AMD Radeon 8060S vs AMD Radeon RX 9060 XT LP Comparison

AMD
RADEON

AMD Radeon 8060S

CORE STATE Strix Halo
VRAM System Shared
CLOCK SPEED 2900 MHz
TDP 55 W
BUS WIDTH System Shared
ARCHITECTURE RDNA 3.5
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
AMD
RADEON

Radeon RX 9060 XT LP

CORE STATE Navi 44
VRAM 16 GB
CLOCK SPEED 3050 MHz
TDP 140 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
2,162
N/A
geekbench_opencl
84,626
88,183
geekbench_vulkan
80,483
39,476

Analysis: AMD Radeon 8060S vs AMD Radeon RX 9060 XT LP

AMD Radeon RX 9060 XT LP and AMD Radeon 8060S are both active AMD parts, but they target different corners of the market. The RX 9060 XT LP is a discrete, dual-slot add-in card from the Radeon RX 9000 series, built on the Navi 44 chip with RDNA 4.0 architecture. The 8060S is an integrated graphics processor (IGP) from the Navi Mobile generation, using the Strix Halo chip with RDNA 3.5. Benchmark data shows a split decision: the RX 9060 XT LP wins one head-to-head test, and the 8060S wins the other, with the overall average benchmark score favoring the discrete card.

Head-to-Head Benchmarks

The two GPUs share two common benchmark results, and the outcomes are starkly different. In the Geekbench OpenCL test, the AMD Radeon RX 9060 XT LP scores 88183, while the AMD Radeon 8060S scores 84626. This gives the RX 9060 XT LP a 4.2% lead. That is a modest but clear margin—enough to call the discrete card the faster compute engine in this specific API, but not a dominant one. The data indicates the RX 9060 XT LP's advantage here aligns with its higher FP32 throughput of 24.99 TFLOPS versus the 8060S's 14.85 TFLOPS, though the gap in raw numbers is much wider than the benchmark delta suggests. In practice, a 4.2% difference means the RX 9060 XT LP finishes OpenCL workloads just ahead, but the 8060S is not far behind.

The Geekbench Vulkan result flips the script entirely. Here, the AMD Radeon 8060S scores 80483, while the AMD Radeon RX 9060 XT LP scores only 39476. That is a 51% deficit for the RX 9060 XT LP—a massive swing. The 8060S more than doubles the Vulkan score of its discrete counterpart. This is not a marginal win; it is a decisive one. The Vulkan test likely stresses different parts of the graphics pipeline, and the 8060S's architecture, despite lower FP32 and texture rates, handles it far more efficiently. For any workload that leans on Vulkan, the 8060S is the clear choice based on this data. The RX 9060 XT LP's Vulkan score is less than half of the 8060S's, which is a red flag for users who prioritize Vulkan-based games or applications.

Looking at the overall averages, the RX 9060 XT LP has an average benchmark score of 63830, while the 8060S sits at 55757. That is roughly a 14.5% gap in favor of the discrete card, driven entirely by the OpenCL result since the Vulkan test heavily favors the 8060S. The percentile rankings reflect this: the RX 9060 XT LP sits in the 89th percentile of all GPUs, while the 8060S is in the 87th. Both are strong performers, but the RX 9060 XT LP edges ahead in overall standing.

Where Each One Wins

The AMD Radeon RX 9060 XT LP wins in raw compute and memory bandwidth scenarios. Its 16 GB of GDDR6 memory delivers 322.3 GB/s of bandwidth, whereas the 8060S uses system-shared memory with bandwidth that is system dependent—meaning it can vary wildly based on the host machine's RAM. For compute-heavy tasks that fit in the OpenCL model, the RX 9060 XT LP is the safer bet, as its 4.2% lead in that benchmark shows. It also has a higher boost clock at 3050 MHz versus 2900 MHz, and a higher pixel rate of 195.2 GPixel/s versus 185.6 GPixel/s. If you are doing general GPU compute, rendering, or number-crunching that uses OpenCL, the discrete card wins.

The AMD Radeon 8060S wins decisively in Vulkan-based workloads. With a 51% higher Vulkan score, it is the superior choice for Vulkan gaming or any application that uses this API. The 8060S also has more shading units (2560 versus 2048), more texture mapping units (160 versus 128), and more ray tracing cores (40 versus 32). These architectural advantages likely explain why it dominates in Vulkan, which often scales with these resources. For users who play Vulkan-native games or run Vulkan-based graphics workloads, the 8060S is the clear winner, despite its lower overall average score. It also has a much lower TDP at 55 W versus 140 W, so it wins on efficiency, though that is a power figure, not a benchmark score.

Architecture Differences

The two GPUs come from different architectural generations. The AMD Radeon RX 9060 XT LP uses RDNA 4.0, while the AMD Radeon 8060S uses RDNA 3.5. Both are built on a 4 nm process at TSMC, so the node is identical. The chip sizes differ notably: the RX 9060 XT LP's Navi 44 die is 199 mm², while the 8060S's Strix Halo die is 308 mm². The transistor count for the RX 9060 XT LP is 29,700 million, giving it a density of 149.2M transistors per mm². The 8060S's transistor count is listed as unknown, so no direct comparison is possible there.

Memory is a major divide. The RX 9060 XT LP has 16 GB of dedicated GDDR6 on a 128-bit bus, delivering 322.3 GB/s. The 8060S uses system-shared memory, with a bus width and bandwidth that are system dependent. This means the 8060S's memory performance is only as good as the host system's RAM, while the RX 9060 XT LP has fixed, guaranteed bandwidth. For memory-sensitive workloads, the discrete card's dedicated VRAM is a structural advantage.

The compute resources favor the 8060S in count: 2560 shading units, 160 TMUs, 64 ROPs, and 40 RT cores. The RX 9060 XT LP has 2048 shading units, 128 TMUs, 64 ROPs, and 32 RT cores. However, the RX 9060 XT LP has higher clock speeds—base 1380 MHz and boost 3050 MHz versus the 8060S's 1295 MHz base and 2900 MHz boost. This leads to the RX 9060 XT LP achieving 24.99 TFLOPS FP32, while the 8060S manages 14.85 TFLOPS. The texture rate also favors the 8060S at 464.0 GTexel/s versus 390.4 GTexel/s, while the pixel rate favors the RX 9060 XT LP at 195.2 GPixel/s versus 185.6 GPixel/s. The 8060S is an IGP with no power connectors and a 55 W TDP, while the RX 9060 XT LP is a dual-slot card with a 1x 8-pin connector and a 140 W TDP, requiring a 300 W PSU.

The Verdict

The data paints a clear picture for different use cases. If your priority is Vulkan performance, the AMD Radeon 8060S is the only choice. Its 80483 Vulkan score versus 39476 for the RX 9060 XT LP is a 51% advantage, which is too large to ignore. For Vulkan gaming or Vulkan-based compute, the 8060S is categorically faster. It also does this at a 55 W TDP, which is less than half the discrete card's 140 W draw.

If your priority is OpenCL compute or overall average benchmark performance, the AMD Radeon RX 9060 XT LP wins. It leads by 4.2% in OpenCL and has a higher average benchmark score of 63830 versus 55757. It also has dedicated 16 GB GDDR6 memory with 322.3 GB/s bandwidth, which is a fixed resource that does not depend on the system. For users who need consistent memory bandwidth and higher FP32 throughput (24.99 TFLOPS versus 14.85 TFLOPS), the RX 9060 XT LP is the safer bet.

The verdict is not about which GPU is "better" overall—it is about matching the GPU to the workload. The RX 9060 XT LP is the pick for OpenCL-heavy tasks and users who want a discrete card with dedicated VRAM. The 8060S is the pick for Vulkan-heavy tasks and users who want an integrated solution with lower power draw. Given the 51% Vulkan gap, the 8060S is the better gaming-oriented choice for Vulkan titles, while the RX 9060 XT LP is the better compute-oriented choice for OpenCL. The percentile rankings (89th vs 87th) suggest both are above-average GPUs, so neither is a weak option.

FAQ

Q: Which GPU has the higher average benchmark score?

A: The AMD Radeon RX 9060 XT LP has an average benchmark score of 63830, while the AMD Radeon 8060S scores 55757, giving the RX 9060 XT LP a lead of roughly 14.5%.

Q: How big is the Vulkan performance difference?

A: The AMD Radeon 8060S scores 80483 in Geekbench Vulkan, while the AMD Radeon RX 9060 XT LP scores 39476. The 8060S is 51% faster in this test.

Q: Does the RX 9060 XT LP have dedicated memory?

A: Yes, it has 16 GB of GDDR6 memory on a 128-bit bus, providing 322.3 GB/s of bandwidth. The 8060S uses system-shared memory with system-dependent bandwidth.

Q: What are the FP32 compute figures for each GPU?

A: The AMD Radeon RX 9060 XT LP delivers 24.99 TFLOPS FP32, while the AMD Radeon 8060S delivers 14.85 TFLOPS FP32.

Q: Which GPU has more shading units?

A: The AMD Radeon 8060S has 2560 shading units, while the AMD Radeon RX 9060 XT LP has 2048 shading units.

Q: What is the TDP difference between the two?

A: The AMD Radeon RX 9060 XT LP has a TDP of 140 W, while the AMD Radeon 8060S has a TDP of 55 W.

Specification Differences

| Specification | AMD Radeon RX 9060 XT LP | AMD Radeon 8060S |

|---|---|---|

| Architecture | RDNA 4.0 | RDNA 3.5 |

| Chip | Navi 44 | Strix Halo |

| Die Size | 199 mm² | 308 mm² |

| Transistors | 29,700 million | Unknown |

| Base Clock | 1380 MHz | 1295 MHz |

| Boost Clock | 3050 MHz | 2900 MHz |

| Game Clock | 2450 MHz | None |

| Memory Size | 16 GB | System Shared |

| Memory Type | GDDR6 | System Shared |

| Memory Bus Width | 128 bit | System Shared |

| Memory Bandwidth | 322.3 GB/s | System Dependent |

| Shading Units | 2048 | 2560 |

| TMUs | 128 | 160 |

| ROPs | 64 | 64 |

| RT Cores | 32 | 40 |

| Pixel Rate | 195.2 GPixel/s | 185.6 GPixel/s |

| Texture Rate | 390.4 GTexel/s | 464.0 GTexel/s |

| FP32 | 24.99 TFLOPS | 14.85 TFLOPS |

| TDP | 140 W | 55 W |

| Slot Width | Dual-slot | IGP |

| Power Connectors | 1x 8-pin | None |

| Suggested PSU | 300 W | None |

| Display Outputs | 1x HDMI 2.1b, 2x DisplayPort 2.1a | Portable Device Dependent |

| Release Date | 2025-12-16 | 2025-01-05 |

| Predecessor | Navi III | Polaris Mobile |

DETAILED SPECIFICATIONS

SPECIFICATION
8060S
RX 9060 XT LP
Core Specs
Shading Units
2,560
2,048 -20.0%
Shaders
2,560
2,048 -20.0%
TMUs
160
128 -20.0%
ROPs
64
64 0.0%
Compute Units
40
32 -20.0%
Clocks
Base Clock
1295 MHz
1380 MHz
Boost Clock
2900 MHz
3050 MHz
Game Clock
—
2450 MHz
Memory Clock
System Shared
2518 MHz 20.1 Gbps effective
Memory
Memory Size
System Shared
16 GB
VRAM (MB)
—
16,384
Memory Type
System Shared
GDDR6
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
322.3 GB/s
Cache
L2 Cache
2 MB
4 MB
L3 Cache
32 MB
32 MB
L0 Cache
—
32 KB per WGP
Performance
Pixel Rate
185.6 GPixel/s
195.2 GPixel/s
Texture Rate
464.0 GTexel/s
390.4 GTexel/s
FP32 (TFLOPS)
14.85 TFLOPS
24.99 TFLOPS
FP64 (TFLOPS)
464.0 GFLOPS (1:32)
780.8 GFLOPS (1:32)
FP16 (TFLOPS)
14.85 TFLOPS (1:1)
24.99 TFLOPS (1:1)
AI/RT
RT Cores
40
32 -20.0%
Matrix Cores
—
64
Power
TDP
55 W
140 W
TDP (W)
55
140 +154.5%
Suggested PSU
—
300 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
RDNA 3.5
RDNA 4.0
GPU Name
Strix Halo
Navi 44
Generation
Navi Mobile (RX 8000M)
Navi IV (RX 9000)
Process Size
4 nm
4 nm
Transistors
unknown
29,700 million
Die Size
308 mm²
199 mm²
Foundry
TSMC
TSMC
Density
—
149.2M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.1
2.2
Shader Model
6.8
6.9
Physical
Slot Width
IGP
Dual-slot
Outputs
Portable Device Dependent
1x HDMI 2.1b2x DisplayPort 2.1a
Bus Interface
PCIe 5.0 x16
PCIe 5.0 x16
Other
Production
Active
Active
Predecessor
Polaris Mobile
Navi III
View Radeon 8060S Details View Radeon RX 9060 XT LP Details