NVIDIA B300 SXM6 AC vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison

NVIDIA
GEFORCE

NVIDIA B300 SXM6 AC

CORE STATE GB110
VRAM 288 GB
CLOCK SPEED 2032 MHz
TDP 1100 W
BUS WIDTH 8192 bit
ARCHITECTURE Blackwell Ultra
nm
PROCESS 5 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

RTX PRO 5000 72 GB Blackwell

CORE STATE GB202
VRAM 72 GB
CLOCK SPEED 2377 MHz
TDP 300 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
369,831
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
9,579.5
passmark_directx_10
N/A
175
passmark_directx_11
N/A
219
passmark_directx_12
N/A
78
passmark_directx_9
N/A
311
passmark_g2d
N/A
914
passmark_g3d
N/A
24,310
passmark_gpu_compute
N/A
15,667

Analysis: NVIDIA B300 SXM6 AC vs NVIDIA RTX PRO 5000 72 GB Blackwell

The NVIDIA B300 SXM6 AC and the NVIDIA RTX PRO 5000 72 GB Blackwell occupy different segments of the accelerator market. The B300 is a server module aimed at high-throughput compute, while the RTX PRO 5000 is a workstation card with display outputs and API support. The recorded data shows a clear performance hierarchy, but the two products are not directly comparable on the same benchmark suite. The B300 delivers a single Geekbench OpenCL score of 369,831, placing it at the 100th percentile of all GPUs in the database. The RTX PRO 5000 has an average benchmark score of 6,407, with its strongest result being a Passmark G3D score of 24,310 and a 3DMark Steel Nomad DX12 score of 9,579.5.

Head-to-Head Benchmarks

The B300 SXM6 AC dominates in raw compute throughput. Its Geekbench OpenCL score of 369,831 is the only benchmark recorded for this part, and it represents the top percentile in the database. The nearest rival to the B300 is the NVIDIA B200, which scores 345,482, a delta of 7 percent. The H200 NVL scores 334,891, which is 10.4 percent behind. AMD's Instinct MI300X scores 317,994, a 16.3 percent deficit. The NVIDIA L40S scores 295,763, which is 25 percent lower. These deltas show the B300 leading its closest competitor by a meaningful margin, and the gap widens when compared against the other accelerators in its peer group.

The RTX PRO 5000 does not have a Geekbench OpenCL result in the database. Its average benchmark score of 6,407 is derived from multiple Passmark tests and one 3DMark test. The highest Passmark result is G3D at 24,310, which is a substantial score for workstation graphics. The GPU compute score is 15,667, which is lower than the G3D score but still indicates strong compute capability. The DirectX 9 score is 311, DirectX 10 is 175, DirectX 11 is 219, and DirectX 12 is 78. The G2D score is 914, which reflects 2D desktop performance. The 3DMark Steel Nomad DX12 score is 9,579.5, which is a modern gaming and professional 3D workload.

Comparing the two directly is difficult because the B300 only has a compute benchmark and the RTX PRO 5000 only has graphics and compute benchmarks from different suites. The B300's OpenCL score of 369,831 is orders of magnitude higher than the RTX PRO 5000's Passmark GPU compute score of 15,667, but these tests are not equivalent. The B300 is designed for server-scale compute, while the RTX PRO 5000 is designed for workstation use. The data does not include a shared benchmark, so any head-to-head comparison must rely on architectural and specification differences rather than identical test results.

Where Each One Wins

The B300 SXM6 AC wins in raw compute density and memory bandwidth. It uses 288 GB of HBM3e memory with an 8192-bit bus and 8.19 TB/s of bandwidth. This memory configuration is far beyond the RTX PRO 5000's 72 GB of GDDR7 on a 384-bit bus with 1.34 TB/s. For large model training, inference, or scientific simulation, the B300's memory capacity and bandwidth are decisive. Its FP32 throughput is 76.99 TFLOPS, and FP16 is also 76.99 TFLOPS with a 1:1 ratio. The RTX PRO 5000 delivers 66.94 TFLOPS in both FP32 and FP16, which is lower but still substantial.

The B300 also has more shading units, 18,944 versus 14,080, and more texture mapping units, 592 versus 440. The B300 has 592 tensor cores, while the RTX PRO 5000 has 440 tensor cores. These counts favor the B300 in compute-heavy workloads. However, the RTX PRO 5000 has a higher boost clock, 2,377 MHz versus 2,032 MHz, and a higher base clock, 1,740 MHz versus 1,665 MHz. The RTX PRO 5000 also has 160 ROPs compared to the B300's 24 ROPs, which explains its higher pixel rate of 380.3 GPixel/s versus 48.77 GPixel/s. The RTX PRO 5000 wins in rasterization and pixel output, making it suitable for graphics rendering, display output, and workstation visualization.

The RTX PRO 5000 has 110 ray tracing cores, a feature the B300 does not list. This gives the RTX PRO 5000 a clear advantage in ray-traced workloads, such as architectural visualization or film rendering. The B300 has no display outputs, while the RTX PRO 5000 has 4x DisplayPort 2.1b outputs. The RTX PRO 5000 supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the B300 lists no API support. For any workload requiring a display or standard graphics APIs, the RTX PRO 5000 is the only option.

Architecture Differences

The B300 uses the GB110 chip and is classified under the Blackwell Ultra architecture, belonging to the Server Blackwell (Bxx) generation. The RTX PRO 5000 uses the GB202 chip and is classified under the Blackwell 2.0 architecture, belonging to the Blackwell PRO W (x000) generation. Both are manufactured by TSMC on a 5 nm process, but the die sizes differ significantly. The B300 has a die size of 1,628 mm², while the RTX PRO 5000 has a die size of 750 mm². The B300 integrates 208,000 million transistors, while the RTX PRO 5000 has 92,200 million transistors. The transistor density is 127.8 million per mm² for the B300 and 122.9 million per mm² for the RTX PRO 5000, which are close but not identical.

The B300 has a predecessor of Server Hopper and a successor of Server Rubin, while the RTX PRO 5000 has a predecessor of Workstation Ada and no listed successor. The release dates are close: the B300 was released on September 10, 2025, and the RTX PRO 5000 was released on October 20, 2025. Both are marked as Active in production status. The B300 is a server module with a slot width of SXM Module, while the RTX PRO 5000 is a dual-slot card with dimensions of 267 mm in length, 111 mm in height, and 40 mm in width.

The memory architectures are completely different. The B300 uses HBM3e, which is a high-bandwidth stacked memory design, while the RTX PRO 5000 uses GDDR7, which is a conventional discrete memory design. The B300's memory clock is 2000 MHz with 8 Gbps effective, while the RTX PRO 5000's memory clock is 1750 MHz with 28 Gbps effective. The effective data rate is higher on the RTX PRO 5000, but the bus width and capacity on the B300 produce far greater total bandwidth. The B300's 8192-bit bus is 21 times wider than the RTX PRO 5000's 384-bit bus.

Specification Differences

The two products differ in nearly every specification field. The B300 has 18,944 shading units, 592 TMUs, and 24 ROPs, while the RTX PRO 5000 has 14,080 shading units, 440 TMUs, and 160 ROPs. The B300 has no listed RT cores, while the RTX PRO 5000 has 110 RT cores. The B300 has 592 tensor cores, while the RTX PRO 5000 has 440 tensor cores.

The pixel rate is 48.77 GPixel/s for the B300 and 380.3 GPixel/s for the RTX PRO 5000. The texture rate is 1,202.9 GTexel/s for the B300 and 1,045.9 GTexel/s for the RTX PRO 5000. FP32 performance is 76.99 TFLOPS for the B300 and 66.94 TFLOPS for the RTX PRO 5000. FP16 performance is also 76.99 TFLOPS for the B300 and 66.94 TFLOPS for the RTX PRO 5000, both at a 1:1 ratio.

The TDP is a major differentiator. The B300 has a TDP of 1,100 W and a suggested PSU of 1,500 W. The RTX PRO 5000 has a TDP of 300 W and a suggested PSU of 700 W. The B300 uses an SXM module form factor with no display outputs, while the RTX PRO 5000 is a dual-slot card with a 1x 16-pin power connector and 4x DisplayPort 2.1b outputs. The bus interface is PCIe 6.0 x16 for the B300 and PCIe 5.0 x16 for the RTX PRO 5000.

The B300 has no listed API support for DirectX, OpenGL, or Vulkan, while the RTX PRO 5000 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The B300 has no listed dimensions, while the RTX PRO 5000 has a length of 267 mm, height of 111 mm, and width of 40 mm. The B300 has no launch MSRP, and neither product has a launch MSRP in the database.

FAQ

Q: Which GPU has higher FP32 compute performance?

A: The B300 SXM6 AC delivers 76.99 TFLOPS in FP32, while the RTX PRO 5000 delivers 66.94 TFLOPS. The B300 is ahead by 10.05 TFLOPS.

Q: What are the memory capacities of each card?

A: The B300 SXM6 AC has 288 GB of HBM3e memory, while the RTX PRO 5000 has 72 GB of GDDR7 memory.

Q: Which GPU supports ray tracing?

A: The RTX PRO 5000 has 110 RT cores, while the B300 SXM6 AC does not list any RT cores in the database.

Q: What is the difference in memory bandwidth?

A: The B300 SXM6 AC has a bandwidth of 8.19 TB/s, while the RTX PRO 5000 has a bandwidth of 1.34 TB/s.

Q: Which GPU has a higher boost clock?

A: The RTX PRO 5000 has a boost clock of 2,377 MHz, while the B300 SXM6 AC has a boost clock of 2,032 MHz.

Q: Do both GPUs support the same PCIe interface?

A: No. The B300 SXM6 AC uses PCIe 6.0 x16, while the RTX PRO 5000 uses PCIe 5.0 x16.

The Verdict

The data indicates that the B300 SXM6 AC is the superior choice for compute-heavy server workloads that require massive memory capacity and bandwidth. Its 288 GB of HBM3e memory, 8.19 TB/s bandwidth, and 76.99 TFLOPS FP32 performance place it at the 100th percentile of all GPUs in the database. Its nearest rivals, the B200 and H200 NVL, trail by 7 percent and 10.4 percent respectively. For training large models, processing large datasets, or running inference at scale, the B300 is the clear leader based on the recorded metrics.

The RTX PRO 5000 is the appropriate choice for workstation graphics, rendering, and any workload that requires display output or standard graphics APIs. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, and it has 4x DisplayPort 2.1b outputs. Its 110 RT cores enable ray tracing, and its 160 ROPs provide a pixel rate of 380.3 GPixel/s, which is far higher than the B300's 48.77 GPixel/s. The RTX PRO 5000 also has a lower TDP of 300 W compared to the B300's 1,100 W, making it feasible for a dual-slot workstation card.

The B300 has more shading units, TMUs, and tensor cores, but the RTX PRO 5000 has more ROPs, RT cores, and higher clock speeds. The B300 uses a server module form factor with no display outputs, while the RTX PRO 5000 is a dual-slot card with physical dimensions of 267 mm by 111 mm by 40 mm. The B300 uses PCIe 6.0 x16, while the RTX PRO 5000 uses PCIe 5.0 x16.

Users who need maximum compute throughput and memory capacity should select the B300 SXM6 AC. Users who need graphics rendering, ray tracing, display output, and standard API support should select the RTX PRO 5000 72 GB Blackwell. The two products serve different purposes, and the benchmark data reflects those purposes. The B300's single OpenCL score demonstrates dominance in compute, while the RTX PRO 5000's multiple Passmark and 3DMark scores demonstrate versatility in graphics and compute. Neither product is a substitute for the other.

DETAILED SPECIFICATIONS

SPECIFICATION
B300 SXM6 AC
RTX PRO 5000 72 GB Blackwell
Core Specs
Shading Units
18,944
14,080 -25.7%
Shaders
18,944
14,080 -25.7%
TMUs
592
440 -25.7%
ROPs
24
160 +566.7%
SM Count
148
110 -25.7%
Clocks
Base Clock
1665 MHz
1740 MHz
Boost Clock
2032 MHz
2377 MHz
Memory Clock
2000 MHz 8 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
288 GB
72 GB
VRAM (MB)
294,912
73,728 -75.0%
Memory Type
HBM3e
GDDR7
Memory Bus
8192 bit
384 bit
Bandwidth
8.19 TB/s
1.34 TB/s
Cache
L1 Cache
256 KB (per SM)
128 KB (per SM)
L2 Cache
126 MB
96 MB
Performance
Pixel Rate
48.77 GPixel/s
380.3 GPixel/s
Texture Rate
1,202.9 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
76.99 TFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
1,202.9 GFLOPS (1:64)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
76.99 TFLOPS (1:1)
66.94 TFLOPS (1:1)
AI/RT
RT Cores
—
110
Tensor Cores
592
440 -25.7%
Power
TDP
1100 W
300 W
TDP (W)
1,100
300 -72.7%
Suggested PSU
1500 W
700 W
Power Connectors
—
1x 16-pin
Architecture
Architecture
Blackwell Ultra
Blackwell 2.0
GPU Name
GB110
GB202
Generation
Server Blackwell (Bxx)
Blackwell PRO W (x000)
Process Size
5 nm
5 nm
Transistors
208,000 million
92,200 million
Die Size
1628 mm²
750 mm²
Foundry
TSMC
TSMC
Density
127.8M / mm²
122.9M / mm²
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
10.3
12.0
Shader Model
—
6.9
Physical
Slot Width
SXM Module
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
No outputs
4x DisplayPort 2.1b
Bus Interface
PCIe 6.0 x16
PCIe 5.0 x16
Other
Production
Active
Active
Predecessor
Server Hopper
Workstation Ada
Successor
Server Rubin
—
View B300 SXM6 AC Details View RTX PRO 5000 72 GB Blackwell Details