AMD Instinct MI300A vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison

AMD
RADEON

AMD Instinct MI300A

CORE STATE Aqua Vanjaram
VRAM 128 GB
CLOCK SPEED 2100 MHz
TDP 750 W
BUS WIDTH 8192 bit
ARCHITECTURE CDNA 3.0
nm
PROCESS 5 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

GeForce RTX 4070 Ti SUPER AD102

CORE STATE AD102
VRAM 16 GB
CLOCK SPEED 2610 MHz
TDP 285 W
BUS WIDTH 256 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
6,269.5

Analysis: AMD Instinct MI300A vs NVIDIA GeForce RTX 4070 Ti SUPER AD102

Where Each One Wins

The AMD Instinct MI300A and NVIDIA GeForce RTX 4070 Ti SUPER AD102 occupy entirely separate segments of the GPU market, and the data reflects this split clearly. The MI300A is a compute-oriented accelerator with no display outputs, no graphics API support, and a 128 GB HBM3 memory pool. The RTX 4070 Ti SUPER AD102 is a consumer graphics card with full DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 support, plus three DisplayPort 1.4a outputs and one HDMI 2.1 output.

The MI300A wins on raw compute throughput. Its FP32 rating of 61.29 TFLOPS is 39% higher than the RTX 4070 Ti SUPER AD102's 44.10 TFLOPS. Texture rate also favors the AMD part: 1,915.2 GTexel/s versus 689.0 GTexel/s, a 2.8x advantage. Memory bandwidth is even more lopsided. The MI300A delivers 5.32 TB/s across an 8192-bit bus, while the NVIDIA card manages 672.3 GB/s over a 256-bit bus. That is roughly 7.9x more bandwidth for the AMD accelerator.

The RTX 4070 Ti SUPER AD102 wins where consumer features matter. It has 96 ROPs producing 250.6 GPixel/s, whereas the MI300A lists 0 ROPs and 0 MPixel/s. The NVIDIA card includes 66 RT cores and 264 tensor cores, features absent from the MI300A's specification sheet. The RTX card also carries a 285 W TDP against the MI300A's 750 W, and it requires a suggested 600 W PSU versus 1150 W for the AMD part. In the single recorded benchmark, 3DMark Steel Nomad DX12, the RTX 4070 Ti SUPER AD102 scores 6269.5, placing it in the 36th percentile of all GPUs in the database. The MI300A has no benchmark entries and sits at the 50th percentile with an average score of zero.

Architecture Differences

The two chips come from different design philosophies. The MI300A uses AMD's CDNA 3.0 architecture on a chip called Aqua Vanjaram, built on a 5 nm process at TSMC. It integrates 153,000 million transistors on a 1017 mm² die, yielding a transistor density of 150.4 million per mm². The RTX 4070 Ti SUPER AD102 uses NVIDIA's Ada Lovelace architecture on the AD102 chip, also fabricated on a 5 nm TSMC process. It packs 76,300 million transistors into a 609 mm² die, for 125.3 million transistors per mm². The MI300A crams roughly twice the transistor count into a die that is 67% larger.

Memory architecture diverges sharply. The MI300A uses 128 GB of HBM3 with an 8192-bit bus and a 5.32 TB/s bandwidth figure. The RTX 4070 Ti SUPER AD102 uses 16 GB of GDDR6X on a 256-bit bus, achieving 672.3 GB/s. The AMD part has 14592 shading units and 912 TMUs, while the NVIDIA part has 8448 shading units and 264 TMUs. The MI300A reports no RT cores, tensor cores, or pixel rate; the RTX card reports 66 RT cores, 264 tensor cores, and a 250.6 GPixel/s pixel rate.

Clock behavior also differs. The MI300A runs at a 1000 MHz base and 2100 MHz boost, with memory clocked at 1300 MHz (5.2 Gbps effective). The RTX 4070 Ti SUPER AD102 runs at 2340 MHz base and 2610 MHz boost, with memory at 1313 MHz (21 Gbps effective). The NVIDIA card boosts 24% higher than the AMD part, but the MI300A compensates with far more shading units and a wider memory bus. The MI300A also uses a PCIe 5.0 x16 interface, while the RTX card uses PCIe 4.0 x16.

Physical and power characteristics separate them further. The MI300A is an OAM Module with no power connectors and no display outputs. The RTX 4070 Ti SUPER AD102 is a triple-slot card measuring 310 mm by 140 mm by 61 mm, drawing power from a single 16-pin connector. The MI300A is rated at 750 W, the RTX card at 285 W. The AMD part has no listed APIs for DirectX, OpenGL, or Vulkan; the NVIDIA card supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

FAQ

Q: Which card has more FP32 compute power?

A: The AMD Instinct MI300A lists 61.29 TFLOPS FP32, which is 39% higher than the RTX 4070 Ti SUPER AD102's 44.10 TFLOPS.

Q: How do the memory systems compare?

A: The MI300A uses 128 GB of HBM3 with an 8192-bit bus and 5.32 TB/s bandwidth. The RTX 4070 Ti SUPER AD102 uses 16 GB of GDDR6X with a 256-bit bus and 672.3 GB/s bandwidth.

Q: Does the MI300A support graphics APIs?

A: No. The database lists DirectX, OpenGL, and Vulkan as N/A for the MI300A. The RTX 4070 Ti SUPER AD102 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: What is the power requirement difference?

A: The MI300A is rated at 750 W with a suggested PSU of 1150 W. The RTX 4070 Ti SUPER AD102 is rated at 285 W with a suggested PSU of 600 W.

Q: Which GPU has a recorded benchmark score?

A: Only the RTX 4070 Ti SUPER AD102 has a benchmark entry: 6269.5 in 3DMark Steel Nomad DX12, placing it in the 36th percentile. The MI300A has no benchmark scores recorded.

Q: What process nodes and die sizes do the two chips use?

A: Both use a 5 nm TSMC process. The MI300A's die is 1017 mm² with 153,000 million transistors; the RTX 4070 Ti SUPER AD102's die is 609 mm² with 76,300 million transistors.

Specification Differences

| Specification | AMD Instinct MI300A | NVIDIA GeForce RTX 4070 Ti SUPER AD102 |

|---|---|---|

| Architecture | CDNA 3.0 | Ada Lovelace |

| Chip | Aqua Vanjaram | AD102 |

| Transistors | 153,000 million | 76,300 million |

| Die size | 1017 mm² | 609 mm² |

| Transistor density | 150.4M / mm² | 125.3M / mm² |

| Base clock | 1000 MHz | 2340 MHz |

| Boost clock | 2100 MHz | 2610 MHz |

| Memory clock | 1300 MHz (5.2 Gbps effective) | 1313 MHz (21 Gbps effective) |

| Memory size | 128 GB | 16 GB |

| Memory type | HBM3 | GDDR6X |

| Memory bus | 8192 bit | 256 bit |

| Memory bandwidth | 5.32 TB/s | 672.3 GB/s |

| Shading units | 14592 | 8448 |

| TMUs | 912 | 264 |

| ROPs | 0 | 96 |

| RT cores | N/A | 66 |

| Tensor cores | N/A | 264 |

| Pixel rate | 0 MPixel/s | 250.6 GPixel/s |

| Texture rate | 1,915.2 GTexel/s | 689.0 GTexel/s |

| FP32 | 61.29 TFLOPS | 44.10 TFLOPS |

| FP16 | Not listed | 44.10 TFLOPS (1:1) |

| TDP | 750 W | 285 W |

| Slot width | OAM Module | Triple-slot |

| Power connectors | None | 1x 16-pin |

| Suggested PSU | 1150 W | 600 W |

| Bus interface | PCIe 5.0 x16 | PCIe 4.0 x16 |

| Display outputs | No outputs | 1x HDMI 2.1, 3x DisplayPort 1.4a |

| DirectX | N/A | 12 Ultimate (12_2) |

| OpenGL | N/A | 4.6 |

| Vulkan | N/A | 1.4 |

| Release date | 2023-12-05 | 2024-06-09 |

| Predecessor | Radeon Instinct | GeForce 30 |

| Successor | Not listed | GeForce 50 |

| Launch MSRP | Not listed | 799 USD |

| Production status | Not listed | End-of-life |

Head-to-Head Benchmarks

The database contains no direct head-to-head benchmark entries between the MI300A and the RTX 4070 Ti SUPER AD102. The only recorded performance score belongs to the NVIDIA card: 6269.5 in 3DMark Steel Nomad DX12, with an average benchmark score of 6270. Its nearest rivals in the database are the NVIDIA GeForce RTX 5070 Ti SUPER at an identical 6270 average score (0% delta), the AMD FirePro W600 at 6223 (0.8% delta), the NVIDIA Quadro K620 at 6282 (-0.2% delta), and the AMD Radeon R7 M350 at 6327 (-0.9% delta). The RTX 4070 Ti SUPER AD102 sits at the 36th percentile of all GPUs in the database.

The MI300A has no benchmark scores and no nearest rivals listed. Its percentile versus all GPUs is 50, but that figure is based on zero recorded results. The compute comparison therefore rests on specification data rather than measured performance. The MI300A leads in FP32 throughput by 17.19 TFLOPS, in texture rate by 1,226.2 GTexel/s, and in memory bandwidth by 4.65 TB/s. The RTX card leads in pixel rate by 250.6 GPixel/s, in boost clock by 510 MHz, and in base clock by 1340 MHz.

The RTX 4070 Ti SUPER AD102's nearest rival comparisons show how tight the consumer mid-range field is. It matches the RTX 5070 Ti SUPER exactly at 6270, trails the Quadro K620 by just 12 points, and leads the FirePro W600 by 47 points. Those deltas, ranging from -0.9% to 0.8%, place the card in a crowded performance band. The MI300A, by contrast, has no comparable data points in the database.

The Verdict

The AMD Instinct MI300A is a compute accelerator, not a graphics card. Its 128 GB HBM3 memory, 8192-bit bus, 5.32 TB/s bandwidth, 61.29 TFLOPS FP32, and 1,915.2 GTexel/s texture rate position it for workloads that demand massive memory throughput and raw compute. It has no display outputs, no graphics API support, no ROPs, and no pixel rate. The 750 W TDP and 1150 W suggested PSU confirm a data-center-oriented design.

The NVIDIA GeForce RTX 4070 Ti SUPER AD102 is a consumer graphics card with measurable graphics performance. Its 3DMark Steel Nomad DX12 score of 6269.5, 36th percentile ranking, and tight grouping against rivals within a 0.9% delta show a card that competes in the mainstream enthusiast segment. It brings 66 RT cores, 264 tensor cores, 250.6 GPixel/s pixel rate, full DirectX 12 Ultimate support, and a 285 W TDP. Its launch MSRP is 799 USD.

The recorded data points to a simple split: the MI300A for compute-heavy, memory-bound workloads without display requirements, and the RTX 4070 Ti SUPER AD102 for graphics rendering and consumer applications. The MI300A holds a 39% FP32 advantage and a 7.9x memory bandwidth advantage, while the RTX card is the only one of the two with any recorded benchmark result, any graphics API support, or any pixel output capability. Neither part can substitute for the other in its intended role.

DETAILED SPECIFICATIONS

SPECIFICATION
Instinct MI300A
RTX 4070 Ti SUPER AD102
Core Specs
Shading Units
14,592
8,448 -42.1%
Shaders
14,592
8,448 -42.1%
TMUs
912
264 -71.1%
ROPs
0
96 +∞%
Compute Units
228
—
SM Count
—
66
Clocks
Base Clock
1000 MHz
2340 MHz
Boost Clock
2100 MHz
2610 MHz
Memory Clock
1300 MHz 5.2 Gbps effective
1313 MHz 21 Gbps effective
Memory
Memory Size
128 GB
16 GB
VRAM (MB)
131,072
16,384 -87.5%
Memory Type
HBM3
GDDR6X
Memory Bus
8192 bit
256 bit
Bandwidth
5.32 TB/s
672.3 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
16 MB
48 MB
L3 Cache
256 MB
—
Performance
Pixel Rate
0 MPixel/s
250.6 GPixel/s
Texture Rate
1,915.2 GTexel/s
689.0 GTexel/s
FP32 (TFLOPS)
61.29 TFLOPS
44.10 TFLOPS
FP64 (TFLOPS)
30.64 TFLOPS (1:2)
689.0 GFLOPS (1:64)
FP16 (TFLOPS)
—
44.10 TFLOPS (1:1)
AI/RT
RT Cores
—
66
Tensor Cores
—
264
Matrix Cores
912
—
Power
TDP
750 W
285 W
TDP (W)
750
285 -62.0%
Suggested PSU
1150 W
600 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
CDNA 3.0
Ada Lovelace
GPU Name
Aqua Vanjaram
AD102
Generation
Instinct (MIx)
GeForce 40
Process Size
5 nm
5 nm
Transistors
153,000 million
76,300 million
Die Size
1017 mm²
609 mm²
Foundry
TSMC
TSMC
Density
150.4M / mm²
125.3M / mm²
AMD MCM
MCM
2
—
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
—
8.9
Shader Model
—
6.9
Physical
Slot Width
OAM Module
Triple-slot
Length
—
310 mm 12.2 inches
Height
—
140 mm 5.5 inches
Outputs
No outputs
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 5.0 x16
PCIe 4.0 x16
Other
Launch Price
—
799 USD
Production
—
End-of-life
Predecessor
Radeon Instinct
GeForce 30
Successor
—
GeForce 50
View Instinct MI300A Details View GeForce RTX 4070 Ti SUPER AD102 Details