Intel Arc Graphics 48EU Mobile vs NVIDIA GeForce RTX 4060 Ti AD104 Comparison

Intel
GPU

Intel Arc Graphics 48EU Mobile

CORE STATE Meteor Lake
VRAM System Shared
CLOCK SPEED 1800 MHz
TDP 28 W
BUS WIDTH System Shared
ARCHITECTURE Xe-LPG
nm
PROCESS 10 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti AD104

CORE STATE AD104
VRAM 8 GB
CLOCK SPEED 2535 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

Analysis: Intel Arc Graphics 48EU Mobile vs NVIDIA GeForce RTX 4060 Ti AD104

Head-to-Head Benchmarks

The comparison between the Intel Arc Graphics 48EU Mobile and the NVIDIA GeForce RTX 4060 Ti AD104 is defined by an extreme gulf in raw compute capability. The database records no shared benchmark entries for these two parts, so the head-to-head analysis relies on the theoretical peak throughput figures and hardware specifications captured in the measurements. The RTX 4060 Ti AD104 delivers 22.06 TFLOPS of FP32 compute, while the Intel Arc Graphics 48EU Mobile produces 1,382.4 GFLOPS, which translates to 1.38 TFLOPS. That places the NVIDIA part at roughly 16 times the FP32 throughput of the Intel integrated solution. The difference in pixel throughput is similarly stark: the RTX 4060 Ti AD104 reaches 121.7 GPixel/s, whereas the Intel part manages 14.40 GPixel/s, an 8.5x gap. Texture rate tells the same story, with the NVIDIA GPU at 344.8 GTexel/s versus 43.20 GTexel/s for the Intel iGPU, an 8x margin.

Clock speeds do not bridge the gap. The RTX 4060 Ti AD104 operates with a base clock of 2310 MHz and a boost clock of 2535 MHz. The Intel Arc Graphics 48EU Mobile has a base clock of 300 MHz and a boost of 1800 MHz. Even at maximum boost, the Intel part runs 735 MHz lower than the NVIDIA base clock. The NVIDIA GPU also carries 34 ray tracing cores and 136 tensor cores, while the Intel Arc Graphics 48EU Mobile lists no dedicated RT or tensor core count in the database. In FP16 compute, the RTX 4060 Ti AD104 runs at 22.06 TFLOPS with a 1:1 ratio, while the Intel part achieves 2.765 TFLOPS with a 2:1 ratio, meaning the NVIDIA card has roughly 8 times the half-precision throughput.

Memory configuration amplifies the performance disparity. The RTX 4060 Ti AD104 uses 8 GB of GDDR6 on a 128-bit bus, delivering 288.0 GB/s of bandwidth. The Intel Arc Graphics 48EU Mobile uses system shared memory with a system dependent bandwidth figure, so no fixed bandwidth number is recorded. The NVIDIA card's dedicated memory pool avoids the contention and latency penalties inherent to shared memory architectures. The Intel part's memory clock is listed as system shared, with no dedicated memory speed, while the RTX 4060 Ti AD104 runs its memory at 2250 MHz with 18 Gbps effective transfer.

The RTX 4060 Ti AD104 also holds advantages in shading units, texture mapping units, and render output units. It has 4,352 shading units, 136 TMUs, and 48 ROPs. The Intel Arc Graphics 48EU Mobile has 384 shading units, 24 TMUs, and 8 ROPs. That is an 11.3x difference in shading units, a 5.7x difference in TMUs, and a 6x difference in ROPs. These structural differences explain why the peak rate gaps are so large across every fill-rate and compute metric.

Where Each One Wins

The RTX 4060 Ti AD104 wins on every compute-intensive workload category recorded in the database. Its FP32 peak of 22.06 TFLOPS makes it suited for demanding 3D rendering, high-resolution gaming, and GPU-accelerated compute tasks. The 34 ray tracing cores provide dedicated hardware for real-time ray-traced effects, a feature the Intel Arc Graphics 48EU Mobile does not list. The 136 tensor cores enable AI acceleration and DLSS-style features, though the database does not specify which AI frameworks or libraries are supported. The 288.0 GB/s memory bandwidth supports large texture loads and high-resolution frame buffers without the bottleneck of system shared memory. The 8 GB GDDR6 capacity allows larger working sets than what a shared memory iGPU can reliably allocate.

The Intel Arc Graphics 48EU Mobile wins in power efficiency and physical integration. Its TDP is 28 W, compared to 160 W for the RTX 4060 Ti AD104. That is a 132 W difference, making the Intel part suitable for thin-and-light portable devices where thermal and power budgets are constrained. The Intel GPU is an IGP with a ring bus interface, meaning it requires no separate card slot, no power connectors, and no dedicated PSU recommendation. The RTX 4060 Ti AD104 is a dual-slot card requiring a 1x 16-pin power connector and a suggested 450 W PSU. The Intel part's display outputs are portable device dependent, reflecting its integration into mobile systems, while the NVIDIA card offers 1x HDMI 2.1 and 3x DisplayPort 1.4a outputs for multi-monitor desktop setups.

The RTX 4060 Ti AD104 also wins on API feature level. It supports DirectX 12 Ultimate (12_2), while the Intel part supports DirectX 12 (12_1). Both support OpenGL 4.6 and Vulkan 1.4, so the API gap is limited to the DirectX feature tier. The NVIDIA card's production status is end-of-life, while the Intel part remains active in production. That status difference does not affect measured performance but does indicate availability trajectories.

Architecture Differences

The two GPUs come from fundamentally different design philosophies. The Intel Arc Graphics 48EU Mobile uses the Xe-LPG architecture built on Intel's Meteor Lake chip, fabricated on a 10 nm process at Intel's own foundry. The NVIDIA GeForce RTX 4060 Ti AD104 uses the Ada Lovelace architecture on the AD104 chip, fabricated on a 5 nm process at TSMC. The process node difference is significant: 10 nm versus 5 nm, which affects transistor density and power efficiency characteristics. The database records the RTX 4060 Ti AD104 as having 35,800 million transistors on a 294 mm² die, with a transistor density of 121.8M per mm². The Intel part has no transistor count, die size, or density figures recorded, so no direct comparison is possible on those metrics.

The memory subsystem represents a core architectural divergence. The Intel Arc Graphics 48EU Mobile uses system shared memory with a system dependent bandwidth, meaning it borrows from the host system's RAM pool. The RTX 4060 Ti AD104 has dedicated 8 GB GDDR6 memory with a 128-bit bus and fixed 288.0 GB/s bandwidth. This dedicated memory architecture allows the NVIDIA card to maintain consistent memory performance regardless of system RAM configuration, while the Intel part's memory performance varies with the host platform.

The compute resource allocation differs greatly. The Intel part packs 384 shading units, 24 TMUs, and 8 ROPs into a 28 W envelope. The NVIDIA part uses 4,352 shading units, 136 TMUs, and 48 ROPs within a 160 W TDP. The RTX 4060 Ti AD104 also includes 34 RT cores and 136 tensor cores, which are absent from the Intel part's recorded specifications. The FP16 execution mode differs as well: the Intel part uses a 2:1 ratio, halving its FP16 throughput relative to FP32, while the NVIDIA part runs FP16 at a 1:1 ratio, matching its FP32 rate.

The bus interface and physical form factor further separate the two. The Intel Arc Graphics 48EU Mobile uses a ring bus and is an IGP, integrated directly into the Meteor Lake chip. The RTX 4060 Ti AD104 uses PCIe 4.0 x8 and is a dual-slot discrete card measuring 240 mm in length, 111 mm in height, and 40 mm in width. The NVIDIA card requires a 1x 16-pin power connector and a suggested 450 W PSU, while the Intel part has no power connector and no PSU suggestion. The generation labels also differ: Intel lists the part under Arc Graphics-M (Meteor Lake), while NVIDIA places it in the GeForce 40 generation.

FAQ

Q: Which GPU has higher FP32 compute performance?

A: The RTX 4060 Ti AD104 delivers 22.06 TFLOPS of FP32, while the Intel Arc Graphics 48EU Mobile produces 1,382.4 GFLOPS (1.38 TFLOPS). The NVIDIA part has roughly 16 times the FP32 throughput.

Q: How much memory bandwidth does each GPU provide?

A: The RTX 4060 Ti AD104 has 288.0 GB/s of bandwidth from 8 GB of GDDR6 on a 128-bit bus. The Intel Arc Graphics 48EU Mobile uses system shared memory with system dependent bandwidth, so no fixed bandwidth figure is recorded.

Q: Do both GPUs support ray tracing?

A: The RTX 4060 Ti AD104 includes 34 dedicated ray tracing cores. The Intel Arc Graphics 48EU Mobile does not list any RT core count in the database, so no ray tracing hardware is recorded for it.

Q: What are the power requirements for each GPU?

A: The Intel Arc Graphics 48EU Mobile has a TDP of 28 W and no power connectors. The RTX 4060 Ti AD104 has a TDP of 160 W, requires a 1x 16-pin power connector, and carries a suggested PSU rating of 450 W.

Q: Which DirectX feature level does each GPU support?

A: The RTX 4060 Ti AD104 supports DirectX 12 Ultimate (12_2). The Intel Arc Graphics 48EU Mobile supports DirectX 12 (12_1). Both support OpenGL 4.6 and Vulkan 1.4.

Q: What is the production status of each GPU?

A: The Intel Arc Graphics 48EU Mobile is listed as active in production. The RTX 4060 Ti AD104 is listed as end-of-life.

Specification Differences

The two GPUs differ across nearly every recorded specification field. The process node differs: Intel uses 10 nm at its own foundry, while NVIDIA uses 5 nm at TSMC. The RTX 4060 Ti AD104 has 35,800 million transistors on a 294 mm² die with a density of 121.8M per mm²; the Intel part has no such figures recorded. Base clocks are 300 MHz for Intel and 2310 MHz for NVIDIA. Boost clocks are 1800 MHz for Intel and 2535 MHz for NVIDIA. Memory size is system shared for Intel versus 8 GB for NVIDIA. Memory type is system shared versus GDDR6. Bus width is system shared versus 128 bit. Bandwidth is system dependent versus 288.0 GB/s. Shading units are 384 versus 4,352. TMUs are 24 versus 136. ROPs are 8 versus 48. RT cores are not listed for Intel versus 34 for NVIDIA. Tensor cores are not listed for Intel versus 136 for NVIDIA. Pixel rate is 14.40 GPixel/s versus 121.7 GPixel/s. Texture rate is 43.20 GTexel/s versus 344.8 GTexel/s. FP32 is 1,382.4 GFLOPS versus 22.06 TFLOPS. FP16 is 2.765 TFLOPS (2:1) versus 22.06 TFLOPS (1:1). TDP is 28 W versus 160 W. Slot width is IGP versus dual-slot. Power connectors are none versus 1x 16-pin. Suggested PSU is not listed versus 450 W. Bus interface is ring bus versus PCIe 4.0 x8. Display outputs are portable device dependent versus 1x HDMI 2.1 and 3x DisplayPort 1.4a. DirectX support is 12 (12_1) versus 12 Ultimate (12_2). Production status is active versus end-of-life. Release dates are December 13, 2023 for Intel and March 31, 2024 for NVIDIA. The Intel part has no launch MSRP recorded; the RTX 4060 Ti AD104 has a launch MSRP of 399 USD. The RTX 4060 Ti AD104 measures 240 mm by 111 mm by 40 mm.

DETAILED SPECIFICATIONS

SPECIFICATION
Graphics 48EU Mobile
RTX 4060 Ti AD104
Core Specs
Shading Units
384
4,352 +1033.3%
Shaders
384
4,352 +1033.3%
TMUs
24
136 +466.7%
ROPs
8
48 +500.0%
SM Count
—
34
Execution Units
48
—
Clocks
Base Clock
300 MHz
2310 MHz
Boost Clock
1800 MHz
2535 MHz
Memory Clock
System Shared
2250 MHz 18 Gbps effective
Memory
Memory Size
System Shared
8 GB
VRAM (MB)
—
8,192
Memory Type
System Shared
GDDR6
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
288.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
—
32 MB
Performance
Pixel Rate
14.40 GPixel/s
121.7 GPixel/s
Texture Rate
43.20 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
1,382.4 GFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
—
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
2.765 TFLOPS (2:1)
22.06 TFLOPS (1:1)
AI/RT
RT Cores
—
34
Tensor Cores
—
136
Power
TDP
28 W
160 W
TDP (W)
28
160 +471.4%
Suggested PSU
—
450 W
Power Connectors
—
1x 16-pin
Architecture
Architecture
Xe-LPG
Ada Lovelace
GPU Name
Meteor Lake
AD104
Generation
Arc Graphics-M (Meteor Lake)
GeForce 40
Process Size
10 nm
5 nm
Transistors
—
35,800 million
Die Size
—
294 mm²
Foundry
Intel
TSMC
Density
—
121.8M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
—
8.9
Shader Model
6.6
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
Ring Bus
PCIe 4.0 x8
Other
Launch Price
—
399 USD
Production
Active
End-of-life
Predecessor
HD Graphics-M
GeForce 30
Successor
—
GeForce 50
View Arc Graphics 48EU Mobile Details View GeForce RTX 4060 Ti AD104 Details