1,792
14,080 +685.7%
TMUs
112
440 +292.9%
ROPs
64
160 +150.0%
Compute Units
28
—
SM Count
—
110
Clocks
Base Clock
330 MHz
1740 MHz
Boost Clock
1100 MHz
2377 MHz
Memory Clock
1350 MHz 10.8 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
8 GB
24 GB
VRAM (MB)
8,192
24,576 +200.0%
Memory Type
GDDR6
GDDR7
Memory Bus
128 bit
384 bit
Bandwidth
172.8 GB/s
1.34 TB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
2 MB
96 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
70.40 GPixel/s
380.3 GPixel/s
Texture Rate
123.2 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
7.885 TFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
246.4 GFLOPS (1:32)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
7.885 TFLOPS (1:1)
66.94 TFLOPS (1:1)
AI/RT
RT Cores
28
110 +292.9%
Tensor Cores
—
440
Matrix Cores
56
—
Power
TDP
55 W
500 W
TDP (W)
55
500 +809.1%
Suggested PSU
250 W
900 W
Power Connectors
1x 6-pin
1x 16-pin
Architecture
Architecture
RDNA 3.0
Blackwell 2.0
GPU Name
Navi 33
GB202
Codename
Hotpink Bonefish
—
Generation
Navi III (RX 7000)
GeForce 50
Process Size
6 nm
5 nm
Transistors
13,300 million
92,200 million
Die Size
204 mm²
750 mm²
Foundry
TSMC
TSMC
Density
65.2M / mm²
122.9M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.9
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
167 mm 6.6 inches
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
1x HDMI 2.1a3x DisplayPort 2.1
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 4.0 x8
PCIe 5.0 x16
Other
Launch Price
—
1,499 USD
Production
—
Active
Predecessor
Navi II
GeForce 40
Successor
Navi IV
GeForce 60
View Radeon RX 7400 OEM Details View GeForce RTX 5090 SE Details