Intel Arc G3 Extreme vs NVIDIA GeForce RTX 5090 D V2 Comparison

Head-to-Head Benchmarks

The recorded data contains a single benchmark entry for the NVIDIA GeForce RTX 5090 D V2: a 3DMark Steel Nomad DX12 score of 16,504. The Intel Arc G3 Extreme has no benchmark scores recorded in the database, and the head-to-head benchmark list between the two is empty. Consequently, direct numerical comparison is limited to the NVIDIA card's absolute performance and its standing relative to other GPUs.

The RTX 5090 D V2's score of 16,504 places it in the 59th percentile among all GPUs in the database. Its nearest rivals, as listed in the database, are extremely close in score. The NVIDIA T400 scores 16,508, a delta of 0% from the RTX 5090 D V2. The AMD Radeon PRO W7500 scores 16,415, which is 0.5% behind. The NVIDIA RTX PRO 6000 Blackwell scores 16,408, a 0.6% deficit. The AMD Radeon RX 5700 XT scores 16,361, trailing by 0.9%. These deltas are narrow, indicating that the RTX 5090 D V2 sits within a tightly clustered performance band in this particular test, essentially trading places with the T400 at the top of the group.

The Intel Arc G3 Extreme offers no comparable benchmark result in the database, so a head-to-head score comparison cannot be performed. The data shows zero wins for either card in direct competition. The only measurable performance data available belongs to the NVIDIA card, and its score indicates a mid-tier placement (59th percentile) despite its high-end specifications.

Where Each One Wins

Without benchmark scores for the Intel Arc G3 Extreme, the use-case split relies on architectural and specification data rather than measured performance.

The Intel Arc G3 Extreme is an integrated graphics processor (IGP) with a 3 nm process node, a 300 MHz base clock, and a 2500 MHz boost clock. It has 1,536 shading units, 48 texture mapping units, and 24 raster operation pipelines. Its memory is system shared, with bandwidth described as system dependent. Its power envelope is 80 W TDP, and it uses no power connectors. This configuration suits lightweight or portable computing scenarios where power draw is minimal and the GPU shares system memory. Its FP32 throughput is 7.680 TFLOPS, and its FP16 output is 15.36 TFLOPS (2:1). It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The display outputs are portable device dependent, reinforcing its role in mobile or compact systems.

The NVIDIA GeForce RTX 5090 D V2 is a discrete, dual-slot card with a 575 W TDP, a 1x 16-pin power connector, and a suggested power supply of 950 W. It uses a 5 nm TSMC process, has 92,200 million transistors on a 750 mm² die, and a transistor density of 122.9M per mm². Its memory subsystem is 24 GB of GDDR7 on a 384-bit bus, delivering 1.34 TB/s of bandwidth. The card has 21,760 shading units, 680 TMUs, 176 ROPs, 170 RT cores, and 680 tensor cores. Its FP32 performance is 104.8 TFLOPS, and its FP16 performance is also 104.8 TFLOPS (1:1). Base clock is 2017 MHz with a boost of 2407 MHz. It outputs to 1x HDMI 2.1b and 3x DisplayPort 2.1b, and connects via PCIe 5.0 x16. Its physical dimensions are 304 mm in length, 137 mm in height, and 48 mm in width.

The wins are contextual. The Arc G3 Extreme wins in scenarios constrained by power and physical space, given its 80 W TDP and IGP form factor. The RTX 5090 D V2 wins in raw compute, memory bandwidth, and feature set, as indicated by its 104.8 TFLOPS FP32 figure versus 7.680 TFLOPS for the Intel part, and its 1.34 TB/s bandwidth versus system-dependent shared memory. The NVIDIA card also carries dedicated RT and tensor cores (170 and 680, respectively), while the Intel chip has 12 RT cores and no listed tensor core count.

Architecture Differences

The two GPUs come from different manufacturers, use different process nodes, and target entirely different market segments.

The Intel Arc G3 Extreme is built on the Panther Lake chip using the Xe3-LPG architecture, part of the Arc Graphics-M (Panther Lake) generation. It is fabricated on a 3 nm process at Intel's foundry. Transistor count and die size are unknown for this part. The base clock is 300 MHz, and the boost clock is 2500 MHz. Memory is system shared in size, type, and bus width, with bandwidth labeled system dependent. The chip has 1,536 shading units, 48 TMUs, 24 ROPs, and 12 RT cores. No tensor core count is listed. Pixel rate is 60.00 GPixel/s, texture rate is 120.0 GTexel/s, FP32 is 7.680 TFLOPS, and FP16 is 15.36 TFLOPS with a 2:1 ratio. The TDP is 80 W. The slot width is IGP, and the bus interface is also IGP. Display outputs are portable device dependent. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

The NVIDIA GeForce RTX 5090 D V2 is based on the GB202 chip with Blackwell 2.0 architecture, part of the GeForce 50 series. It is fabricated on a 5 nm process at TSMC. The die contains 92,200 million transistors across 750 mm², yielding a transistor density of 122.9M per mm². Base clock is 2017 MHz, boost is 2407 MHz, and memory runs at 1750 MHz with 28 Gbps effective. The memory configuration is 24 GB of GDDR7 on a 384-bit bus, with 1.34 TB/s bandwidth. The GPU packs 21,760 shading units, 680 TMUs, 176 ROPs, 170 RT cores, and 680 tensor cores. Pixel rate is 423.6 GPixel/s, texture rate is 1,636.8 GTexel/s, FP32 is 104.8 TFLOPS, and FP16 is 104.8 TFLOPS at a 1:1 ratio. TDP is 575 W. It is a dual-slot card with a 1x 16-pin power connector and a 950 W suggested PSU. The bus interface is PCIe 5.0 x16. Display outputs are 1x HDMI 2.1b and 3x DisplayPort 2.1b. The card measures 304 mm by 137 mm by 48 mm.

The architectural split is stark. Intel uses a smaller 3 nm node versus NVIDIA's 5 nm node. Intel integrates the GPU into the system (IGP), while NVIDIA offers a discrete add-in card. Intel shares system memory; NVIDIA uses dedicated GDDR7. Intel lists no tensor cores; NVIDIA has 680. Intel's FP16 throughput is double its FP32 (2:1), while NVIDIA's FP16 matches FP32 exactly (1:1). Both support the same API set: DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The release dates differ: the RTX 5090 D V2 was released on 2025-08-14, while the Arc G3 Extreme is dated 2026-05-31. The NVIDIA card's predecessor is GeForce 40 and its successor is GeForce 60. The Intel part has no listed predecessor or successor.

FAQ

Q: What is the single benchmark score recorded for the NVIDIA GeForce RTX 5090 D V2?

A: The database records a 3DMark Steel Nomad DX12 score of 16,504 for the RTX 5090 D V2. Its average benchmark score is also 16,504.

Q: How does the RTX 5090 D V2 compare to its nearest rivals in the database?

A: The NVIDIA T400 scores 16,508, which is a 0% delta from the RTX 5090 D V2. The AMD Radeon PRO W7500 scores 16,415, a 0.5% delta. The NVIDIA RTX PRO 6000 Blackwell scores 16,408, a 0.6% delta. The AMD Radeon RX 5700 XT scores 16,361, a 0.9% delta.

Q: Does the Intel Arc G3 Extreme have any benchmark scores in the database?

A: No. The Intel Arc G3 Extreme has an empty benchmarks list, an average benchmark score of 0, and no nearest rivals recorded.

Q: What are the FP32 and FP16 compute figures for each GPU?

A: The Intel Arc G3 Extreme delivers 7.680 TFLOPS FP32 and 15.36 TFLOPS FP16 (2:1). The NVIDIA GeForce RTX 5090 D V2 delivers 104.8 TFLOPS FP32 and 104.8 TFLOPS FP16 (1:1).

Q: What memory configurations do the two GPUs use?

A: The Intel Arc G3 Extreme uses system shared memory with system dependent bandwidth. The NVIDIA GeForce RTX 5090 D V2 uses 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth.

Q: What are the TDP and power connector requirements for each card?

A: The Intel Arc G3 Extreme has an 80 W TDP and uses no power connectors. The NVIDIA GeForce RTX 5090 D V2 has a 575 W TDP, uses a 1x 16-pin power connector, and has a suggested power supply of 950 W.

The Verdict

The data indicates that the NVIDIA GeForce RTX 5090 D V2 is the only one of the two with measurable benchmark performance in the database. Its 3DMark Steel Nomad DX12 score of 16,504 places it in the 59th percentile, with nearest rivals within 0.9%. The Intel Arc G3 Extreme has no recorded benchmark results, so its performance relative to the NVIDIA card cannot be established from the database.

For compute-heavy workloads, the RTX 5090 D V2 is the clear choice based on specifications. Its 104.8 TFLOPS FP32 output is over 13 times the Intel part's 7.680 TFLOPS. Its 1.34 TB/s dedicated memory bandwidth versus system dependent shared memory gives it a substantial advantage in memory-intensive tasks. The 680 tensor cores and 170 RT cores provide dedicated acceleration for AI and ray tracing workloads, features the Intel chip lacks entirely in tensor core count and only partially addresses with 12 RT cores.

For power-constrained or space-constrained systems, the Intel Arc G3 Extreme is the only viable option. Its 80 W TDP, IGP form factor, no power connectors, and portable device dependent display outputs fit integrated, low-power devices. The NVIDIA card requires 575 W, a 950 W suggested PSU, and a dual-slot footprint measuring 304 mm by 137 mm by 48 mm.

The release timeline also matters. The RTX 5090 D V2 launched on 2025-08-14 with a launch MSRP of 2,299 USD. The Arc G3 Extreme is dated 2026-05-31. The NVIDIA card has a predecessor (GeForce 40) and successor (GeForce 60) listed, while the Intel part has neither.

Given the absence of benchmark data for the Intel GPU, the verdict from the database is straightforward: the RTX 5090 D V2 is the performance leader in every measured or specified category except power consumption and physical footprint. The Arc G3 Extreme serves the integrated, low-power segment where the NVIDIA card cannot operate. Users requiring maximum compute and memory bandwidth should select the RTX 5090 D V2. Users building compact, low-power systems with shared memory should use the Arc G3 Extreme. The database does not support any other conclusion.