AMD Radeon RX 6450M vs NVIDIA B300 SXM6 AC Comparison

AMD
RADEON

AMD Radeon RX 6450M

CORE STATE Navi 24
VRAM 4 GB
CLOCK SPEED 2460 MHz
TDP 50 W
BUS WIDTH 64 bit
ARCHITECTURE RDNA 2.0
nm
PROCESS 6 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

B300 SXM6 AC

CORE STATE GB110
VRAM 288 GB
CLOCK SPEED 2032 MHz
TDP 1100 W
BUS WIDTH 8192 bit
ARCHITECTURE Blackwell Ultra
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
N/A
369,831

Analysis: AMD Radeon RX 6450M vs NVIDIA B300 SXM6 AC

Head-to-Head Benchmarks

The database contains no direct head-to-head benchmark comparisons between the AMD Radeon RX 6450M and the NVIDIA B300 SXM6 AC. However, the NVIDIA B300 SXM6 AC has a recorded Geekbench OpenCL score of 369,831, while the AMD Radeon RX 6450M has no benchmark entries in the database. The B300 SXM6 AC sits at the 100th percentile among all GPUs, while the RX 6450M sits at the 50th percentile.

For context, the B300 SXM6 AC outperforms its nearest rivals by substantial margins. It is 7% ahead of the NVIDIA B200, which scores 345,482. It leads the NVIDIA H200 NVL by 10.4%, with that card scoring 334,891. Against the AMD Instinct MI300X, the B300 SXM6 AC holds a 16.3% advantage, as the MI300X scores 317,994. The gap widens to 25% when compared to the NVIDIA L40S, which scores 295,763.

These delta percentages translate into raw score differences. The 7% edge over the B200 represents roughly 24,349 points. The 10.4% lead over the H200 NVL corresponds to approximately 34,940 points. The 16.3% advantage over the MI300X is about 51,837 points. The 25% margin over the L40S equals roughly 74,068 points. The data indicates that the B300 SXM6 AC delivers the highest OpenCL performance among these server-class accelerators.

The RX 6450M, with no benchmark scores recorded, cannot be directly compared in this metric. Its 50th percentile placement suggests mid-pack positioning among all GPUs, but the lack of recorded measurements means the database offers no numerical basis for a performance comparison. The B300 SXM6 AC, by contrast, occupies the absolute top percentile, indicating it outperforms essentially all other recorded GPUs in the database.

FAQ

Q: What is the Geekbench OpenCL score of the NVIDIA B300 SXM6 AC?

A: The B300 SXM6 AC records a Geekbench OpenCL score of 369,831, which places it at the 100th percentile among all GPUs.

Q: How does the B300 SXM6 AC compare to the NVIDIA B200?

A: The B300 SXM6 AC is 7% ahead of the B200 in average benchmark score. The B200 scores 345,482, while the B300 SXM6 AC scores 369,831.

Q: What advantage does the B300 SXM6 AC hold over the AMD Instinct MI300X?

A: The B300 SXM6 AC leads the MI300X by 16.3%. The MI300X records an average score of 317,994, compared to 369,831 for the B300 SXM6 AC.

Q: Does the AMD Radeon RX 6450M have any recorded benchmark scores?

A: No, the RX 6450M has no benchmark entries in the database. Its percentile ranking is 50 among all GPUs, but its average benchmark score is listed as zero.

Q: What is the difference in transistor density between the two GPUs?

A: The B300 SXM6 AC has a transistor density of 127.8 million transistors per square millimeter, while the RX 6450M has a density of 50.5 million transistors per square millimeter.

Q: Which GPU has the higher boost clock?

A: The RX 6450M has a boost clock of 2460 MHz, while the B300 SXM6 AC has a boost clock of 2032 MHz.

Architecture Differences

The AMD Radeon RX 6450M uses the Navi 24 chip built on the RDNA 2.0 architecture. It belongs to the Navi Mobile generation within the RX 6000M series. The chip is fabricated on a 6 nm process at TSMC. The B300 SXM6 AC uses the GB110 chip built on the Blackwell Ultra architecture, belonging to the Server Blackwell generation. It is fabricated on a 5 nm process, also at TSMC.

Transistor counts differ dramatically. The RX 6450M contains 5,400 million transistors on a die size of 107 mm². The B300 SXM6 AC contains 208,000 million transistors on a die size of 1628 mm². The transistor density reflects this: the RX 6450M packs 50.5 million transistors per mm², while the B300 SXM6 AC packs 127.8 million per mm².

The RX 6450M includes 12 ray tracing cores specifically designed for real-time ray tracing workloads. The B300 SXM6 AC does not list ray tracing cores, but it includes 592 tensor cores dedicated to AI and matrix operations. The RX 6450M has no tensor cores listed.

Shader resources differ substantially. The RX 6450M has 768 shading units, 48 texture mapping units, and 32 render output units. The B300 SXM6 AC has 18,944 shading units, 592 texture mapping units, and only 24 render output units. The B300 SXM6 AC's low ROP count relative to its shader count indicates a compute-oriented design rather than a rasterization-focused one.

Memory architecture is completely different. The RX 6450M uses 4 GB of GDDR6 memory on a 64-bit bus, delivering 128.0 GB/s bandwidth. The B300 SXM6 AC uses 288 GB of HBM3e memory on an 8192-bit bus, delivering 8.19 TB/s bandwidth. The bus width difference is a factor of 128.

API support diverges sharply. The RX 6450M supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The B300 SXM6 AC lists N/A for DirectX, OpenGL, and Vulkan, indicating it is not designed for traditional graphics APIs.

Specification Differences

The two GPUs differ across nearly every specification field in the database.

Process node: the RX 6450M uses 6 nm, while the B300 SXM6 AC uses 5 nm.

Base clock: the RX 6450M runs at 2000 MHz, while the B300 SXM6 AC runs at 1665 MHz. Boost clock: the RX 6450M reaches 2460 MHz, while the B300 SXM6 AC reaches 2032 MHz. The RX 6450M also has a game clock of 2220 MHz, which the B300 SXM6 AC does not list.

Memory clock: the RX 6450M operates at 2000 MHz with 16 Gbps effective speed. The B300 SXM6 AC operates at 2000 MHz with 8 Gbps effective speed. Memory size: 4 GB versus 288 GB. Memory type: GDDR6 versus HBM3e. Bus width: 64 bit versus 8192 bit. Bandwidth: 128.0 GB/s versus 8.19 TB/s.

Shading units: 768 versus 18,944. Texture mapping units: 48 versus 592. Render output units: 32 versus 24. Ray tracing cores: 12 versus null. Tensor cores: null versus 592.

Pixel rate: the RX 6450M delivers 78.72 GPixel/s, while the B300 SXM6 AC delivers 48.77 GPixel/s. Texture rate: the RX 6450M delivers 118.1 GTexel/s, while the B300 SXM6 AC delivers 1,202.9 GTexel/s.

FP32 performance: the RX 6450M delivers 3.779 TFLOPS, while the B300 SXM6 AC delivers 76.99 TFLOPS. FP16 performance: the RX 6450M delivers 7.557 TFLOPS at a 2:1 ratio, while the B300 SXM6 AC delivers 76.99 TFLOPS at a 1:1 ratio.

TDP: the RX 6450M draws 50 W, while the B300 SXM6 AC draws 1100 W. The B300 SXM6 AC suggests a 1500 W power supply. The RX 6450M has no suggested PSU listed. Slot width: the RX 6450M is an IGP form factor, while the B300 SXM6 AC uses an SXM Module. Power connectors: the RX 6450M requires none, while the B300 SXM6 AC lists no connectors.

Bus interface: the RX 6450M uses PCIe 4.0 x4, while the B300 SXM6 AC uses PCIe 6.0 x16. Display outputs: the RX 6450M is portable device dependent, while the B300 SXM6 AC has no outputs.

Release dates: the RX 6450M was released on January 3, 2023, while the B300 SXM6 AC was released on September 10, 2025. The RX 6450M's predecessor is Polaris Mobile, while the B300 SXM6 AC's predecessor is Server Hopper. The B300 SXM6 AC lists a successor, Server Rubin, while the RX 6450M does not.

The Verdict

The recorded data separates these two GPUs into entirely different categories. The AMD Radeon RX 6450M is a low-power mobile graphics solution. Its 50 W TDP, IGP form factor, and lack of power connectors indicate it is designed for thin portable devices. The NVIDIA B300 SXM6 AC is a high-power server accelerator. Its 1100 W TDP, SXM module form factor, and 1500 W suggested PSU place it firmly in data center territory.

Performance measurements confirm this split. The B300 SXM6 AC scores 369,831 in Geekbench OpenCL and sits at the 100th percentile. The RX 6450M has no recorded score and sits at the 50th percentile. The B300 SXM6 AC leads its nearest rival, the B200, by 7%, and extends that lead to 25% over the L40S. These margins indicate it is among the fastest accelerators in the database.

The RX 6450M does hold advantages in specific areas. Its boost clock of 2460 MHz exceeds the B300 SXM6 AC's 2032 MHz. Its pixel rate of 78.72 GPixel/s is higher than the B300 SXM6 AC's 48.77 GPixel/s. Its 32 ROPs outnumber the B300 SXM6 AC's 24. These figures suggest rasterization-oriented design, but the lack of benchmark data prevents quantifying its real-world performance.

The B300 SXM6 AC dominates in compute throughput. Its FP32 output of 76.99 TFLOPS is roughly 20 times the RX 6450M's 3.779 TFLOPS. Its texture rate of 1,202.9 GTexel/s is roughly 10 times the RX 6450M's 118.1 GTexel/s. Its memory bandwidth of 8.19 TB/s is 64 times the RX 6450M's 128.0 GB/s. These differences reflect the fundamental purpose of each product.

Where Each One Wins

The AMD Radeon RX 6450M wins in power efficiency and mobile suitability. Its 50 W TDP allows deployment in portable devices without dedicated power connectors. Its IGP slot width and portable-device-dependent display outputs confirm this role. Its higher boost clock of 2460 MHz and game clock of 2220 MHz suggest it can sustain respectable frequencies within its power envelope. Its support for DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 means it can run standard graphics workloads.

The NVIDIA B300 SXM6 AC wins in raw compute performance. Its Geekbench OpenCL score of 369,831 places it at the 100th percentile, ahead of the B200 by 7%, the H200 NVL by 10.4%, the MI300X by 16.3%, and the L40S by 25%. Its 76.99 TFLOPS FP32 performance, 1,202.9 GTexel/s texture rate, and 8.19 TB/s memory bandwidth position it for massive parallel workloads. Its 592 tensor cores indicate AI acceleration capability. Its 288 GB of HBM3e memory provides capacity for large models.

The B300 SXM6 AC also wins in transistor technology. Its 127.8 million transistors per mm² density exceeds the RX 6450M's 50.5 million per mm². Its 208,000 million total transistors dwarf the RX 6450M's 5,400 million. Its 1628 mm² die size is over 15 times larger than the RX 6450M's 107 mm².

The RX 6450M wins in pixel throughput. Its 78.72 GPixel/s rate tops the B300 SXM6 AC's 48.77 GPixel/s. Combined with 32 ROPs versus 24, this indicates stronger traditional rasterization output per clock. The RX 6450M also wins in clock speed, with a 2460 MHz boost versus 2032 MHz.

The B300 SXM6 AC wins in bus interface. Its PCIe 6.0 x16 connection provides substantially more host bandwidth than the RX 6450M's PCIe 4.0 x4. The B300 SXM6 AC also wins in FP16 throughput, matching its FP32 at 76.99 TFLOPS with a 1:1 ratio, while the RX 6450M's FP16 runs at half rate.

For users selecting between these two, the choice depends entirely on workload. Portable gaming or low-power graphics favor the RX 6450M. Server compute, AI training, or large-scale data processing favor the B300 SXM6 AC. The data shows no meaningful overlap in their intended usage.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 6450M
B300 SXM6 AC
Core Specs
Shading Units
768
18,944 +2366.7%
Shaders
768
18,944 +2366.7%
TMUs
48
592 +1133.3%
ROPs
32
24 -25.0%
Compute Units
12
—
SM Count
—
148
Clocks
Base Clock
2000 MHz
1665 MHz
Boost Clock
2460 MHz
2032 MHz
Game Clock
2220 MHz
—
Memory Clock
2000 MHz 16 Gbps effective
2000 MHz 8 Gbps effective
Memory
Memory Size
4 GB
288 GB
VRAM (MB)
4,096
294,912 +7100.0%
Memory Type
GDDR6
HBM3e
Memory Bus
64 bit
8192 bit
Bandwidth
128.0 GB/s
8.19 TB/s
Cache
L1 Cache
128 KB per Array
256 KB (per SM)
L2 Cache
1024 KB
126 MB
L3 Cache
16 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
78.72 GPixel/s
48.77 GPixel/s
Texture Rate
118.1 GTexel/s
1,202.9 GTexel/s
FP32 (TFLOPS)
3.779 TFLOPS
76.99 TFLOPS
FP64 (TFLOPS)
236.2 GFLOPS (1:16)
1,202.9 GFLOPS (1:64)
FP16 (TFLOPS)
7.557 TFLOPS (2:1)
76.99 TFLOPS (1:1)
AI/RT
RT Cores
12
—
Tensor Cores
—
592
Power
TDP
50 W
1100 W
TDP (W)
50
1,100 +2100.0%
Suggested PSU
—
1500 W
Power Connectors
None
—
Architecture
Architecture
RDNA 2.0
Blackwell Ultra
GPU Name
Navi 24
GB110
Generation
Navi Mobile (RX 6000M)
Server Blackwell (Bxx)
Process Size
6 nm
5 nm
Transistors
5,400 million
208,000 million
Die Size
107 mm²
1628 mm²
Foundry
TSMC
TSMC
Density
50.5M / mm²
127.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
—
OpenGL
4.6
—
Vulkan
1.4
—
OpenCL
2.2
3.0
CUDA
—
10.3
Shader Model
6.8
—
Physical
Slot Width
IGP
SXM Module
Outputs
Portable Device Dependent
No outputs
Bus Interface
PCIe 4.0 x4
PCIe 6.0 x16
Other
Production
Active
Active
Predecessor
Polaris Mobile
Server Hopper
Successor
—
Server Rubin
View Radeon RX 6450M Details View B300 SXM6 AC Details