AMD Radeon PRO W7400 vs NVIDIA GeForce RTX 5070 Ti Comparison
AMD Radeon PRO W7400
GeForce RTX 5070 Ti
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon PRO W7400 vs NVIDIA GeForce RTX 5070 Ti
Where Each One Wins
The recorded data splits these two cards into completely different performance tiers. The AMD Radeon PRO W7400 has no benchmark entries in the database, while the NVIDIA GeForce RTX 5070 Ti carries ten recorded tests. This means every measured win belongs to NVIDIA, and the W7400's capabilities must be inferred from its architectural specifications rather than direct scores.
The RTX 5070 Ti posts an average benchmark score of 49,957, placing it in the 86th percentile of all GPUs tracked. Its nearest rivals in the database include the AMD Radeon RX 6900 XT at 50,951 (2% ahead), the AMD Radeon RX Vega 64 at 50,001 (0.1% ahead), the Intel Arc A550M at 49,737 (0.4% behind), and the AMD Radeon RX 6800 XT at 48,477 (3.1% behind). This positions the RTX 5070 Ti as a high-performance card that trades blows with previous flagship models.
Looking at individual workloads, the RTX 5070 Ti shows its strongest showing in 3DMark Steel Nomad DX12 with a score of 6,604. That test stresses modern DirectX 12 rendering pipelines with ray-traced geometry and asynchronous compute. The Geekbench scores tell a different story, with OpenCL at 212,363 and Vulkan at 225,122, indicating strong general-purpose compute and cross-API graphics performance. The Vulkan score being higher than OpenCL suggests the Blackwell architecture handles Vulkan's lower-level control particularly well.
The PassMark suite reveals the card's character across older APIs. DirectX 9 scores 351, DirectX 10 scores 192, DirectX 11 scores 300, and DirectX 12 scores 127. The G2D score of 1,332 and G3D score of 32,974, plus a GPU compute score of 20,203, round out the picture. The relatively lower DirectX 12 PassMark score compared to G3D suggests that PassMark's DX12 test may not fully exercise the card's capabilities, while the aggregate G3D number reflects broader rasterization performance.
For the W7400, the absence of benchmark data means the database records zero wins. Its specifications describe a workstation-oriented card with 1,792 shading units, 112 texture mapping units, and 64 ROPs. The 28 ray tracing cores and RDNA 3.0 architecture indicate modern feature support, but without scores, its relative position cannot be quantified against the RTX 5070 Ti.
The Verdict
The data supports a clear separation of use cases. The NVIDIA GeForce RTX 5070 Ti is the only card in this comparison with measurable performance, and those measurements place it firmly in the enthusiast segment. Its 86th percentile ranking, 43.94 TFLOPS FP32 throughput, and 16 GB of GDDR7 memory on a 256-bit bus with 896.0 GB/s bandwidth position it for high-resolution gaming, ray tracing workloads, and compute-heavy applications.
The AMD Radeon PRO W7400, with its 7.885 TFLOPS FP32, 8 GB GDDR6 on a 128-bit bus, and 172.8 GB/s bandwidth, targets a different segment entirely. The 55 W TDP, single-slot design, and lack of power connectors indicate a low-power professional card for multi-display setups or constrained environments. Its four DisplayPort 2.1 outputs and PCIe 4.0 x8 interface suggest workstation use rather than raw rendering throughput.
Who should pick which depends strictly on the workload requirements. The RTX 5070 Ti answers demands for high frame rates, large memory pools, and modern API support. The W7400 serves scenarios where power draw, physical footprint, and display connectivity matter more than raw compute. The 300 W TDP of the RTX 5070 Ti versus 55 W for the W7400 represents a 5.45x difference in power consumption, and the physical dimensions differ substantially: 304 mm length versus 168 mm, 137 mm height versus 69 mm, and 48 mm width versus 20 mm.
The RTX 5070 Ti launched with an MSRP of 749 USD, a figure stated once here for reference. No pricing data exists for the W7400 in the database.
Head-to-Head Benchmarks
Since the database contains no head-to-head benchmark entries and the W7400 has zero recorded scores, the comparison relies entirely on the RTX 5070 Ti's absolute numbers and its rival deltas. The RTX 5070 Ti's average score of 49,957 stands 3.1% above the AMD Radeon RX 6800 XT's 48,477, making that the card's largest recorded advantage over a nearby competitor. Against the Intel Arc A550M at 49,737, the margin narrows to 0.4%, and the card trails both the AMD Radeon RX Vega 64 by 0.1% (50,001) and the AMD Radeon RX 6900 XT by 2% (50,951).
In specific workloads, the RTX 5070 Ti's Geekbench Vulkan score of 225,122 exceeds its OpenCL score of 212,363 by 6%. The 3DMark Steel Nomad result of 6,604 provides a modern-game benchmark point. PassMark G3D at 32,974 versus G2D at 1,332 shows the card's 3D advantage over 2D tasks by a factor of 24.7x. The compute score of 20,203 sits between the DirectX 11 and DirectX 9 results in magnitude, suggesting compute performance roughly two-thirds of the G3D rasterization score.
The architecture numbers explain these results. The RTX 5070 Ti's 8,960 shading units, 280 TMUs, and 96 ROPs deliver a pixel rate of 235.4 GPixel/s and texture rate of 686.6 GTexel/s. The 70 RT cores and 280 tensor cores support ray tracing and AI-accelerated features. The W7400's 1,792 shading units, 112 TMUs, and 64 ROPs produce 70.40 GPixel/s and 123.2 GTexel/s, representing 29.9% of the pixel rate and 17.9% of the texture rate of the RTX 5070 Ti.
Clock speeds tell a similar story. The RTX 5070 Ti boosts to 2,452 MHz from a 2,295 MHz base, while the W7400 boosts to 1,100 MHz from 330 MHz. The W7400's unusually low base clock suggests aggressive power management, consistent with its 55 W TDP. Memory clocks differ as well: 1,750 MHz (28 Gbps effective) for GDDR7 versus 1,350 MHz (10.8 Gbps effective) for GDDR6.
FAQ
Q: Which card has more memory bandwidth?
A: The NVIDIA GeForce RTX 5070 Ti has 896.0 GB/s bandwidth from 16 GB of GDDR7 on a 256-bit bus. The AMD Radeon PRO W7400 has 172.8 GB/s from 8 GB of GDDR6 on a 128-bit bus. The RTX 5070 Ti's bandwidth is 5.18x higher.
Q: How do the transistor counts compare?
A: The RTX 5070 Ti contains 45,600 million transistors on a 378 mm² die using a 5 nm process. The W7400 has 13,300 million transistors on a 204 mm² die using a 6 nm process. The RTX 5070 Ti's transistor density is 120.6M per mm² versus 65.2M per mm² for the W7400.
Q: What is the FP32 compute difference?
A: The RTX 5070 Ti delivers 43.94 TFLOPS FP32, while the W7400 delivers 7.885 TFLOPS. The RTX 5070 Ti has 5.57x the FP32 throughput. Both cards offer FP16 at a 1:1 ratio with FP32.
Q: Do both cards support the same APIs?
A: Yes, both list DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The RTX 5070 Ti adds 280 tensor cores for AI workloads, while the W7400 has no tensor core count listed.
Q: Which card has more display outputs?
A: The W7400 has 4x DisplayPort 2.1 outputs. The RTX 5070 Ti has 1x HDMI 2.1b and 3x DisplayPort 2.1b. The W7400 offers one more DisplayPort, while the RTX 5070 Ti adds an HDMI option.
Q: How do power requirements compare?
A: The W7400 has a 55 W TDP, no power connectors, and a suggested PSU of 250 W. The RTX 5070 Ti has a 300 W TDP, one 16-pin connector, and a suggested PSU of 700 W. The RTX 5070 Ti requires 2.8x more PSU capacity.
Architecture Differences
The two cards come from different architectural generations and design philosophies. The AMD Radeon PRO W7400 uses the Navi 33 chip built on RDNA 3.0 architecture with the codename Hotpink Bonefish. It belongs to the Radeon Pro Navi (Navi III Series) generation. The NVIDIA GeForce RTX 5070 Ti uses the GB203 chip on Blackwell 2.0 architecture and belongs to the GeForce 50 generation.
Process technology differs: the W7400 uses a 6 nm process, while the RTX 5070 Ti uses 5 nm. Both come from TSMC. The transistor counts reflect the generational gap: 13,300 million for the W7400 versus 45,600 million for the RTX 5070 Ti, a 3.43x difference. Die sizes are 204 mm² versus 378 mm², making the RTX 5070 Ti 1.85x larger physically.
The RTX 5070 Ti includes dedicated tensor cores (280 of them) for AI and machine learning tasks, a feature absent from the W7400's specification list. Ray tracing cores number 70 on the RTX 5070 Ti versus 28 on the W7400, a 2.5x advantage. The RTX 5070 Ti also packs 8,960 shading units, 280 TMUs, and 96 ROPs, compared to 1,792, 112, and 64 respectively.
Memory architecture diverges significantly. The RTX 5070 Ti uses GDDR7 at 28 Gbps effective on a 256-bit bus, yielding 896.0 GB/s. The W7400 uses GDDR6 at 10.8 Gbps effective on a 128-bit bus, yielding 172.8 GB/s. The memory interface width doubles, and the memory generation advances, producing a 5.18x bandwidth gap.
Bus interfaces also differ: PCIe 4.0 x8 for the W7400 versus PCIe 5.0 x16 for the RTX 5070 Ti. This affects host communication bandwidth and may matter for data-transfer-heavy workloads. The RTX 5070 Ti's predecessor is GeForce 40, and its successor is GeForce 60. The W7400's predecessor is Radeon Pro Vega, with no successor listed.
Specification Differences
The specification table below highlights only the fields where the two cards differ.
| Specification | AMD Radeon PRO W7400 | NVIDIA GeForce RTX 5070 Ti |
|---|---|---|
| Architecture | RDNA 3.0 | Blackwell 2.0 |
| Chip | Navi 33 | GB203 |
| Codename | Hotpink Bonefish | None |
| Process Node | 6 nm | 5 nm |
| Transistors | 13,300 million | 45,600 million |
| Die Size | 204 mm² | 378 mm² |
| Transistor Density | 65.2M / mm² | 120.6M / mm² |
| Base Clock | 330 MHz | 2295 MHz |
| Boost Clock | 1100 MHz | 2452 MHz |
| Memory Clock | 1350 MHz, 10.8 Gbps effective | 1750 MHz, 28 Gbps effective |
| Memory Size | 8 GB | 16 GB |
| Memory Type | GDDR6 | GDDR7 |
| Memory Bus Width | 128 bit | 256 bit |
| Memory Bandwidth | 172.8 GB/s | 896.0 GB/s |
| Shading Units | 1792 | 8960 |
| TMUs | 112 | 280 |
| ROPs | 64 | 96 |
| RT Cores | 28 | 70 |
| Tensor Cores | None listed | 280 |
| Pixel Rate | 70.40 GPixel/s | 235.4 GPixel/s |
| Texture Rate | 123.2 GTexel/s | 686.6 GTexel/s |
| FP32 | 7.885 TFLOPS | 43.94 TFLOPS |
| FP16 | 7.885 TFLOPS (1:1) | 43.94 TFLOPS (1:1) |
| TDP | 55 W | 300 W |
| Slot Width | Single-slot | Dual-slot |
| Power Connectors | None | 1x 16-pin |
| Suggested PSU | 250 W | 700 W |
| Bus Interface | PCIe 4.0 x8 | PCIe 5.0 x16 |
| Display Outputs | 4x DisplayPort 2.1 | 1x HDMI 2.1b, 3x DisplayPort 2.1b |
| Dimensions (L/H/W) | 168/69/20 mm | 304/137/48 mm |
| Release Date | 2025-08-02 | 2025-02-19 |
| Predecessor | Radeon Pro Vega | GeForce 40 |
| Successor | None | GeForce 60 |
| Launch MSRP | None | 749 USD |
| Avg Benchmark Score | 0 | 49,957 |
| Percentile vs All GPUs | 50 | 86 |
The two cards share DirectX 12 Ultimate (12_2), OpenGL 4.6, Vulkan 1.4, and both are actively in production. Their release dates differ by roughly six months, with the RTX 5070 Ti launching first on 2025-02-19 and the W7400 following on 2025-08-02.