NVIDIA B300 SXM6 AC vs NVIDIA GeForce RTX 3050 A Mobile Comparison

NVIDIA
GEFORCE

NVIDIA B300 SXM6 AC

CORE STATE GB110
VRAM 288 GB
CLOCK SPEED 2032 MHz
TDP 1100 W
BUS WIDTH 8192 bit
ARCHITECTURE Blackwell Ultra
nm
PROCESS 5 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce RTX 3050 A Mobile

CORE STATE GA106
VRAM 4 GB
CLOCK SPEED 1343 MHz
TDP 45 W
BUS WIDTH 128 bit
ARCHITECTURE Ampere
nm
PROCESS 8 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

geekbench_opencl
369,831
52,998
passmark_directx_10
N/A
61
passmark_directx_11
N/A
94
passmark_directx_12
N/A
55
passmark_directx_9
N/A
152
passmark_g2d
N/A
526
passmark_g3d
N/A
11,664
passmark_gpu_compute
N/A
4,419

Analysis: NVIDIA B300 SXM6 AC vs NVIDIA GeForce RTX 3050 A Mobile

Where Each One Wins

The benchmark data splits cleanly along use-case lines. The NVIDIA B300 SXM6 AC dominates the single recorded OpenCL benchmark with a score of 369,831, while the NVIDIA GeForce RTX 3050 A Mobile posts 52,998 in the same test. That 597.8% delta is not a close contest; it is a generational and market-segment gap expressed in raw compute throughput.

The B300 SXM6 AC wins the only head-to-head benchmark available. Its Geekbench OpenCL score places it at the 100th percentile among all GPUs in the database, meaning no recorded part scores higher. The RTX 3050 A Mobile sits at the 44th percentile, which puts it in the middle of the pack, competitive with much older desktop cards like the GeForce GTX 460 v2 (0% delta) and the Quadro P2200 (0.7% ahead). The B300 SXM6 AC, by contrast, leads the NVIDIA B200 by 7%, the H200 NVL by 10.4%, the AMD Instinct MI300X by 16.3%, and the L40S by 25%.

For workloads that stress raw FP32 compute, memory bandwidth, or tensor throughput, the B300 SXM6 AC is the clear winner. The RTX 3050 A Mobile has no benchmark victories in the recorded data. Its strengths lie elsewhere: it is a mobile part with a 45 W TDP, designed for laptops where power draw and physical footprint matter more than absolute performance. The B300 SXM6 AC is an SXM module with a 1100 W TDP, intended for server racks with dedicated cooling and power delivery. These are not competing products in the same market; they are adjacent points in NVIDIA's lineup serving different physical and thermal constraints.

Architecture Differences

The two GPUs come from different architectural generations and foundries. The B300 SXM6 AC uses the GB110 chip on the Blackwell Ultra architecture, built on TSMC's 5 nm process. It packs 208,000 million transistors into a 1628 mm² die, yielding a transistor density of 127.8 million per mm². The RTX 3050 A Mobile uses the GA106 chip on the Ampere architecture, built on Samsung's 8 nm process. That die holds 12,000 million transistors across 276 mm², for a density of 43.5 million per mm². The B300 SXM6 AC has over 17 times the transistor count and nearly six times the die area, but its density advantage is also substantial: roughly three times as many transistors per square millimeter.

Memory systems are entirely different. The B300 SXM6 AC uses 288 GB of HBM3e on an 8192-bit bus, delivering 8.19 TB/s of bandwidth. The RTX 3050 A Mobile uses 4 GB of GDDR6 on a 128-bit bus, with 192.0 GB/s of bandwidth. That is a 42.7 times bandwidth difference in absolute terms, which directly explains the OpenCL score gap. Compute resources follow suit: the B300 SXM6 AC has 18,944 shading units, 592 TMUs, and 592 tensor cores, while the RTX 3050 A Mobile has 1,792 shading units, 56 TMUs, 56 tensor cores, and 14 RT cores. The B300 has no RT core count listed, but its FP32 throughput of 76.99 TFLOPS dwarfs the mobile part's 4.813 TFLOPS by a factor of 16.

Clock speeds tell a different story. The B300 SXM6 AC runs at a 1665 MHz base and 2032 MHz boost, while the RTX 3050 A Mobile runs at 1065 MHz base and 1343 MHz boost. The server part clocks higher despite its massive size, which is possible because it has a 1100 W power budget and external cooling. The mobile part stays at 45 W, a 24.4 times lower power envelope. The B300 also uses a PCIe 6.0 x16 interface, while the mobile part uses PCIe 4.0 x8. Display outputs differ too: the B300 has no outputs, the RTX 3050 A Mobile is listed as portable device dependent. API support is another divergence: the B300 reports N/A for DirectX, OpenGL, and Vulkan, while the RTX 3050 A Mobile supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

The Verdict

The data supports a straightforward choice based on workload. For any compute-heavy task that fits in a server context, the B300 SXM6 AC is the only option between these two. Its 369,831 OpenCL score is 597.8% above the RTX 3050 A Mobile's 52,998, and it sits at the 100th percentile in the database. The nearest rival, the NVIDIA B200, trails by 7%, and the H200 NVL trails by 10.4%. The B300 also leads the AMD Instinct MI300X by 16.3% and the L40S by 25%. If the task is large-scale inference, training, or scientific compute that can use 288 GB of HBM3e and 8.19 TB/s of bandwidth, the B300 is the clear pick.

The RTX 3050 A Mobile is a different product for a different physical environment. Its 45 W TDP, IGP slot width, and lack of power connectors make it suitable for laptops where the B300 cannot physically fit. Its 4 GB of GDDR6 and 192.0 GB/s bandwidth are modest, and its benchmark scores reflect that: the average benchmark score is 8,746, and it sits at the 44th percentile. But it supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the B300 reports no graphics API support. For a portable device that needs to drive a display and run consumer graphics workloads, the RTX 3050 A Mobile is the functional choice despite its lower raw compute.

Neither part is a substitute for the other. The B300 wins every recorded benchmark, but it cannot be installed in a laptop, has no display outputs, and requires a 1500 W suggested PSU. The RTX 3050 A Mobile is end-of-life, while the B300 is active production. The B300's predecessor is Server Hopper and its successor is Server Rubin, placing it in a clear server roadmap. The RTX 3050 A Mobile's predecessor is GeForce 20 Mobile and it has no successor listed, indicating a terminated mobile line.

FAQ

Q: Which GPU has the higher OpenCL benchmark score?

A: The NVIDIA B300 SXM6 AC scores 369,831 in Geekbench OpenCL, while the NVIDIA GeForce RTX 3050 A Mobile scores 52,998. The B300 leads by 597.8%.

Q: How much memory does each GPU have?

A: The B300 SXM6 AC has 288 GB of HBM3e on an 8192-bit bus. The RTX 3050 A Mobile has 4 GB of GDDR6 on a 128-bit bus.

Q: What are the power requirements for each?

A: The B300 SXM6 AC has a 1100 W TDP and a suggested PSU of 1500 W. The RTX 3050 A Mobile has a 45 W TDP and no power connectors.

Q: Which GPU supports DirectX 12?

A: The RTX 3050 A Mobile supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The B300 SXM6 AC reports N/A for all three graphics APIs.

Q: How does the B300 compare to its nearest rival, the NVIDIA B200?

A: The B300 scores 369,831 versus the B200's 345,482 average, a 7% advantage. The H200 NVL trails by 10.4%, the AMD Instinct MI300X by 16.3%, and the L40S by 25%.

Q: What is the production status of each GPU?

A: The B300 SXM6 AC is listed as active production with a release date of September 10, 2025. The RTX 3050 A Mobile is end-of-life with a release date of December 31, 2023.

Head-to-Head Benchmarks

The only shared benchmark in the database is Geekbench OpenCL, and the result is lopsided. The B300 SXM6 AC scores 369,831 against the RTX 3050 A Mobile's 52,998, a 597.8% delta. That is not a marginal win; it is a 6.98 times raw score advantage. The B300's nearest rival, the B200, scores 345,482, which is 7% lower. The H200 NVL at 334,891 is 10.4% lower. The AMD Instinct MI300X at 317,994 is 16.3% lower. The L40S at 295,763 is 25% lower. The RTX 3050 A Mobile's nearest rivals are far closer: the GeForce GTX 460 v2 at 8,743 is 0% away, the Quadro P2200 at 8,686 is 0.7% lower, the Radeon R9 M265X at 8,851 is 1.2% higher, and the Radeon Pro WX 5100 at 8,863 is 1.3% higher.

The B300 also holds advantages in every architectural metric that feeds OpenCL performance. Its FP32 throughput of 76.99 TFLOPS is 16 times the RTX 3050 A Mobile's 4.813 TFLOPS. Texture rate is 1,202.9 GTexel/s versus 75.21 GTexel/s, a 15.9 times difference. Pixel rate is 48.77 GPixel/s versus 42.98 GPixel/s, a much smaller 13.5% gap. Memory bandwidth tells the real story: 8.19 TB/s versus 192.0 GB/s. The RTX 3050 A Mobile has a higher pixel rate per TDP, but that is not a meaningful comparison across such different power envelopes.

The RTX 3050 A Mobile's additional benchmarks, PassMark DirectX 9 through 12 and GPU compute, have no B300 equivalents in the database. Its PassMark G3D score is 11,664, GPU compute is 4,419, and DirectX 9 is 152. These numbers place it in the mid-range of the database, consistent with its 44th percentile rank. The B300 has no such scores recorded, so no direct comparison is possible for those tests. The OpenCL result is the only point of overlap, and it is decisive.

Specification Differences

The two GPUs differ in nearly every listed specification. The B300 SXM6 AC uses the GB110 chip on Blackwell Ultra, built on TSMC's 5 nm process with 208,000 million transistors on a 1628 mm² die. The RTX 3050 A Mobile uses the GA106 chip on Ampere, built on Samsung's 8 nm process with 12,000 million transistors on a 276 mm² die. Transistor density is 127.8M per mm² versus 43.5M per mm².

Clock speeds: the B300 runs at 1665 MHz base and 2032 MHz boost. The RTX 3050 A Mobile runs at 1065 MHz base and 1343 MHz boost. Memory clocks are 2000 MHz (8 Gbps effective) for the B300 versus 1500 MHz (12 Gbps effective) for the mobile part.

Memory: 288 GB HBM3e on 8192-bit bus with 8.19 TB/s bandwidth, versus 4 GB GDDR6 on 128-bit bus with 192.0 GB/s bandwidth.

Compute units: 18,944 shading units, 592 TMUs, 24 ROPs, 592 tensor cores for the B300. The RTX 3050 A Mobile has 1,792 shading units, 56 TMUs, 32 ROPs, 14 RT cores, and 56 tensor cores.

Rates: the B300 has 48.77 GPixel/s pixel rate and 1,202.9 GTexel/s texture rate. The RTX 3050 A Mobile has 42.98 GPixel/s and 75.21 GTexel/s. FP32 is 76.99 TFLOPS for the B300, 4.813 TFLOPS for the mobile part. Both list FP16 at 1:1 ratio with FP32.

Power and physical: the B300 has a 1100 W TDP, SXM Module slot width, no power connectors listed, and a 1500 W suggested PSU. The RTX 3050 A Mobile has a 45 W TDP, IGP slot width, no power connectors, and no suggested PSU. Bus interface: PCIe 6.0 x16 for the B300, PCIe 4.0 x8 for the mobile part. Display outputs: none for the B300, portable device dependent for the RTX 3050 A Mobile. APIs: the B300 reports N/A for DirectX, OpenGL, and Vulkan; the RTX 3050 A Mobile supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Production status: active for the B300, end-of-life for the RTX 3050 A Mobile. Release dates: September 10, 2025 for the B300, December 31, 2023 for the mobile part.

DETAILED SPECIFICATIONS

SPECIFICATION
B300 SXM6 AC
RTX 3050 A Mobile
Core Specs
Shading Units
18,944
1,792 -90.5%
Shaders
18,944
1,792 -90.5%
TMUs
592
56 -90.5%
ROPs
24
32 +33.3%
SM Count
148
14 -90.5%
Clocks
Base Clock
1665 MHz
1065 MHz
Boost Clock
2032 MHz
1343 MHz
Memory Clock
2000 MHz 8 Gbps effective
1500 MHz 12 Gbps effective
Memory
Memory Size
288 GB
4 GB
VRAM (MB)
294,912
4,096 -98.6%
Memory Type
HBM3e
GDDR6
Memory Bus
8192 bit
128 bit
Bandwidth
8.19 TB/s
192.0 GB/s
Cache
L1 Cache
256 KB (per SM)
128 KB (per SM)
L2 Cache
126 MB
2 MB
Performance
Pixel Rate
48.77 GPixel/s
42.98 GPixel/s
Texture Rate
1,202.9 GTexel/s
75.21 GTexel/s
FP32 (TFLOPS)
76.99 TFLOPS
4.813 TFLOPS
FP64 (TFLOPS)
1,202.9 GFLOPS (1:64)
75.21 GFLOPS (1:64)
FP16 (TFLOPS)
76.99 TFLOPS (1:1)
4.813 TFLOPS (1:1)
AI/RT
RT Cores
—
14
Tensor Cores
592
56 -90.5%
Power
TDP
1100 W
45 W
TDP (W)
1,100
45 -95.9%
Suggested PSU
1500 W
—
Power Connectors
—
None
Architecture
Architecture
Blackwell Ultra
Ampere
GPU Name
GB110
GA106
Generation
Server Blackwell (Bxx)
GeForce 30 Mobile
Process Size
5 nm
8 nm
Transistors
208,000 million
12,000 million
Die Size
1628 mm²
276 mm²
Foundry
TSMC
Samsung
Density
127.8M / mm²
43.5M / mm²
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
10.3
8.6
Shader Model
—
6.9
Physical
Slot Width
SXM Module
IGP
Outputs
No outputs
Portable Device Dependent
Bus Interface
PCIe 6.0 x16
PCIe 4.0 x8
Other
Production
Active
End-of-life
Predecessor
Server Hopper
GeForce 20 Mobile
Successor
Server Rubin
—
View B300 SXM6 AC Details View GeForce RTX 3050 A Mobile Details