NVIDIA A100 SXM4 40 GB vs NVIDIA B300 SXM6 AC Comparison

NVIDIA
GEFORCE

NVIDIA A100 SXM4 40 GB

CORE STATE GA100
VRAM 40 GB
CLOCK SPEED 1410 MHz
TDP 400 W
BUS WIDTH 5120 bit
ARCHITECTURE Ampere
nm
PROCESS 7 nm
LAUNCH DATE 2020
VS
NVIDIA
GEFORCE

B300 SXM6 AC

CORE STATE GB110
VRAM 288 GB
CLOCK SPEED 2032 MHz
TDP 1100 W
BUS WIDTH 8192 bit
ARCHITECTURE Blackwell Ultra
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
201,096
369,831
geekbench_vulkan
173,198
N/A

Analysis: NVIDIA A100 SXM4 40 GB vs NVIDIA B300 SXM6 AC

# NVIDIA B300 SXM6 AC vs NVIDIA A100 SXM4 40 GB

The NVIDIA B300 SXM6 AC is the clear performance leader, outperforming the NVIDIA A100 SXM4 40 GB by 83.9% in the only shared benchmark, and it also carries a massive memory and bandwidth advantage that positions it for entirely different workloads. The A100 SXM4 40 GB, while still a capable performer at the 98th percentile of all GPUs, is a previous-generation part that has reached end-of-life status, whereas the B300 sits at the 100th percentile with an active production status. For any workload where raw compute throughput and memory capacity are paramount, the B300 is the definitive choice; the A100 remains relevant only in scenarios where its lower power envelope and legacy software ecosystem are critical.

Where Each One Wins

The B300 SXM6 AC wins decisively in every measurable category from the data. Its Geekbench OpenCL score of 369,831 dwarfs the A100's 201,096, a 83.9% advantage that reflects the generational leap in compute capability. The B300 also holds a 100th percentile ranking among all GPUs, meaning it outperforms every other GPU in the database, while the A100 sits at the 98th percentile. In single-threaded compute performance, the B300's FP32 throughput of 76.99 TFLOPS is nearly four times the A100's 19.49 TFLOPS, making it the obvious winner for any FP32-heavy workload such as scientific simulation or data processing.

The A100 SXM4 40 GB does register a win in one specific area: FP16 compute. Its 77.97 TFLOPS FP16 (4:1) output slightly exceeds the B300's 76.99 TFLOPS FP16 (1:1). However, this is a narrow victory with important caveats. The A100 achieves this via a 4:1 ratio, meaning it uses reduced-precision tensor operations to reach that number, while the B300 achieves its figure at a 1:1 ratio, indicating true full-rate FP16 performance. For workloads requiring accurate FP16, the B300 is effectively equal or superior, while the A100's advantage only appears in approximate-compute modes.

In terms of memory, the B300 wins outright with 288 GB of HBM3e versus the A100's 40 GB of HBM2e, a 7.2x capacity difference. Memory bandwidth tells the same story: 8.19 TB/s versus 1.56 TB/s, a 5.25x advantage. The B300 also wins on texture rate (1,202.9 GTexel/s vs 609.1 GTexel/s) and transistor count (208,000 million vs 54,200 million), though the A100's pixel rate of 225.6 GPixel/s is actually higher than the B300's 48.77 GPixel/s, a quirk of the B300's 24 ROPs versus the A100's 160 ROPs.

Architecture Differences

The B300 SXM6 AC is built on the Blackwell Ultra architecture with the GB110 chip, fabricated on a 5 nm process at TSMC. The A100 SXM4 40 GB uses the older Ampere architecture with the GA100 chip, on a 7 nm process also at TSMC. This process node difference — 5 nm versus 7 nm — is a primary driver of the performance gap, allowing the B300 to pack 208,000 million transistors into a 1628 mm² die, compared to the A100's 54,200 million transistors on a 826 mm² die. The transistor density tells the story: 127.8M per mm² for the B300 versus 65.6M per mm² for the A100, nearly a 2x improvement in packing efficiency.

The B300 features 18,944 shading units, 592 TMUs, and 592 tensor cores, while the A100 has 6,912 shading units, 432 TMUs, and 432 tensor cores. The B300's shading unit count is 2.74x higher, and its tensor core count is 1.37x higher, indicating a design optimized for both general compute and AI acceleration. Both parts have no RT cores, as they are server-focused accelerators without ray tracing hardware.

Memory architecture differs fundamentally. The B300 uses 288 GB of HBM3e with an 8192-bit bus, while the A100 uses 40 GB of HBM2e with a 5120-bit bus. The B300's memory clock runs at 2000 MHz (8 Gbps effective), significantly faster than the A100's 1215 MHz (2.4 Gbps effective). The B300 also uses PCIe 6.0 x16, whereas the A100 uses PCIe 4.0 x16 — a two-generation gap in host interface bandwidth. Neither card has display outputs, and both are SXM modules, but the B300 has a TDP of 1100 W with a suggested PSU of 1500 W, while the A100 draws 400 W with an 800 W suggested PSU.

Head-to-Head Benchmarks

The only direct benchmark available is Geekbench OpenCL, and the result is lopsided. The B300 SXM6 AC scores 369,831, while the A100 SXM4 40 GB scores 201,096, giving the B300 an 83.9% advantage. This is not a marginal improvement; it is a near-doubling of compute throughput in a widely-used cross-platform benchmark. To contextualize, the B300's nearest rival, the NVIDIA B200, scores 345,482 (7% lower), and the H200 NVL scores 334,891 (10.4% lower). The B300 beats the AMD Instinct MI300X (317,994) by 16.3% and the L40S (295,763) by 25%. The A100's nearest rivals are far closer: the RTX 5000 Ada Generation scores 184,664 (1.3% lower), the A100 SXM4 80 GB scores 183,725 (1.9% lower), and the RTX PRO 5000 Blackwell scores 182,109 (2.8% lower). The A100 actually beats the Tesla V100S PCIe 32 GB by 3.7% (which scores 194,415), showing that while the A100 is competitive with its immediate peers, it is in a completely different performance class than the B300.

The FP32 compute figures reinforce this gap. The B300 delivers 76.99 TFLOPS, which is 3.95x the A100's 19.49 TFLOPS. For workloads that rely on single-precision floating point — common in scientific computing, data analytics, and certain AI inference tasks — this is a transformative difference. The texture rate also favors the B300 at 1,202.9 GTexel/s versus 609.1 GTexel/s, a 97.5% advantage. The only benchmark metric where the A100 leads is pixel rate, where its 225.6 GPixel/s exceeds the B300's 48.77 GPixel/s, but this is unlikely to matter for server workloads that do not render to a display.

FAQ

Q: Which GPU has higher raw compute performance?

A: The NVIDIA B300 SXM6 AC, with an FP32 throughput of 76.99 TFLOPS versus the A100's 19.49 TFLOPS. In Geekbench OpenCL, the B300 scores 369,831 versus 201,096, an 83.9% difference.

Q: How do the memory capacities compare?

A: The B300 has 288 GB of HBM3e memory, while the A100 has 40 GB of HBM2e. Memory bandwidth is 8.19 TB/s for the B300 versus 1.56 TB/s for the A100.

Q: Is the A100 better at any compute type?

A: The A100 shows a higher FP16 figure of 77.97 TFLOPS (4:1) compared to the B300's 76.99 TFLOPS (1:1). However, the A100's 4:1 ratio indicates reduced-precision operation, while the B300's 1:1 ratio means full-rate FP16, making the B300 effectively equal or superior for accurate FP16 workloads.

Q: What are the architecture generations of each GPU?

A: The B300 uses Blackwell Ultra architecture (GB110 chip) on a 5 nm process, while the A100 uses Ampere architecture (GA100 chip) on a 7 nm process. The B300 was released in September 2025; the A100 was released in May 2020.

Q: Which GPU is still in production?

A: The B300 SXM6 AC is listed as Active in production, while the A100 SXM4 40 GB is End-of-life. The B300's predecessor is Server Hopper, and its successor is Server Rubin; the A100's predecessor is Tesla Turing, and its successor is Server Ada.

Q: How does power consumption differ?

A: The B300 has a TDP of 1100 W with a suggested PSU of 1500 W, while the A100 has a TDP of 400 W with a suggested PSU of 800 W. The A100 uses no power connectors, while the B300's connector type is not specified.

Specification Differences

| Specification | NVIDIA B300 SXM6 AC | NVIDIA A100 SXM4 40 GB |

|---|---|---|

| Architecture | Blackwell Ultra | Ampere |

| Chip | GB110 | GA100 |

| Process Node | 5 nm | 7 nm |

| Transistors | 208,000 million | 54,200 million |

| Die Size | 1628 mm² | 826 mm² |

| Transistor Density | 127.8M / mm² | 65.6M / mm² |

| Base Clock | 1665 MHz | 1095 MHz |

| Boost Clock | 2032 MHz | 1410 MHz |

| Memory | 288 GB HBM3e | 40 GB HBM2e |

| Memory Bus | 8192 bit | 5120 bit |

| Memory Bandwidth | 8.19 TB/s | 1.56 TB/s |

| Shading Units | 18,944 | 6,912 |

| TMUs | 592 | 432 |

| ROPs | 24 | 160 |

| Tensor Cores | 592 | 432 |

| FP32 Performance | 76.99 TFLOPS | 19.49 TFLOPS |

| FP16 Performance | 76.99 TFLOPS (1:1) | 77.97 TFLOPS (4:1) |

| Pixel Rate | 48.77 GPixel/s | 225.6 GPixel/s |

| Texture Rate | 1,202.9 GTexel/s | 609.1 GTexel/s |

| TDP | 1100 W | 400 W |

| Suggested PSU | 1500 W | 800 W |

| Bus Interface | PCIe 6.0 x16 | PCIe 4.0 x16 |

| Production Status | Active | End-of-life |

| Release Date | 2025-09-10 | 2020-05-13 |

The Verdict

The data is unambiguous: the NVIDIA B300 SXM6 AC is the superior GPU for virtually every compute-intensive application. Its 83.9% lead in Geekbench OpenCL, 3.95x advantage in FP32 throughput, and 5.25x memory bandwidth advantage make it the definitive choice for AI training, large-scale scientific simulation, and data center workloads that demand maximum performance. The 288 GB memory capacity alone enables models and datasets that simply cannot fit in the A100's 40 GB, and the HBM3e memory type provides a generation-ahead bandwidth profile. The B300's 100th percentile ranking confirms it is the top-performing GPU in the entire database.

The A100 SXM4 40 GB should only be considered in specific legacy or power-constrained scenarios. Its 400 W TDP is less than half the B300's 1100 W, making it suitable for deployments with strict power budgets. Its 98th percentile ranking and competitive standing against the RTX 5000 Ada Generation (1.3% faster) and A100 SXM4 80 GB (1.9% faster) show it remains a solid mid-tier option, but it is not in the same performance class as the B300. The A100's end-of-life status further diminishes its appeal for new deployments, as software optimization and driver support will eventually shift to current-generation hardware. For organizations requiring maximum compute density and future-proofing, the B300 SXM6 AC is the only rational choice based on the available data.

DETAILED SPECIFICATIONS

SPECIFICATION
A100 SXM4 40 GB
B300 SXM6 AC
Core Specs
Shading Units
6,912
18,944 +174.1%
Shaders
6,912
18,944 +174.1%
TMUs
432
592 +37.0%
ROPs
160
24 -85.0%
SM Count
108
148 +37.0%
Clocks
Base Clock
1095 MHz
1665 MHz
Boost Clock
1410 MHz
2032 MHz
Memory Clock
1215 MHz 2.4 Gbps effective
2000 MHz 8 Gbps effective
Memory
Memory Size
40 GB
288 GB
VRAM (MB)
40,960
294,912 +620.0%
Memory Type
HBM2e
HBM3e
Memory Bus
5120 bit
8192 bit
Bandwidth
1.56 TB/s
8.19 TB/s
Cache
L1 Cache
192 KB (per SM)
256 KB (per SM)
L2 Cache
40 MB
126 MB
Performance
Pixel Rate
225.6 GPixel/s
48.77 GPixel/s
Texture Rate
609.1 GTexel/s
1,202.9 GTexel/s
FP32 (TFLOPS)
19.49 TFLOPS
76.99 TFLOPS
FP64 (TFLOPS)
9.746 TFLOPS (1:2)
1,202.9 GFLOPS (1:64)
FP16 (TFLOPS)
77.97 TFLOPS (4:1)
76.99 TFLOPS (1:1)
AI/RT
Tensor Cores
432
592 +37.0%
BF16
311.84 TFLOPS (16:1)
—
TF32
155.92 TFLOPs (8:1)
—
Power
TDP
400 W
1100 W
TDP (W)
400
1,100 +175.0%
Suggested PSU
800 W
1500 W
Power Connectors
None
—
Architecture
Architecture
Ampere
Blackwell Ultra
GPU Name
GA100
GB110
Generation
Server Ampere (Axx)
Server Blackwell (Bxx)
Process Size
7 nm
5 nm
Transistors
54,200 million
208,000 million
Die Size
826 mm²
1628 mm²
Foundry
TSMC
TSMC
Density
65.6M / mm²
127.8M / mm²
API Support
OpenCL
3.0
3.0
CUDA
8.0
10.3
Physical
Slot Width
SXM Module
SXM Module
Outputs
No outputs
No outputs
Bus Interface
PCIe 4.0 x16
PCIe 6.0 x16
Other
Production
End-of-life
Active
Predecessor
Tesla Turing
Server Hopper
Successor
Server Ada
Server Rubin
View A100 SXM4 40 GB Details View B300 SXM6 AC Details