AMD Radeon Pro 5600M vs NVIDIA GeForce RTX 5090 D V2 Comparison

AMD
RADEON

AMD Radeon Pro 5600M

CORE STATE Navi 12
VRAM 8 GB
CLOCK SPEED 1144 MHz
TDP 50 W
BUS WIDTH 2048 bit
ARCHITECTURE RDNA 1.0
nm
PROCESS 7 nm
LAUNCH DATE 2020
VS
NVIDIA
GEFORCE

GeForce RTX 5090 D V2

CORE STATE GB202
VRAM 24 GB
CLOCK SPEED 2407 MHz
TDP 575 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_metal
55,030
N/A
geekbench_opencl
47,783
N/A
geekbench_vulkan
46,425
N/A
passmark_directx_10
62
N/A
passmark_directx_11
59
N/A
passmark_directx_12
39
N/A
passmark_directx_9
118
N/A
passmark_g2d
679
N/A
passmark_g3d
9,279
N/A
passmark_gpu_compute
4,031
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
16,504

Analysis: AMD Radeon Pro 5600M vs NVIDIA GeForce RTX 5090 D V2

The NVIDIA GeForce RTX 5090 D V2 and the AMD Radeon Pro 5600M occupy vastly different corners of the GPU landscape, yet their aggregate benchmark scores place them surprisingly close. The RTX 5090 D V2 posts a 3DMark Steel Nomad DX12 score of 16,504, while the Radeon Pro 5600M, based on its averaged benchmark data, achieves 16,351. This results in a razor-thin delta of roughly 0.9% in favor of the NVIDIA part. The nearest rival data confirms the tight grouping: the RTX 5090 D V2 sits within 0.5% of the AMD Radeon PRO W7500 and 0.6% of the NVIDIA RTX PRO 6000 Blackwell, while the Radeon Pro 5600M trails the RX 5700 XT by just 0.1% and the RTX PRO 6000 by 0.3%. Both cards share the 59th percentile ranking among all GPUs, indicating that despite their architectural chasm, their overall performance footprint is nearly identical.

Head-to-Head Benchmarks

The head-to-head benchmark table is empty, meaning no direct comparative test was run between these two specific cards. However, the aggregate data provides a clear picture. The RTX 5090 D V2’s single 3DMark Steel Nomad DX12 score of 16,504 stands as its only benchmark entry, representing its entire performance profile in this database. The Radeon Pro 5600M, by contrast, has a rich set of ten benchmark results, spanning Geekbench and Passmark suites. Its strongest showing is in Geekbench Metal with 55,030 points, followed by OpenCL at 47,783 and Vulkan at 46,425. These figures demonstrate that the Radeon Pro 5600M excels in compute-oriented workloads, particularly those leveraging Apple’s Metal API, which aligns with its mobile Mac positioning.

In Passmark tests, the Radeon Pro 5600M shows a more nuanced picture. Its DirectX 9 score of 118 and G2D score of 679 are modest, while the DirectX 10 and 11 scores drop to 62 and 59 respectively. The DirectX 12 score falls further to 39, suggesting that the card’s older RDNA 1.0 architecture struggles with modern API overhead. The G3D score of 9,279 and GPU compute score of 4,031 round out its profile. The RTX 5090 D V2 has no corresponding Passmark data, so a direct comparison across these workloads is impossible. What the data does show is that the NVIDIA card’s single benchmark result is 153 points higher than the AMD card’s average, a margin that falls within the noise of the nearest rivals, which show deltas as small as 0.1% between adjacent cards.

The biggest wins for the RTX 5090 D V2 are in raw specification-driven metrics that do not appear in the benchmark array. Its pixel rate of 423.6 GPixel/s dwarfs the Radeon Pro 5600M’s 73.22 GPixel/s, a 5.8x advantage. Similarly, the texture rate of 1,636.8 GTexel/s versus 183.0 GTexel/s represents a 8.9x gap. FP32 throughput tells the same story: 104.8 TFLOPS against 5.857 TFLOPS, an 18x difference. These are theoretical maxima, but they underscore the NVIDIA card’s compute headroom. The Radeon Pro 5600M counters with a 2:1 FP16 ratio, delivering 11.71 TFLOPS half-precision versus its FP32, while the RTX 5090 D V2 runs FP16 at a 1:1 ratio, keeping both at 104.8 TFLOPS. The AMD card’s memory bandwidth of 394.2 GB/s is respectable for its class, but the RTX 5090 D V2’s 1.34 TB/s is 3.4x higher.

FAQ

Q: Which GPU has the higher average benchmark score?

A: The NVIDIA GeForce RTX 5090 D V2 has an average benchmark score of 16,504, while the AMD Radeon Pro 5600M averages 16,351. This gives the NVIDIA card a 0.9% lead, as reflected in the nearestRivals deltaPct of -0.9% for the AMD card when compared to its rival.

Q: How do the two cards compare in terms of memory configuration?

A: The RTX 5090 D V2 offers 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth. The Radeon Pro 5600M provides 8 GB of HBM2 on a 2048-bit bus with 394.2 GB/s bandwidth. The NVIDIA card has three times the capacity and 3.4 times the bandwidth.

Q: What is the architectural generation gap between these GPUs?

A: The RTX 5090 D V2 uses the GB202 chip on a 5 nm process with Blackwell 2.0 architecture, released on 2025-08-14. The Radeon Pro 5600M uses the Navi 12 chip on a 7 nm process with RDNA 1.0 architecture, released on 2020-06-14. This represents a five-year gap in release timing and a two-node shrink in process technology.

Q: Which card supports ray tracing and tensor operations?

A: The RTX 5090 D V2 includes 170 RT cores and 680 tensor cores, enabling dedicated ray tracing and AI acceleration. The Radeon Pro 5600M lists null values for both RT cores and tensor cores, indicating no dedicated hardware for these functions in the database.

Q: How does power consumption differ between the two?

A: The RTX 5090 D V2 has a TDP of 575 W and requires a 950 W suggested PSU with a 1x 16-pin power connector. The Radeon Pro 5600M has a TDP of 50 W, requires no power connectors, and is classified as an IGP (integrated graphics processor) for portable devices.

Q: What API levels do the two cards support?

A: The RTX 5090 D V2 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The Radeon Pro 5600M supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.3. The NVIDIA card has a more advanced DirectX feature level and a newer Vulkan revision.

Architecture Differences

The architectural divide between these two GPUs is generational and fundamental. The RTX 5090 D V2 is built on NVIDIA’s Blackwell 2.0 architecture using the GB202 chip, fabricated on a 5 nm process at TSMC. It integrates 92,200 million transistors on a 750 mm² die, yielding a transistor density of 122.9 million per square millimeter. This massive chip is partitioned into 21,760 shading units, 680 TMUs, 176 ROPs, 170 RT cores, and 680 tensor cores. The inclusion of dedicated RT and tensor cores is a defining feature, enabling hardware-accelerated ray tracing and AI workloads that the AMD card cannot match at a hardware level.

The Radeon Pro 5600M employs AMD’s RDNA 1.0 architecture on the Navi 12 chip, fabricated on a 7 nm process, also at TSMC. Its transistor count and die size are not listed in the database, but the chip is configured with 2,560 shading units, 160 TMUs, and 64 ROPs. It has no dedicated RT or tensor cores, with null values in the database for both. The RDNA 1.0 architecture predates AMD’s ray tracing hardware, which arrived with RDNA 2.0. The process node difference—5 nm versus 7 nm—explains part of the performance density gap, but the architectural innovations in Blackwell 2.0, including the tensor core array, are the primary drivers of the NVIDIA card’s compute advantages.

Memory architecture also diverges sharply. The RTX 5090 D V2 uses 24 GB of GDDR7 on a 384-bit bus, a modern high-bandwidth memory standard. The Radeon Pro 5600M uses 8 GB of HBM2 on a 2048-bit bus, an older but still capable memory type that favors bandwidth over capacity. The effective memory clock differs as well: the NVIDIA card runs at 1,750 MHz with 28 Gbps effective, while the AMD card runs at 770 MHz with 1,540 Mbps effective. The HBM2’s wide bus compensates somewhat, but the GDDR7’s higher per-pin throughput wins decisively in total bandwidth.

Specification Differences

The specification tables reveal stark contrasts across nearly every measurable field. The RTX 5090 D V2 has a base clock of 2,017 MHz and a boost clock of 2,407 MHz, while the Radeon Pro 5600M operates at 822 MHz base and 1,144 MHz boost. This is a 2.5x difference in base clock and 2.1x in boost. The NVIDIA card’s FP32 throughput is 104.8 TFLOPS versus 5.857 TFLOPS for the AMD card, an 18x gap. FP16 performance is 104.8 TFLOPS (1:1) for NVIDIA and 11.71 TFLOPS (2:1) for AMD, a 9x difference.

The pixel rate and texture rate follow the same pattern: 423.6 GPixel/s and 1,636.8 GTexel/s for NVIDIA, against 73.22 GPixel/s and 183.0 GTexel/s for AMD. The memory subsystem shows 24 GB GDDR7 with 1.34 TB/s bandwidth versus 8 GB HBM2 with 394.2 GB/s. Power consumption is a dramatic differentiator: the RTX 5090 D V2 consumes 575 W and requires a 950 W PSU, while the Radeon Pro 5600M draws just 50 W and needs no external power. The form factors differ too—the NVIDIA card is a dual-slot, 304 mm long unit with a 16-pin connector, while the AMD card is an IGP with no dimensions listed and portable-device-dependent outputs.

The bus interface also differs: PCIe 5.0 x16 for NVIDIA versus PCIe 4.0 x16 for AMD. Display outputs are another point of separation—the RTX 5090 D V2 offers 1x HDMI 2.1b and 3x DisplayPort 2.1b, while the Radeon Pro 5600M’s outputs are listed as “Portable Device Dependent,” reflecting its mobile integration. The NVIDIA card is marked as Active production status with a launch MSRP of 2,299 USD, while the AMD card is End-of-life with no launch MSRP listed.

The Verdict

The data paints a clear picture for different use cases. The RTX 5090 D V2 is a desktop-class powerhouse designed for maximum compute and graphics throughput. Its 104.8 TFLOPS FP32, 170 RT cores, and 680 tensor cores make it suitable for demanding ray-traced workloads, AI inference, and high-resolution gaming, all supported by 24 GB of GDDR7 memory. Its 575 W TDP and 950 W PSU requirement indicate a system built around performance, not efficiency. Users with a 2025-era desktop platform and a need for top-tier graphics should select this card.

The Radeon Pro 5600M is a mobile integrated GPU from 2020, built for portability and efficiency. Its 50 W TDP and IGP classification mean it operates without discrete power connectors, making it ideal for laptops and compact systems. The 8 GB HBM2 memory and 394.2 GB/s bandwidth are sufficient for its intended workload, and its Geekbench Metal score of 55,030 suggests strong performance in Apple-centric environments. However, its lack of RT cores and tensor cores, combined with a 1.4x lower FP32 throughput, limits its suitability for modern ray-traced games or AI workloads. The benchmark results show it holding its own in aggregate scoring, but that is an artifact of the averaging across multiple test suites, not a sign of competitive raw performance.

For anyone building a high-end desktop workstation or gaming rig, the RTX 5090 D V2 is the only logical choice from these two. For a low-power mobile system where efficiency and portability are paramount, the Radeon Pro 5600M is the appropriate pick. The 0.9% aggregate score difference is misleading; the specifications reveal a chasm in capability. The verdict is not about which card is “better” in absolute terms, but which fits the intended platform and workload. The data supports the RTX 5090 D V2 for performance-critical tasks and the Radeon Pro 5600M for energy-constrained, portable deployments.

DETAILED SPECIFICATIONS

SPECIFICATION
Pro 5600M
RTX 5090 D V2
Core Specs
Shading Units
2,560
21,760 +750.0%
Shaders
2,560
21,760 +750.0%
TMUs
160
680 +325.0%
ROPs
64
176 +175.0%
Compute Units
40
—
SM Count
—
170
Clocks
Base Clock
822 MHz
2017 MHz
Boost Clock
1144 MHz
2407 MHz
Memory Clock
770 MHz 1540 Mbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
8 GB
24 GB
VRAM (MB)
8,192
24,576 +200.0%
Memory Type
HBM2
GDDR7
Memory Bus
2048 bit
384 bit
Bandwidth
394.2 GB/s
1.34 TB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
4 MB
96 MB
Performance
Pixel Rate
73.22 GPixel/s
423.6 GPixel/s
Texture Rate
183.0 GTexel/s
1,636.8 GTexel/s
FP32 (TFLOPS)
5.857 TFLOPS
104.8 TFLOPS
FP64 (TFLOPS)
366.1 GFLOPS (1:16)
1.637 TFLOPS (1:64)
FP16 (TFLOPS)
11.71 TFLOPS (2:1)
104.8 TFLOPS (1:1)
AI/RT
RT Cores
—
170
Tensor Cores
—
680
Power
TDP
50 W
575 W
TDP (W)
50
575 +1050.0%
Suggested PSU
—
950 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 1.0
Blackwell 2.0
GPU Name
Navi 12
GB202
Generation
Radeon Pro Mac (Navi Mobile)
GeForce 50
Process Size
7 nm
5 nm
Transistors
—
92,200 million
Die Size
—
750 mm²
Foundry
TSMC
TSMC
Density
—
122.9M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.3
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.0
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
304 mm 12 inches
Height
—
137 mm 5.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 4.0 x16
PCIe 5.0 x16
Other
Launch Price
—
2,299 USD
Production
End-of-life
Active
Predecessor
—
GeForce 40
Successor
—
GeForce 60
View Radeon Pro 5600M Details View GeForce RTX 5090 D V2 Details