AMD Radeon RX 9050 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison
AMD Radeon RX 9050
GeForce RTX 4070 Ti SUPER AD102
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9050 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102
Where Each One Wins
The recorded data presents a clear split between these two cards, though one side holds almost all of the measurable advantages. The AMD Radeon RX 9050 wins on efficiency metrics and physical footprint, while the NVIDIA GeForce RTX 4070 Ti SUPER AD102 dominates every raw performance category in the database.
The RX 9050 draws 92 W under load, which places it in a fundamentally different power class than the 285 W RTX 4070 Ti SUPER AD102. That 193 W gap translates directly to system requirements: AMD suggests a 250 W power supply, while NVIDIA recommends 600 W. The AMD card also fits a dual-slot layout with a single 8-pin connector, versus the NVIDIA card's triple-slot cooler and 16-pin connector. For compact builds or systems with modest power delivery, the RX 9050 is the only viable choice between the two.
The RTX 4070 Ti SUPER AD102 wins every compute and graphics benchmark category that has recorded data. Its FP32 throughput of 44.10 TFLOPS is roughly four times the RX 9050's 10.65 TFLOPS. Memory bandwidth tells a similar story: 672.3 GB/s against 288.0 GB/s. Texture rate favors NVIDIA at 689.0 GTexel/s versus 166.4 GTexel/s, and pixel rate comes in at 250.6 GPixel/s versus 166.4 GPixel/s. The database shows zero wins for the AMD card in head-to-head benchmarks, with all measurable performance advantages going to the NVIDIA side.
The single benchmark entry in the database, 3dmark_3dmark_steel_nomad_dx12, gives the RTX 4070 Ti SUPER AD102 a score of 6269.5, with an average benchmark score of 6270. The RX 9050 has no recorded benchmark scores and no nearest rivals listed, so its relative standing in that test cannot be quantified from the available data.
Architecture Differences
The two cards come from different architectural generations and use different process nodes. AMD's RX 9050 uses the Navi 44 chip built on RDNA 4.0 architecture, fabricated on TSMC's 4 nm process. NVIDIA's RTX 4070 Ti SUPER AD102 uses the AD102 chip with Ada Lovelace architecture, also on TSMC silicon but at the larger 5 nm node.
Transistor counts differ substantially. The AD102 die packs 76,300 million transistors across a 609 mm² die. The Navi 44 chip contains 29,700 million transistors on a 199 mm² die. Despite the smaller absolute count, the AMD chip achieves a higher transistor density of 149.2M per mm², compared to 125.3M per mm² for the NVIDIA chip. This density advantage reflects the tighter 4 nm process.
The NVIDIA card is far larger in every physical dimension. Its board measures 310 mm in length, 140 mm in height, and 61 mm in width. The RX 9050 has no recorded dimensions in the database, but its dual-slot design contrasts with the NVIDIA card's triple-slot footprint.
Memory architecture diverges completely. The RX 9050 uses 8 GB of GDDR6 on a 128-bit bus, while the RTX 4070 Ti SUPER AD102 uses 16 GB of GDDR6X on a 256-bit bus. Effective memory speeds are 18 Gbps for AMD and 21 Gbps for NVIDIA. The resulting bandwidth gap is substantial: 288.0 GB/s versus 672.3 GB/s.
Compute resources differ by an order of magnitude. The RX 9050 has 1024 shading units, 64 texture mapping units, 64 ROPs, and 16 ray tracing cores. The RTX 4070 Ti SUPER AD102 has 8448 shading units, 264 TMUs, 96 ROPs, 66 RT cores, and 264 tensor cores. The NVIDIA card's tensor cores have no direct counterpart in the AMD specification, which lists no tensor core count.
Clock behavior also differs. The RX 9050 lists a base clock of 1330 MHz, a game clock of 1920 MHz, and a boost clock of 2600 MHz. The NVIDIA card starts higher at 2340 MHz base and boosts to 2610 MHz. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
The bus interface favors AMD with PCIe 5.0 x16, while NVIDIA uses PCIe 4.0 x16. Display outputs differ as well: AMD provides 1x HDMI 2.1b and 2x DisplayPort 2.1a, while NVIDIA provides 1x HDMI 2.1 and 3x DisplayPort 1.4a.
Head-to-Head Benchmarks
The database contains no direct head-to-head benchmark entries comparing these two specific cards. However, the RTX 4070 Ti SUPER AD102 has one recorded benchmark result: a 3dmark_3dmark_steel_nomad_dx12 score of 6269.5, with an average benchmark score of 6270. The RX 9050 has no benchmark entries, so a direct numerical comparison in any test is impossible from the recorded data.
What the database does show is where the NVIDIA card sits relative to other GPUs. Its average score of 6270 places it at the 36th percentile among all GPUs. Its nearest rivals are tightly clustered: the NVIDIA GeForce RTX 5070 Ti SUPER is essentially identical at 6270 (0% delta), the NVIDIA Quadro K620 scores 6282 (-0.2% delta), the AMD FirePro W600 scores 6223 (0.8% delta), and the AMD Radeon R7 M350 scores 6327 (-0.9% delta). This grouping suggests the RTX 4070 Ti SUPER AD102's performance level is well-established, sitting within 1% of several other cards.
The RX 9050 carries a 50th percentile ranking among all GPUs, but with an average benchmark score of zero and no nearest rivals listed. That percentile value cannot be validated against any actual benchmark result in the database. The meaningful comparison remains the architectural and specification gap described above, which consistently favors the NVIDIA card by wide margins in compute throughput, memory bandwidth, and texture processing.
FAQ
Q: Which card has more memory bandwidth?
A: The NVIDIA GeForce RTX 4070 Ti SUPER AD102 has 672.3 GB/s of bandwidth from its 16 GB GDDR6X memory on a 256-bit bus, while the AMD Radeon RX 9050 has 288.0 GB/s from 8 GB GDDR6 on a 128-bit bus.
Q: How do the power requirements compare?
A: The RX 9050 has a TDP of 92 W and suggests a 250 W power supply, while the RTX 4070 Ti SUPER AD102 has a TDP of 285 W and suggests a 600 W power supply. The AMD card uses a single 8-pin connector, and the NVIDIA card uses one 16-pin connector.
Q: What is the transistor density difference?
A: The AMD Navi 44 chip achieves 149.2M transistors per mm² on its 4 nm process, while the NVIDIA AD102 chip achieves 125.3M per mm² on its 5 nm process. The AMD chip is smaller at 199 mm² versus 609 mm², though it contains fewer total transistors at 29,700 million versus 76,300 million.
Q: Does the RTX 4070 Ti SUPER AD102 have a recorded benchmark score?
A: Yes, it scores 6269.5 in 3dmark_3dmark_steel_nomad_dx12, with an average benchmark score of 6270. The RX 9050 has no recorded benchmark scores in the database.
Q: What are the display output differences?
A: The AMD card provides 1x HDMI 2.1b and 2x DisplayPort 2.1a. The NVIDIA card provides 1x HDMI 2.1 and 3x DisplayPort 1.4a.
Q: Which card uses which PCIe generation?
A: The AMD Radeon RX 9050 uses PCIe 5.0 x16, while the NVIDIA GeForce RTX 4070 Ti SUPER AD102 uses PCIe 4.0 x16.
The Verdict
The data supports only one conclusion for raw performance: the NVIDIA GeForce RTX 4070 Ti SUPER AD102 is in a different performance class. Its FP32 throughput of 44.10 TFLOPS, texture rate of 689.0 GTexel/s, and memory bandwidth of 672.3 GB/s are all multiples of the RX 9050's corresponding figures. The NVIDIA card also carries double the memory capacity at 16 GB versus 8 GB, with faster GDDR6X memory on a wider bus. Its recorded benchmark score of 6269.5 in 3dmark_3dmark_steel_nomad_dx12 gives it a concrete performance data point that the RX 9050 simply lacks.
The AMD Radeon RX 9050 claims its wins on efficiency and integration. Its 92 W TDP, dual-slot cooler, single 8-pin power connector, and 250 W suggested power supply make it suitable for systems where the NVIDIA card's 285 W TDP, triple-slot cooler, 16-pin connector, and 600 W suggested power supply would be impractical. The AMD card also uses the newer PCIe 5.0 interface and supports DisplayPort 2.1a outputs, which the NVIDIA card does not.
The production status differentiates the two as well. The RX 9050 is listed as Active with a release date of July 2026, while the RTX 4070 Ti SUPER AD102 is End-of-life, released in June 2024 with a successor in the GeForce 50 series. Its launch MSRP was 799 USD. The NVIDIA card's nearest rivals cluster within 1% of its average score, indicating a mature, well-understood performance tier.
For users building around the RTX 4070 Ti SUPER AD102's capabilities, the data confirms a high-throughput card with large memory capacity and tensor cores for accelerated workloads. For users constrained by power delivery or physical space, the RX 9050 presents the only workable option between these two. The performance gap is not marginal; it spans roughly 4x in FP32 compute and over 2x in memory bandwidth. Choosing the AMD card means accepting those limits in exchange for a much lighter system footprint.
Specification Differences
| Specification | AMD Radeon RX 9050 | NVIDIA GeForce RTX 4070 Ti SUPER AD102 |
|---|---|---|
| Architecture | RDNA 4.0 | Ada Lovelace |
| Process node | 4 nm | 5 nm |
| Transistors | 29,700 million | 76,300 million |
| Die size | 199 mm² | 609 mm² |
| Transistor density | 149.2M / mm² | 125.3M / mm² |
| Base clock | 1330 MHz | 2340 MHz |
| Boost clock | 2600 MHz | 2610 MHz |
| Memory size | 8 GB GDDR6 | 16 GB GDDR6X |
| Memory bus | 128 bit | 256 bit |
| Memory bandwidth | 288.0 GB/s | 672.3 GB/s |
| Shading units | 1024 | 8448 |
| TMUs | 64 | 264 |
| ROPs | 64 | 96 |
| RT cores | 16 | 66 |
| Tensor cores | None listed | 264 |
| FP32 performance | 10.65 TFLOPS | 44.10 TFLOPS |
| FP16 performance | 10.65 TFLOPS (1:1) | 44.10 TFLOPS (1:1) |
| Pixel rate | 166.4 GPixel/s | 250.6 GPixel/s |
| Texture rate | 166.4 GTexel/s | 689.0 GTexel/s |
| TDP | 92 W | 285 W |
| Slot width | Dual-slot | Triple-slot |
| Power connectors | 1x 8-pin | 1x 16-pin |
| Suggested PSU | 250 W | 600 W |
| Bus interface | PCIe 5.0 x16 | PCIe 4.0 x16 |
| Display outputs | 1x HDMI 2.1b, 2x DisplayPort 2.1a | 1x HDMI 2.1, 3x DisplayPort 1.4a |
| Production status | Active | End-of-life |