NVIDIA B300 SXM6 AC vs NVIDIA RTX 4000 SFF Ada Generation Comparison
NVIDIA B300 SXM6 AC
RTX 4000 SFF Ada Generation
PERFORMANCE BENCHMARKS
Analysis: NVIDIA B300 SXM6 AC vs NVIDIA RTX 4000 SFF Ada Generation
Head-to-Head Benchmarks
The recorded data contains one shared benchmark between the two accelerators: Geekbench OpenCL. The NVIDIA B300 SXM6 AC posts a score of 369,831, while the NVIDIA RTX 4000 SFF Ada Generation achieves 124,812. This produces a delta of 196.3%, meaning the B300 SXM6 AC is roughly three times faster in this compute workload. The B300 SXM6 AC wins the head-to-head contest 1 to 0.
To contextualize the B300 SXM6 AC result, its nearest rival in the database is the NVIDIA B200 with an average score of 345,482, a 7% gap. The H200 NVL trails by 10.4% at 334,891. The AMD Instinct MI300X sits at 317,994, which is 16.3% behind. The L40S, a common server workhorse, scores 295,763, a 25% deficit. These deltas show the B300 SXM6 AC not merely edging out competition but establishing a clear tier above the prior generation's flagship accelerators.
The RTX 4000 SFF Ada Generation, by contrast, sits in a different performance class. Its average benchmark score across available tests is 117,088. Its nearest rival, the NVIDIA GB10, scores 117,393, a negligible 0.3% difference. The AMD Radeon PRO W7700 is 1.6% ahead at 118,976. The Tesla V100 SXM2 16 GB scores 114,395, putting the RTX 4000 SFF 2.4% ahead, and the RTX A5500 Mobile scores 113,944, a 2.8% gap in favor of the SFF card. These margins indicate the RTX 4000 SFF sits in a tightly contested mid-range band where small percentage swings separate products.
The OpenCL delta of 196.3% between the two reviewed cards dwarfs every rival comparison in the database. Even the largest gap among the B300 SXM6 AC's rivals, the 25% lead over the L40S, is small relative to the chasm between the two cards in this review. The RTX 4000 SFF's Vulkan score of 109,364 has no corresponding B300 SXM6 AC figure, so no head-to-head comparison exists for that API.
Architecture Differences
The two cards occupy opposite ends of NVIDIA's design spectrum. The B300 SXM6 AC uses the GB110 chip, built on the Blackwell Ultra architecture, part of the Server Blackwell generation. The RTX 4000 SFF Ada Generation uses the AD104 chip, built on Ada Lovelace, belonging to the Workstation Ada generation. Both are fabricated by TSMC on a 5 nm process, but the similarity ends there.
The transistor counts differ enormously. The B300 SXM6 AC packs 208,000 million transistors across a 1628 mm² die, yielding a density of 127.8M per mm². The RTX 4000 SFF contains 35,800 million transistors on a 294 mm² die, with a density of 121.8M per mm². The density figures are close, but the absolute scale is not: the B300 SXM6 AC has nearly six times the transistor budget.
Memory configurations diverge completely. The B300 SXM6 AC carries 288 GB of HBM3e across an 8192-bit bus, delivering 8.19 TB/s of bandwidth. Memory clock is 2000 MHz with 8 Gbps effective. The RTX 4000 SFF has 20 GB of GDDR6 on a 160-bit bus, providing 280.0 GB/s. Its memory clock is 1750 MHz with 14 Gbps effective. The bandwidth gap is 29 to 1 in favor of the server part.
Compute resources follow the same pattern. The B300 SXM6 AC has 18,944 shading units, 592 TMUs, and 24 ROPs. It also carries 592 tensor cores, with no RT core count listed. The RTX 4000 SFF has 6,144 shading units, 192 TMUs, and 64 ROPs. It has 48 RT cores and 192 tensor cores. The B300 SXM6 AC's pixel rate is 48.77 GPixel/s, while the RTX 4000 SFF achieves 99.84 GPixel/s. The texture rates are 1,202.9 GTexel/s versus 299.5 GTexel/s.
Clock speeds tell a story of design priorities. The B300 SXM6 AC runs at 1665 MHz base and 2032 MHz boost. The RTX 4000 SFF runs at 720 MHz base and 1560 MHz boost. Despite lower clocks, the RTX 4000 SFF doubles the pixel rate due to its ROP count, but the B300 SXM6 AC quadruples the texture rate through sheer shader and TMU volume.
Power envelopes could not be more different. The B300 SXM6 AC has a TDP of 1100 W with a suggested PSU of 1500 W. The RTX 4000 SFF consumes 70 W with a 250 W suggested PSU. The SFF card draws no external power connectors; the B300 SXM6 AC uses an SXM module slot. The physical formats differ: the B300 SXM6 AC is an SXM Module, while the RTX 4000 SFF is a dual-slot card measuring 168 mm in length and 69 mm in height.
Where Each One Wins
The B300 SXM6 AC wins decisively in raw compute throughput. Its FP32 rating of 76.99 TFLOPS is four times the RTX 4000 SFF's 19.17 TFLOPS. FP16 performance matches FP32 at a 1:1 ratio on both cards, so the same multiplier applies. The B300 SXM6 AC's 8.19 TB/s memory bandwidth enables feeding those shader units at scale, a necessity for large model training or inference workloads.
The B300 SXM6 AC also wins on memory capacity. 288 GB versus 20 GB is a 14.4x difference. This allows the server part to hold entire large language models or massive datasets in memory without host transfers. The bus width of 8192 bits versus 160 bits reinforces this advantage. The B300 SXM6 AC also supports PCIe 6.0 x16, while the RTX 4000 SFF uses PCIe 4.0 x16, doubling the theoretical host interface bandwidth.
The RTX 4000 SFF wins on areas that matter for workstation deployment. Its pixel rate of 99.84 GPixel/s is over double the B300 SXM6 AC's 48.77 GPixel/s. This suggests rasterization throughput, though the B300 SXM6 AC lists no API support (DirectX, OpenGL, Vulkan all marked N/A), while the RTX 4000 SFF supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. The SFF card has four mini-DisplayPort 1.4a outputs; the B300 SXM6 AC has no display outputs. The RTX 4000 SFF also includes 48 RT cores, enabling hardware-accelerated ray tracing, a feature absent from the B300 SXM6 AC's listed specifications.
The RTX 4000 SFF wins on power efficiency and physical integration. At 70 W, it draws 6.4% of the B300 SXM6 AC's power. Its dual-slot form factor and lack of power connectors allow installation in standard workstations. The 168 mm length fits compact chassis. The SFF card's 95th percentile ranking versus all GPUs indicates strong performance relative to the broader market, even while sitting far below the B300 SXM6 AC's 100th percentile ranking.
FAQ
Q: Which card has higher memory bandwidth?
A: The NVIDIA B300 SXM6 AC has 8.19 TB/s of bandwidth, while the NVIDIA RTX 4000 SFF Ada Generation has 280.0 GB/s. The B300 SXM6 AC leads by a factor of roughly 29.
Q: How much faster is the B300 SXM6 AC in the shared OpenCL benchmark?
A: The B300 SXM6 AC scores 369,831 versus 124,812 for the RTX 4000 SFF, a delta of 196.3% in favor of the B300 SXM6 AC.
Q: Does the RTX 4000 SFF support display outputs?
A: Yes, it has four mini-DisplayPort 1.4a outputs. The B300 SXM6 AC has no display outputs.
Q: What is the power consumption difference?
A: The B300 SXM6 AC has a TDP of 1100 W with a suggested PSU of 1500 W. The RTX 4000 SFF has a TDP of 70 W with a suggested PSU of 250 W.
Q: Which card has ray tracing cores?
A: The RTX 4000 SFF Ada Generation has 48 RT cores. The B300 SXM6 AC does not list RT cores in its specifications.
Q: What memory types do the two cards use?
A: The B300 SXM6 AC uses 288 GB of HBM3e on an 8192-bit bus. The RTX 4000 SFF uses 20 GB of GDDR6 on a 160-bit bus.
The Verdict
The data supports a clear functional split. The NVIDIA B300 SXM6 AC is designed for server-scale compute where raw throughput, memory capacity, and bandwidth dominate. Its 196.3% OpenCL lead over the RTX 4000 SFF, combined with 76.99 TFLOPS FP32 performance and 288 GB of HBM3e, positions it for large-scale AI training and inference. Its 100th percentile ranking among all GPUs in the database confirms top-tier standing. Users with workloads that fit within 288 GB of memory and require maximum compute density should select the B300 SXM6 AC.
The NVIDIA RTX 4000 SFF Ada Generation serves workstation and desktop tasks. Its 95th percentile ranking shows strong general performance, but its 19.17 TFLOPS FP32 and 280.0 GB/s bandwidth place it in a different class. The presence of RT cores, display outputs, and full API support (DirectX 12 Ultimate, OpenGL 4.6, Vulkan 1.4) makes it suitable for graphics, visualization, and ray-traced workloads. The 70 W power draw and dual-slot form factor allow deployment in conventional workstations where the B300 SXM6 AC's 1100 W TDP and SXM module format would be impractical.
The B300 SXM6 AC wins 1 benchmark; the RTX 4000 SFF wins 0. But benchmark wins do not tell the whole story. The B300 SXM6 AC's pixel rate of 48.77 GPixel/s is lower than the RTX 4000 SFF's 99.84 GPixel/s, and the server card lacks display outputs entirely. For compute, the B300 SXM6 AC is the overwhelming choice. For graphics, the RTX 4000 SFF is the only viable option in this comparison.
The transistor density figures are close (127.8M vs 121.8M per mm²), indicating both chips use their silicon efficiently. The scale difference, however, is decisive. The B300 SXM6 AC's 208,000 million transistors versus 35,800 million means the server part has fundamentally more resources to draw upon. The release dates reflect this: the RTX 4000 SFF launched in March 2023, while the B300 SXM6 AC arrived in September 2025, a generation and a half apart.
Specification Differences
| Field | NVIDIA B300 SXM6 AC | NVIDIA RTX 4000 SFF Ada Generation |
|---|---|---|
| Architecture | Blackwell Ultra | Ada Lovelace |
| Generation | Server Blackwell (Bxx) | Workstation Ada |
| Chip | GB110 | AD104 |
| Transistors | 208,000 million | 35,800 million |
| Die Size | 1628 mm² | 294 mm² |
| Transistor Density | 127.8M / mm² | 121.8M / mm² |
| Base Clock | 1665 MHz | 720 MHz |
| Boost Clock | 2032 MHz | 1560 MHz |
| Memory Clock | 2000 MHz 8 Gbps effective | 1750 MHz 14 Gbps effective |
| Memory Size | 288 GB | 20 GB |
| Memory Type | HBM3e | GDDR6 |
| Memory Bus Width | 8192 bit | 160 bit |
| Memory Bandwidth | 8.19 TB/s | 280.0 GB/s |
| Shading Units | 18944 | 6144 |
| TMUs | 592 | 192 |
| ROPs | 24 | 64 |
| RT Cores | Not listed | 48 |
| Tensor Cores | 592 | 192 |
| Pixel Rate | 48.77 GPixel/s | 99.84 GPixel/s |
| Texture Rate | 1,202.9 GTexel/s | 299.5 GTexel/s |
| FP32 Performance | 76.99 TFLOPS | 19.17 TFLOPS |
| FP16 Performance | 76.99 TFLOPS (1:1) | 19.17 TFLOPS (1:1) |
| TDP | 1100 W | 70 W |
| Slot Width | SXM Module | Dual-slot |
| Power Connectors | Not listed | None |
| Suggested PSU | 1500 W | 250 W |
| Bus Interface | PCIe 6.0 x16 | PCIe 4.0 x16 |
| Display Outputs | No outputs | 4x mini-DisplayPort 1.4a |
| DirectX Support | N/A | 12 Ultimate (12_2) |
| OpenGL Support | N/A | 4.6 |
| Vulkan Support | N/A | 1.4 |
| Length | Not listed | 168 mm (6.6 inches) |
| Height | Not listed | 69 mm (2.7 inches) |
| Release Date | 2025-09-10 | 2023-03-20 |
| Predecessor | Server Hopper | Workstation Ampere |
| Successor | Server Rubin | Blackwell PRO W |
| Geekbench OpenCL Score | 369831 | 124812 |
| Percentile vs All GPUs | 100 | 95 |
| Average Benchmark Score | 369831 | 117088 |