AMD Instinct MI300A vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison
AMD Instinct MI300A
GeForce RTX 4060 Ti AD104
Analysis: AMD Instinct MI300A vs NVIDIA GeForce RTX 4060 Ti AD104
Head-to-Head Benchmarks
The recorded data shows no direct benchmark comparisons between the AMD Instinct MI300A and the NVIDIA GeForce RTX 4060 Ti AD104. Both products sit at the 50th percentile in the database's GPU rankings, with an average benchmark score of zero for each. This absence of head-to-head results means the two accelerators cannot be evaluated against each other through measured performance metrics alone.
The gap in physical resources is substantial. The MI300A contains 153,000 million transistors on a 1017 mm² die, while the RTX 4060 Ti AD104 uses 35,800 million transistors across a 294 mm² substrate. Transistor density favors the AMD part at 150.4 million per square millimeter versus 121.8 million for NVIDIA. Compute throughput diverges sharply: the MI300A delivers 61.29 TFLOPS of FP32 performance, nearly three times the 22.06 TFLOPS produced by the RTX 4060 Ti. Texture fill rates tell a similar story, with 1,915.2 GTexel/s for the AMD accelerator against 344.8 GTexel/s for the NVIDIA card.
Memory capacity and bandwidth represent the most extreme separation. The MI300A carries 128 GB of HBM3 across a 8192-bit bus, yielding 5.32 TB/s of bandwidth. The RTX 4060 Ti provides 8 GB of GDDR6 on a 128-bit interface, delivering 288.0 GB/s. The AMD solution offers 16 times the memory capacity and over 18 times the bandwidth. Clock speeds invert this relationship: the RTX 4060 Ti runs at 2310 MHz base and 2535 MHz boost, while the MI300A operates at 1000 MHz base and 2100 MHz boost. The NVIDIA part also reaches 121.7 GPixel/s pixel throughput, whereas the MI300A records zero pixel output.
Where Each One Wins
The MI300A dominates in raw compute density and memory subsystem capacity. Its FP32 throughput of 61.29 TFLOPS positions it for heavy numerical workloads, and the 5.32 TB/s memory bandwidth supports large data movement requirements. The 128 GB HBM3 pool allows working sets that far exceed what the RTX 4060 Ti can hold in its 8 GB GDDR6 frame buffer. Texture processing also favors AMD decisively, with the 912 texture mapping units producing 1,915.2 GTexel/s versus NVIDIA's 136 TMUs at 344.8 GTexel/s.
The RTX 4060 Ti wins in areas tied to graphics output and consumer-facing features. It provides 48 raster operation units and achieves 121.7 GPixel/s, enabling conventional display rendering that the MI300A cannot perform, as the AMD unit has no display outputs and zero pixel rate. The NVIDIA card includes 34 ray tracing cores and 136 tensor cores, while the MI300A lists no RT or tensor core counts. Power consumption heavily favors NVIDIA: 160 W TDP for the RTX 4060 Ti versus 750 W for the MI300A, with suggested power supplies of 450 W and 1150 W respectively. The RTX 4060 Ti also supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the MI300A reports no API support.
Form factor differentiates the use cases. The MI300A arrives as an OAM module with no power connectors and no display outputs, indicating a server or datacenter orientation. The RTX 4060 Ti uses a dual-slot layout, measures 240 mm in length, 111 mm in height, and 40 mm in width, and includes one 16-pin power connector plus HDMI and DisplayPort outputs.
Architecture Differences
The MI300A uses the CDNA 3.0 architecture implemented on the Aqua Vanjaram chip, manufactured by TSMC at 5 nm. The RTX 4060 Ti AD104 uses the Ada Lovelace architecture on the AD104 chip, also from TSMC at the same 5 nm process node. Both parts share the process node and foundry, but their design philosophies diverge completely.
Transistor counts reveal the scale difference: 153,000 million for the MI300A against 35,800 million for the RTX 4060 Ti. Die area measures 1017 mm² for the AMD accelerator and 294 mm² for the NVIDIA card. The MI300A allocates its transistors across 14,592 shading units, 912 TMUs, and zero ROPs, while the RTX 4060 Ti uses 4,352 shading units, 136 TMUs, and 48 ROPs. The NVIDIA part adds dedicated hardware in the form of 34 RT cores and 136 tensor cores, neither of which are specified for the MI300A.
Memory architecture represents the most fundamental split. The MI300A employs HBM3 with a 8192-bit bus width and 5.32 TB/s bandwidth, operating at 1300 MHz with 5.2 Gbps effective data rate. The RTX 4060 Ti uses GDDR6 on a 128-bit bus at 288.0 GB/s, running at 2250 MHz with 18 Gbps effective speed. The bus width difference, 8192 bits versus 128 bits, explains the bandwidth disparity despite the NVIDIA part's higher memory clock.
Interface and expansion differ as well. The MI300A connects through PCIe 5.0 x16, while the RTX 4060 Ti uses PCIe 4.0 x8. Power delivery contrasts sharply: the MI300A lists no power connectors and a 750 W TDP, whereas the RTX 4060 Ti draws 160 W through a single 16-pin connector. The suggested power supply ratings follow at 1150 W for AMD and 450 W for NVIDIA. The MI300A occupies OAM module slot width with no display outputs, while the RTX 4060 Ti is dual-slot with HDMI 2.1 and three DisplayPort 1.4a outputs.
Release timing places the MI300A on 2023-12-05 and the RTX 4060 Ti AD104 on 2024-03-31. The NVIDIA card is marked end-of-life, with the GeForce 30 series as predecessor and GeForce 50 as successor. The MI300A lists Radeon Instinct as its predecessor with no successor recorded. The RTX 4060 Ti carries a launch MSRP of 399 USD.
FAQ
Q: Which product has higher FP32 compute performance?
A: The AMD Instinct MI300A delivers 61.29 TFLOPS of FP32 throughput, while the NVIDIA GeForce RTX 4060 Ti AD104 produces 22.06 TFLOPS. The MI300A's figure is approximately 2.8 times higher.
Q: How do the memory subsystems compare?
A: The MI300A provides 128 GB of HBM3 on a 8192-bit bus with 5.32 TB/s bandwidth. The RTX 4060 Ti offers 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth. The AMD part has 16 times the capacity and roughly 18.5 times the bandwidth.
Q: Does the MI300A support graphics rendering?
A: No. The MI300A has zero ROPs, a pixel rate of 0 MPixel/s, no display outputs, and no DirectX, OpenGL, or Vulkan support. The RTX 4060 Ti includes 48 ROPs, 121.7 GPixel/s pixel rate, and full API support including DirectX 12 Ultimate and Vulkan 1.4.
Q: What is the power consumption difference?
A: The MI300A has a TDP of 750 W with a suggested power supply of 1150 W. The RTX 4060 Ti has a TDP of 160 W with a suggested power supply of 450 W. The NVIDIA card draws substantially less power.
Q: Which product includes ray tracing and tensor cores?
A: The RTX 4060 Ti includes 34 ray tracing cores and 136 tensor cores. The MI300A lists no RT core or tensor core counts in the recorded data.
Q: What are the release dates and production status?
A: The MI300A released on 2023-12-05 with no production status recorded. The RTX 4060 Ti AD104 released on 2024-03-31 and is marked end-of-life.
Specification Differences
| Specification | AMD Instinct MI300A | NVIDIA GeForce RTX 4060 Ti AD104 |
|---|---|---|
| Architecture | CDNA 3.0 | Ada Lovelace |
| Chip | Aqua Vanjaram | AD104 |
| Transistors | 153,000 million | 35,800 million |
| Die Size | 1017 mm² | 294 mm² |
| Transistor Density | 150.4M / mm² | 121.8M / mm² |
| Base Clock | 1000 MHz | 2310 MHz |
| Boost Clock | 2100 MHz | 2535 MHz |
| Memory Clock | 1300 MHz 5.2 Gbps effective | 2250 MHz 18 Gbps effective |
| Memory Size | 128 GB | 8 GB |
| Memory Type | HBM3 | GDDR6 |
| Memory Bus Width | 8192 bit | 128 bit |
| Memory Bandwidth | 5.32 TB/s | 288.0 GB/s |
| Shading Units | 14592 | 4352 |
| TMUs | 912 | 136 |
| ROPs | 0 | 48 |
| RT Cores | Not listed | 34 |
| Tensor Cores | Not listed | 136 |
| Pixel Rate | 0 MPixel/s | 121.7 GPixel/s |
| Texture Rate | 1,915.2 GTexel/s | 344.8 GTexel/s |
| FP32 Performance | 61.29 TFLOPS | 22.06 TFLOPS |
| FP16 Performance | Not listed | 22.06 TFLOPS (1:1) |
| TDP | 750 W | 160 W |
| Slot Width | OAM Module | Dual-slot |
| Power Connectors | None | 1x 16-pin |
| Suggested PSU | 1150 W | 450 W |
| Bus Interface | PCIe 5.0 x16 | PCIe 4.0 x8 |
| Display Outputs | No outputs | 1x HDMI 2.1, 3x DisplayPort 1.4a |
| DirectX Support | N/A | 12 Ultimate (12_2) |
| OpenGL Support | N/A | 4.6 |
| Vulkan Support | N/A | 1.4 |
| Dimensions | Not listed | 240 mm x 111 mm x 40 mm |
| Release Date | 2023-12-05 | 2024-03-31 |
| Predecessor | Radeon Instinct | GeForce 30 |
| Successor | Not listed | GeForce 50 |
| Production Status | Not listed | End-of-life |
| Launch MSRP | Not listed | 399 USD |