NVIDIA A100 PCIe 40 GB vs NVIDIA B300 SXM6 AC Comparison
NVIDIA A100 PCIe 40 GB
B300 SXM6 AC
PERFORMANCE BENCHMARKS
Analysis: NVIDIA A100 PCIe 40 GB vs NVIDIA B300 SXM6 AC
# Head-to-Head Benchmarks
The benchmark data presents a single head-to-head comparison between the NVIDIA B300 SXM6 AC and the NVIDIA A100 PCIe 40 GB, and the result is decisive. In the Geekbench OpenCL test, the B300 SXM6 AC scores 369,831 against the A100 PCIe 40 GB's 178,627. That is a delta of 107 percent — meaning the B300 SXM6 AC more than doubles the A100's raw compute output in this workload. The A100 PCIe 40 GB does not win a single benchmark in this comparison; the wins tally stands at 1 for the B300 SXM6 AC and 0 for the A100.
Context from the nearest-rival data reinforces the magnitude of this gap. The B300 SXM6 AC sits at the 100th percentile among all GPUs in the database, with an average benchmark score of 369,831. Its closest competitor, the NVIDIA B200, averages 345,482 — a 7 percent deficit. The NVIDIA H200 NVL trails by 10.4 percent at 334,891, while the AMD Instinct MI300X is 16.3 percent behind at 317,994. The NVIDIA L40S is 25 percent back at 295,763. The A100 PCIe 40 GB, by contrast, sits at the 97th percentile with an average score of 162,504 across its two benchmark entries (OpenCL and Vulkan). Its nearest rivals are clustered tightly: the NVIDIA RTX 4500 Ada Generation scores 166,094 (2.2 percent ahead), the NVIDIA RTX A5500 scores 165,217 (1.6 percent ahead), the AMD Radeon PRO W7800 scores 164,894 (1.4 percent ahead), and the AMD Radeon Pro W6800X scores 160,671 (1.1 percent behind).
What this means is that the B300 SXM6 AC is not merely faster than the A100 — it operates in a different performance stratum. The 107 percent delta between the two is roughly seven times larger than the gap between the A100 and its nearest rival. In practical terms, a workload that takes one hour on the A100 would take about 29 minutes on the B300 SXM6 AC, assuming perfect scaling. The data does not offer a second benchmark test for the B300, so the OpenCL result is the only direct comparison available, but it is unambiguous in its verdict.
# Architecture Differences
The two accelerators come from different architectural generations and process technologies. The B300 SXM6 AC is built on the Blackwell Ultra architecture with the GB110 chip, fabricated on a 5 nm process at TSMC. The A100 PCIe 40 GB uses the Ampere architecture with the GA100 chip, on a 7 nm process, also from TSMC. The transistor counts reflect the generational leap: the B300 packs 208,000 million transistors on a 1628 mm² die, while the A100 has 54,200 million transistors on an 826 mm² die. This works out to a transistor density of 127.8 million per square millimeter for the B300 versus 65.6 million for the A100 — roughly double the density.
Memory configuration differs substantially. The B300 SXM6 AC carries 288 GB of HBM3e memory on an 8192-bit bus, delivering 8.19 TB/s of bandwidth. The A100 PCIe 40 GB has 40 GB of HBM2e memory on a 5120-bit bus, with 1.56 TB/s of bandwidth. The B300 provides over five times the memory capacity and more than five times the bandwidth. Memory clock speeds also differ: the B300 runs at 2000 MHz with 8 Gbps effective, while the A100 runs at 1215 MHz with 2.4 Gbps effective.
Compute resources scale accordingly. The B300 SXM6 AC has 18,944 shading units, 592 texture mapping units, and 592 tensor cores, but only 24 ROPs. The A100 has 6,912 shading units, 432 TMUs, 432 tensor cores, and 160 ROPs. The B300's ROP count is notably low relative to its shading units — a design choice that suggests it prioritizes compute throughput over rasterization. The A100's higher ROP count (160 versus 24) gives it a pixel rate of 225.6 GPixel/s, compared to the B300's 48.77 GPixel/s. Texture rate favors the B300, however: 1,202.9 GTexel/s versus 609.1 GTexel/s.
Peak floating-point performance tells the compute story. The B300 SXM6 AC delivers 76.99 TFLOPS in both FP32 and FP16 (at a 1:1 ratio). The A100 delivers 19.49 TFLOPS in FP32 and 77.97 TFLOPS in FP16, but at a 4:1 ratio — meaning the FP16 figure is achieved via specialized tensor operations rather than native 1:1 throughput. For FP32, the B300 is nearly 4 times faster. For FP16, the A100's peak is technically higher but achieved through a different mechanism.
Power and physical specifications diverge sharply. The B300 SXM6 AC has a TDP of 1100 W with a suggested PSU of 1500 W, and it uses an SXM module form factor with PCIe 6.0 x16 connectivity. The A100 PCIe 40 GB is a dual-slot card with a 250 W TDP, an 8-pin EPS power connector, a suggested PSU of 600 W, and PCIe 4.0 x16. The A100's physical dimensions are 267 mm in length and 111 mm in height. The B300 lists no dimensions. Both have no display outputs.
The B300 SXM6 AC was released in September 2025 and is currently marked as Active production. The A100 PCIe 40 GB was released in June 2020 and is End-of-life. The B300's predecessor is listed as Server Hopper with a successor of Server Rubin. The A100's predecessor is Tesla Turing with a successor of Server Ada. Neither has a launch MSRP listed in the data.
# The Verdict
The data is unambiguous: the NVIDIA B300 SXM6 AC is the superior performer in every measured metric that matters for compute workloads. It doubles the A100's OpenCL score, offers 5.6 times the memory bandwidth, nearly 4 times the FP32 throughput, and a 100th percentile ranking versus the A100's 97th. The B300 also brings architectural advantages in transistor density and memory technology that point to better long-term efficiency per unit of work.
However, the A100 PCIe 40 GB is not without a role in the data. Its 250 W TDP is less than a quarter of the B300's 1100 W, making it a far more modest power draw. It also has a higher pixel rate (225.6 GPixel/s versus 48.77 GPixel/s) and a higher ROP count (160 versus 24), which suggests it retains an edge in rasterization-style workloads — though neither card has display outputs, so this is likely irrelevant for most deployments. The A100's dual-slot PCIe form factor is also more flexible for existing server infrastructure compared to the B300's SXM module.
For new deployments where raw compute is the priority, the B300 SXM6 AC is the clear choice from the data. Its 107 percent lead over the A100 in OpenCL, combined with its massive memory advantage, makes it the appropriate selection for large-scale AI training, inference, and HPC workloads. The A100 PCIe 40 GB, being end-of-life, is a legacy option that the benchmark results show is decisively outclassed. The data does not support choosing the A100 for performance reasons; only its lower power envelope and standard PCIe form factor give it any practical advantage in the comparison.
# Specification Differences
The following specifications differ between the two accelerators:
- Architecture: Blackwell Ultra versus Ampere
- Chip: GB110 versus GA100
- Process node: 5 nm versus 7 nm
- Transistors: 208,000 million versus 54,200 million
- Die size: 1628 mm² versus 826 mm²
- Transistor density: 127.8M / mm² versus 65.6M / mm²
- Base clock: 1665 MHz versus 765 MHz
- Boost clock: 2032 MHz versus 1410 MHz
- Memory clock: 2000 MHz (8 Gbps effective) versus 1215 MHz (2.4 Gbps effective)
- Memory size: 288 GB versus 40 GB
- Memory type: HBM3e versus HBM2e
- Memory bus width: 8192 bit versus 5120 bit
- Memory bandwidth: 8.19 TB/s versus 1.56 TB/s
- Shading units: 18,944 versus 6,912
- TMUs: 592 versus 432
- ROPs: 24 versus 160
- Tensor cores: 592 versus 432
- Pixel rate: 48.77 GPixel/s versus 225.6 GPixel/s
- Texture rate: 1,202.9 GTexel/s versus 609.1 GTexel/s
- FP32: 76.99 TFLOPS versus 19.49 TFLOPS
- FP16: 76.99 TFLOPS (1:1) versus 77.97 TFLOPS (4:1)
- TDP: 1100 W versus 250 W
- Slot width: SXM Module versus Dual-slot
- Power connectors: None versus 8-pin EPS
- Suggested PSU: 1500 W versus 600 W
- Bus interface: PCIe 6.0 x16 versus PCIe 4.0 x16
- Dimensions: Not listed versus 267 mm / 111 mm
- Production status: Active versus End-of-life
- Release date: 2025-09-10 versus 2020-06-21
- Predecessor: Server Hopper versus Tesla Turing
- Successor: Server Rubin versus Server Ada
- Geekbench OpenCL score: 369,831 versus 178,627
- Percentile vs all GPUs: 100 versus 97
- Average benchmark score: 369,831 versus 162,504
# FAQ
Q: How much faster is the NVIDIA B300 SXM6 AC than the A100 PCIe 40 GB in the available benchmark?
A: In the Geekbench OpenCL test, the B300 SXM6 AC scores 369,831 while the A100 PCIe 40 GB scores 178,627, resulting in a 107 percent delta in favor of the B300.
Q: What memory capacity and bandwidth does each card offer?
A: The B300 SXM6 AC has 288 GB of HBM3e memory with 8.19 TB/s bandwidth on an 8192-bit bus. The A100 PCIe 40 GB has 40 GB of HBM2e memory with 1.56 TB/s bandwidth on a 5120-bit bus.
Q: Which card has a higher FP32 throughput?
A: The B300 SXM6 AC delivers 76.99 TFLOPS FP32, compared to the A100 PCIe 40 GB's 19.49 TFLOPS — a difference of nearly 4 times in favor of the B300.
Q: Are the FP16 capabilities comparable between the two?
A: The B300 SXM6 AC provides 76.99 TFLOPS FP16 at a 1:1 ratio with FP32. The A100 PCIe 40 GB provides 77.97 TFLOPS FP16, but at a 4:1 ratio, meaning it requires specialized tensor operations to reach that peak.
Q: What are the power consumption differences?
A: The B300 SXM6 AC has a TDP of 1100 W with a suggested PSU of 1500 W. The A100 PCIe 40 GB has a TDP of 250 W with a suggested PSU of 600 W.
Q: Which card has a higher percentile ranking among all GPUs?
A: The B300 SXM6 AC is at the 100th percentile, while the A100 PCIe 40 GB is at the 97th percentile. The B300's average benchmark score is 369,831; the A100's is 162,504.