Intel Arc G3 vs NVIDIA GeForce RTX 5060 Mobile Comparison

Head-to-Head Benchmarks

The database contains no direct head-to-head benchmark results between the Intel Arc G3 and the NVIDIA GeForce RTX 5060 Mobile. The Intel Arc G3 has no recorded benchmark scores, while the RTX 5060 Mobile has a full suite of measurements. This makes a direct score-by-score comparison impossible. The RTX 5060 Mobile's recorded data shows a 3DMark Steel Nomad DX12 score of 3013.5, a Geekbench OpenCL score of 96969, and a Geekbench Vulkan score of 96451. Its Passmark results range from 87 in DirectX 12 to 203 in DirectX 9, with a G3D score of 18852 and a GPU compute score of 7607.

The RTX 5060 Mobile's average benchmark score across all recorded tests is 22435. That places it in the 67th percentile of all GPUs in the database. Its nearest rivals in the database include the AMD Radeon RX 7700 XT with an average score of 22549, which is 0.5% higher, and the NVIDIA GeForce RTX 4060 Mobile with an average score of 22729, which is 1.3% higher. The RTX 5060 Mobile sits slightly ahead of the AMD Radeon RX 5700, which scores 22170 (1.2% lower), and the AMD Radeon RX 6700S, which scores 22154 (1.3% lower). These deltas indicate that the RTX 5060 Mobile lands in a tight performance cluster, within roughly a point or two of its nearest competitors.

The Intel Arc G3, by contrast, has a percentile rank of 50 and an average benchmark score of 0. It has no nearest rivals listed. This means the database holds no measured performance data for the Arc G3, so any comparison must rely on architectural and specification differences rather than benchmark outcomes.

Where Each One Wins

The NVIDIA GeForce RTX 5060 Mobile is the only one of the two with recorded benchmark wins. It shows a strong compute showing in Geekbench OpenCL with 96969 points and Vulkan with 96451 points. In Passmark G3D, it achieves 18852, and in GPU compute it reaches 7607. The 3DMark Steel Nomad DX12 score of 3013.5 indicates modern API performance. The RTX 5060 Mobile also records a Passmark G2D score of 876, which reflects 2D graphics throughput.

For legacy DirectX workloads, the Passmark results show 203 in DirectX 9, 168 in DirectX 11, and 119 in DirectX 10, with the lowest score of 87 in DirectX 12. These numbers suggest that the RTX 5060 Mobile handles older APIs with relative ease, while its DirectX 12 result is the weakest of the four Passmark DirectX tests. The database does not provide comparable scores for the Intel Arc G3, so no use-case advantage can be attributed to it from measured data.

The Intel Arc G3's theoretical specifications, however, indicate it could occupy a distinct niche. With a 25 W TDP and integrated graphics (IGP) slot width, it targets low-power, portable devices. The RTX 5060 Mobile carries a 45 W TDP, also with IGP slot width, but it is a discrete-class part using a PCIe 5.0 x16 bus interface. The Arc G3 uses system-shared memory, while the RTX 5060 Mobile has dedicated 8 GB GDDR7. For workloads that rely on dedicated video memory bandwidth, the RTX 5060 Mobile has a clear structural advantage. For ultra-low-power integrated scenarios, the Arc G3's 25 W TDP is the differentiating factor.

Architecture Differences

The Intel Arc G3 is built on the Xe3-LPG architecture, part of the Arc Graphics-M (Panther Lake) generation. It uses a 3 nm process node fabricated by Intel. The chip is named Panther Lake. The RTX 5060 Mobile uses the Blackwell 2.0 architecture, part of the GeForce 50 Mobile generation, on a 5 nm process node fabricated by TSMC. The chip is GB206.

The Arc G3 has 1280 shading units, 40 texture mapping units, 20 raster output units, and 10 ray tracing cores. It has no dedicated tensor cores listed. The RTX 5060 Mobile has 3328 shading units, 104 TMUs, 48 ROPs, 26 ray tracing cores, and 104 tensor cores. The RTX 5060 Mobile's transistor count is 21,900 million on a die size of 181 mm², giving a transistor density of 121.0M per mm². The Arc G3's transistor count and die size are listed as unknown.

Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The RTX 5060 Mobile's FP32 throughput is 9.684 TFLOPS, and its FP16 throughput is also 9.684 TFLOPS with a 1:1 ratio. The Arc G3's FP32 is 6.144 TFLOPS, with FP16 at 12.29 TFLOPS using a 2:1 ratio. This means the Arc G3 has a higher FP16-to-FP32 ratio, while the RTX 5060 Mobile treats both at the same rate.

The RTX 5060 Mobile's memory clock is listed as 1500 MHz with 24 Gbps effective. Its memory bus is 128 bit, and bandwidth is 384.0 GB/s. The Arc G3's memory clock is marked as "System Shared," with no dedicated bus width or bandwidth figures; its memory bandwidth is "System Dependent." The RTX 5060 Mobile has a base clock of 952 MHz and a boost clock of 1455 MHz. The Arc G3 has a base clock of 300 MHz and a boost clock of 2400 MHz.

Specification Differences

The two GPUs differ across nearly every measurable specification. The Intel Arc G3 uses a 3 nm node from Intel, while the NVIDIA RTX 5060 Mobile uses a 5 nm node from TSMC. The Arc G3's chip is Panther Lake, and the RTX 5060 Mobile's chip is GB206. The RTX 5060 Mobile has a transistor count of 21,900 million and a die size of 181 mm²; the Arc G3's are unknown.

Clock speeds differ significantly. The Arc G3 has a base clock of 300 MHz and a boost of 2400 MHz. The RTX 5060 Mobile has a base of 952 MHz and a boost of 1455 MHz. The RTX 5060 Mobile's memory clock is 1500 MHz with 24 Gbps effective, while the Arc G3's memory clock is system-shared. Memory size and type also differ: the Arc G3 uses system-shared memory, while the RTX 5060 Mobile has 8 GB of GDDR7 on a 128-bit bus with 384.0 GB/s bandwidth.

Compute resources differ sharply. The Arc G3 has 1280 shading units, 40 TMUs, 20 ROPs, and 10 RT cores. The RTX 5060 Mobile has 3328 shading units, 104 TMUs, 48 ROPs, 26 RT cores, and 104 tensor cores. Pixel rate is 48.00 GPixel/s for the Arc G3 versus 69.84 GPixel/s for the RTX 5060 Mobile. Texture rate is 96.00 GTexel/s for the Arc G3 versus 151.3 GTexel/s for the RTX 5060 Mobile.

FP32 throughput is 6.144 TFLOPS for the Arc G3 and 9.684 TFLOPS for the RTX 5060 Mobile. FP16 throughput is 12.29 TFLOPS (2:1) for the Arc G3 and 9.684 TFLOPS (1:1) for the RTX 5060 Mobile. TDP is 25 W for the Arc G3 and 45 W for the RTX 5060 Mobile. The bus interface is IGP for the Arc G3 and PCIe 5.0 x16 for the RTX 5060 Mobile. Both use IGP slot width and have no power connectors. The RTX 5060 Mobile's predecessor is GeForce 40 Mobile; the Arc G3 has no listed predecessor.

FAQ

Q: Which GPU has more shading units?

A: The NVIDIA GeForce RTX 5060 Mobile has 3328 shading units, while the Intel Arc G3 has 1280.

Q: What is the memory configuration difference?

A: The Intel Arc G3 uses system-shared memory with system-dependent bandwidth. The NVIDIA GeForce RTX 5060 Mobile has 8 GB of GDDR7 on a 128-bit bus with 384.0 GB/s bandwidth.

Q: How do the process nodes compare?

A: The Intel Arc G3 is fabricated on a 3 nm node by Intel, while the NVIDIA GeForce RTX 5060 Mobile uses a 5 nm node by TSMC.

Q: What is the TDP difference?

A: The Intel Arc G3 has a TDP of 25 W, and the NVIDIA GeForce RTX 5060 Mobile has a TDP of 45 W.

Q: Does the RTX 5060 Mobile have tensor cores?

A: Yes, the NVIDIA GeForce RTX 5060 Mobile has 104 tensor cores. The Intel Arc G3 has no tensor cores listed.

Q: What does the RTX 5060 Mobile's average benchmark score indicate?

A: The RTX 5060 Mobile has an average benchmark score of 22435, placing it in the 67th percentile of all GPUs. It is 0.5% behind the AMD Radeon RX 7700 XT and 1.3% behind the NVIDIA GeForce RTX 4060 Mobile, while leading the AMD Radeon RX 5700 by 1.2% and the AMD Radeon RX 6700S by 1.3%.