AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 4070 GDDR6 Comparison

AMD
RADEON

AMD Radeon RX 9050 OEM

CORE STATE Navi 44
VRAM 4 GB
CLOCK SPEED 2600 MHz
TDP 92 W
BUS WIDTH 64 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 4070 GDDR6

CORE STATE AD104
VRAM 12 GB
CLOCK SPEED 2475 MHz
TDP 200 W
BUS WIDTH 192 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
4,334.5

Analysis: AMD Radeon RX 9050 OEM vs NVIDIA GeForce RTX 4070 GDDR6

Head-to-Head Benchmarks

The recorded database contains no direct head-to-head benchmark entries for the AMD Radeon RX 9050 OEM versus the NVIDIA GeForce RTX 4070 GDDR6. The RX 9050 OEM has no benchmark scores listed, while the RTX 4070 GDDR6 carries a single 3DMark Steel Nomad DX12 result of 4334.5 points. With no shared test data, the comparison relies on architectural specifications and the one available measurement for the NVIDIA part.

The RTX 4070 GDDR6's 4334.5 score places it at the 25th percentile among all GPUs in the database. Its nearest rivals in the recorded data are all low-power or older mobile parts: the Intel Iris Pro Graphics 5200 scores 4360, which is 0.6% higher; the AMD FirePro W2100 scores 4295, which is 0.9% lower; the NVIDIA GeForce 930M scores 4388, which is 1.2% higher; and the NVIDIA GeForce GTX 460M scores 4282, which is 1.2% lower. This clustering indicates the RTX 4070 GDDR6's single recorded benchmark result sits in a narrow band around 4300 points, surrounded by integrated and legacy GPUs. The RX 9050 OEM has no percentile or average score listed, so no direct percentile comparison can be made.

Given the absence of head-to-head runs, the closest quantitative signal comes from compute and memory throughput figures. The RTX 4070 GDDR6 delivers 29.15 TFLOPS FP32, while the RX 9050 OEM delivers 10.65 TFLOPS FP32. The NVIDIA part holds a 2.7x advantage in raw FP32 throughput. Texture rate follows a similar pattern: the RTX 4070 GDDR6 reaches 455.4 GTexel/s versus 166.4 GTexel/s for the RX 9050 OEM, a 2.7x margin. Pixel rate is nearly even, with the RX 9050 OEM at 166.4 GPixel/s and the RTX 4070 GDDR6 at 158.4 GPixel/s, a 5% edge for the AMD part. This narrow pixel-rate difference contrasts with the wide gap in shading and texturing throughput.

Memory bandwidth is another decisive split. The RTX 4070 GDDR6 uses 12 GB of GDDR6 on a 192-bit bus, yielding 480.0 GB/s. The RX 9050 OEM uses 4 GB of GDDR6 on a 64-bit bus, yielding 144.0 GB/s. The NVIDIA card offers 3.3x the bandwidth and 3x the memory capacity. The RX 9050 OEM's memory operates at 2250 MHz (18 Gbps effective) versus 2500 MHz (20 Gbps effective) for the RTX 4070 GDDR6. Clock speeds favor the NVIDIA card at base (1920 MHz versus 1330 MHz) but the AMD card at boost (2600 MHz versus 2475 MHz). The RX 9050 OEM also lists a game clock of 1920 MHz, a figure not present for the RTX 4070 GDDR6.

Architecture Differences

The two GPUs come from different architectural generations and process nodes. The AMD Radeon RX 9050 OEM uses the Navi 44 chip built on RDNA 4.0, manufactured by TSMC on a 4 nm process. The NVIDIA GeForce RTX 4070 GDDR6 uses the AD104 chip built on Ada Lovelace, also manufactured by TSMC but on a 5 nm process. The 4 nm node gives the AMD part a denser transistor layout: 29,700 million transistors on a 199 mm² die, for a density of 149.2 million transistors per mm². The NVIDIA chip packs 35,800 million transistors on a 294 mm² die, for 121.8 million per mm². The RX 9050 OEM is smaller and denser, while the RTX 4070 GDDR6 has more total transistors and a larger physical area.

The RX 9050 OEM belongs to the Radeon RX 9000 series, generation Navi IV, with a predecessor in Navi III and no successor listed. The RTX 4070 GDDR6 belongs to the GeForce 40-series, with a predecessor in GeForce 30 and a successor in GeForce 50. The AMD card is marked as Active in production, while the NVIDIA card is marked as End-of-life. The RX 9050 OEM has no launch MSRP listed; the RTX 4070 GDDR6 has a launch MSRP of 599 USD.

Core configurations differ substantially. The RX 9050 OEM has 1024 shading units, 64 texture mapping units, 64 ROPs, and 16 ray tracing cores. The RTX 4070 GDDR6 has 5888 shading units, 184 texture mapping units, 64 ROPs, 46 ray tracing cores, and 184 tensor cores. The NVIDIA part carries 5.75x the shading units, 2.875x the texture units, 2.875x the ray tracing cores, and adds tensor cores that the AMD part does not list. The ROP count is identical at 64.

Memory architecture diverges sharply. The RX 9050 OEM uses a 64-bit bus with 4 GB GDDR6, while the RTX 4070 GDDR6 uses a 192-bit bus with 12 GB GDDR6. Bandwidth scales accordingly: 144.0 GB/s versus 480.0 GB/s. The AMD card draws 92 W TDP with a 250 W suggested PSU and a single 8-pin connector. The NVIDIA card draws 200 W TDP with a 550 W suggested PSU and a single 16-pin connector. Both are dual-slot designs. The AMD card uses PCIe 5.0 x16; the NVIDIA card uses PCIe 4.0 x16. Display outputs also differ: the RX 9050 OEM has 1x HDMI 2.1b and 2x DisplayPort 2.1a, while the RTX 4070 GDDR6 has 1x HDMI 2.1 and 3x DisplayPort 1.4a. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

FAQ

Q: Which GPU has the higher boost clock?

A: The AMD Radeon RX 9050 OEM boosts to 2600 MHz, while the NVIDIA GeForce RTX 4070 GDDR6 boosts to 2475 MHz. The AMD card is 125 MHz higher.

Q: How much memory bandwidth does each card provide?

A: The RX 9050 OEM provides 144.0 GB/s over a 64-bit bus with 4 GB GDDR6. The RTX 4070 GDDR6 provides 480.0 GB/s over a 192-bit bus with 12 GB GDDR6.

Q: What is the FP32 compute throughput difference?

A: The RTX 4070 GDDR6 delivers 29.15 TFLOPS FP32, versus 10.65 TFLOPS for the RX 9050 OEM. The NVIDIA card is 2.7x higher.

Q: Are the two cards on the same manufacturing process?

A: No. The RX 9050 OEM uses TSMC 4 nm with RDNA 4.0, while the RTX 4070 GDDR6 uses TSMC 5 nm with Ada Lovelace.

Q: What power delivery does each card require?

A: The RX 9050 OEM has a 92 W TDP, a 250 W suggested PSU, and one 8-pin connector. The RTX 4070 GDDR6 has a 200 W TDP, a 550 W suggested PSU, and one 16-pin connector.

Q: Which card has more ray tracing cores?

A: The RTX 4070 GDDR6 has 46 ray tracing cores, while the RX 9050 OEM has 16. The NVIDIA card also has 184 tensor cores; the AMD card lists none.

Specification Differences

| Specification | AMD Radeon RX 9050 OEM | NVIDIA GeForce RTX 4070 GDDR6 |

|---|---|---|

| Architecture | RDNA 4.0 | Ada Lovelace |

| Process node | 4 nm | 5 nm |

| Transistors | 29,700 million | 35,800 million |

| Die size | 199 mm² | 294 mm² |

| Transistor density | 149.2M / mm² | 121.8M / mm² |

| Base clock | 1330 MHz | 1920 MHz |

| Boost clock | 2600 MHz | 2475 MHz |

| Game clock | 1920 MHz | Not listed |

| Memory clock | 2250 MHz (18 Gbps effective) | 2500 MHz (20 Gbps effective) |

| Memory size | 4 GB | 12 GB |

| Memory bus | 64 bit | 192 bit |

| Memory bandwidth | 144.0 GB/s | 480.0 GB/s |

| Shading units | 1024 | 5888 |

| TMUs | 64 | 184 |

| ROPs | 64 | 64 |

| Ray tracing cores | 16 | 46 |

| Tensor cores | Not listed | 184 |

| Pixel rate | 166.4 GPixel/s | 158.4 GPixel/s |

| Texture rate | 166.4 GTexel/s | 455.4 GTexel/s |

| FP32 | 10.65 TFLOPS | 29.15 TFLOPS |

| FP16 | 10.65 TFLOPS (1:1) | 29.15 TFLOPS (1:1) |

| TDP | 92 W | 200 W |

| Power connector | 1x 8-pin | 1x 16-pin |

| Suggested PSU | 250 W | 550 W |

| Bus interface | PCIe 5.0 x16 | PCIe 4.0 x16 |

| Display outputs | 1x HDMI 2.1b, 2x DisplayPort 2.1a | 1x HDMI 2.1, 3x DisplayPort 1.4a |

| Production status | Active | End-of-life |

| Release date | 2026-07-27 | 2024-08-19 |

| Successor | Not listed | GeForce 50 |

| Dimensions | Not listed | 240 mm x 110 mm x 40 mm |

| Launch MSRP | Not listed | 599 USD |

Where Each One Wins

The AMD Radeon RX 9050 OEM wins in several efficiency and interface metrics. Its TDP of 92 W is less than half the RTX 4070 GDDR6's 200 W, and its suggested PSU of 250 W is 300 W lower. The AMD card uses the newer PCIe 5.0 x16 interface versus PCIe 4.0 x16, and it supports DisplayPort 2.1a outputs compared to DisplayPort 1.4a on the NVIDIA card. The RX 9050 OEM also has a higher boost clock at 2600 MHz versus 2475 MHz, a higher pixel rate at 166.4 GPixel/s versus 158.4 GPixel/s, and a denser transistor layout at 149.2 million per mm² versus 121.8 million per mm². It is also listed as Active in production, while the NVIDIA card is End-of-life.

The NVIDIA GeForce RTX 4070 GDDR6 wins on raw compute, memory, and feature set. Its FP32 throughput of 29.15 TFLOPS is 2.7x the RX 9050 OEM's 10.65 TFLOPS. Texture rate is 455.4 GTexel/s versus 166.4 GTexel/s, a 2.7x margin. Memory bandwidth is 480.0 GB/s versus 144.0 GB/s, a 3.3x advantage, with 12 GB capacity versus 4 GB. The NVIDIA card has 5888 shading units versus 1024, 184 TMUs versus 64, 46 ray tracing cores versus 16, and 184 tensor cores versus none. Its base clock is 1920 MHz versus 1330 MHz, and its memory runs at 2500 MHz (20 Gbps effective) versus 2250 MHz (18 Gbps effective). The RTX 4070 GDDR6 is the only one of the two with a recorded benchmark score, 4334.5 in 3DMark Steel Nomad DX12, placing it at the 25th percentile.

The Verdict

The recorded data points to a clear performance hierarchy. The NVIDIA GeForce RTX 4070 GDDR6 holds decisive advantages in shading units, texture units, ray tracing cores, tensor cores, FP32 compute, memory capacity, memory bus width, and memory bandwidth. Its 29.15 TFLOPS FP32 figure and 480.0 GB/s bandwidth dwarf the RX 9050 OEM's 10.65 TFLOPS and 144.0 GB/s. The single recorded benchmark score of 4334.5, while surrounded by low-end rivals in percentile terms, is the only direct measurement available, and it belongs exclusively to the NVIDIA card.

The AMD Radeon RX 9050 OEM is the efficiency pick. Its 92 W TDP, 250 W suggested PSU, and single 8-pin connector indicate a much lighter power footprint than the RTX 4070 GDDR6's 200 W TDP, 550 W suggested PSU, and 16-pin connector. It also offers the newer PCIe 5.0 bus and DisplayPort 2.1a outputs. The higher boost clock and pixel rate are minor wins that do not offset the NVIDIA card's massive compute and memory leads.

For workloads dependent on FP32 throughput, texture filtering, ray tracing, tensor operations, or large memory pools, the RTX 4070 GDDR6 is the stronger part by every recorded metric. For systems constrained by power delivery or those needing the latest display interface, the RX 9050 OEM is the only one of the two that fits those requirements. The production status also matters: the RX 9050 OEM is Active, while the RTX 4070 GDDR6 is End-of-life. The RTX 4070 GDDR6 carries a launch MSRP of 599 USD; the RX 9050 OEM has no recorded launch price. Users seeking maximum compute and memory throughput should select the NVIDIA part; users prioritizing lower power draw and newer connectivity should select the AMD part.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9050 OEM
RTX 4070 GDDR6
Core Specs
Shading Units
1,024
5,888 +475.0%
Shaders
1,024
5,888 +475.0%
TMUs
64
184 +187.5%
ROPs
64
64 0.0%
Compute Units
16
—
SM Count
—
46
Clocks
Base Clock
1330 MHz
1920 MHz
Boost Clock
2600 MHz
2475 MHz
Game Clock
1920 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
2500 MHz 20 Gbps effective
Memory
Memory Size
4 GB
12 GB
VRAM (MB)
4,096
12,288 +200.0%
Memory Type
GDDR6
GDDR6
Memory Bus
64 bit
192 bit
Bandwidth
144.0 GB/s
480.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
2 MB
36 MB
L3 Cache
16 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
166.4 GPixel/s
158.4 GPixel/s
Texture Rate
166.4 GTexel/s
455.4 GTexel/s
FP32 (TFLOPS)
10.65 TFLOPS
29.15 TFLOPS
FP64 (TFLOPS)
332.8 GFLOPS (1:32)
455.4 GFLOPS (1:64)
FP16 (TFLOPS)
10.65 TFLOPS (1:1)
29.15 TFLOPS (1:1)
AI/RT
RT Cores
16
46 +187.5%
Tensor Cores
—
184
Matrix Cores
32
—
Power
TDP
92 W
200 W
TDP (W)
92
200 +117.4%
Suggested PSU
250 W
550 W
Power Connectors
1x 8-pin
1x 16-pin
Architecture
Architecture
RDNA 4.0
Ada Lovelace
GPU Name
Navi 44
AD104
Generation
Navi IV (RX 9000)
GeForce 40
Process Size
4 nm
5 nm
Transistors
29,700 million
35,800 million
Die Size
199 mm²
294 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
121.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
8.9
Shader Model
6.9
6.9
Physical
Slot Width
Dual-slot
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
110 mm 4.3 inches
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 5.0 x16
PCIe 4.0 x16
Other
Launch Price
—
599 USD
Production
Active
End-of-life
Predecessor
Navi III
GeForce 30
Successor
—
GeForce 50
View Radeon RX 9050 OEM Details View GeForce RTX 4070 GDDR6 Details