AMD Radeon RX 9050 vs NVIDIA GeForce RTX 4060 Ti 16 GB Comparison

AMD
RADEON

AMD Radeon RX 9050

CORE STATE Navi 44
VRAM 8 GB
CLOCK SPEED 2600 MHz
TDP 92 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti 16 GB

CORE STATE AD106
VRAM 16 GB
CLOCK SPEED 2535 MHz
TDP 165 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2023

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
2,907

Analysis: AMD Radeon RX 9050 vs NVIDIA GeForce RTX 4060 Ti 16 GB

AMD Radeon RX 9050 vs NVIDIA GeForce RTX 4060 Ti 16 GB

Head-to-Head Benchmarks

The recorded database contains a single benchmark entry for the NVIDIA GeForce RTX 4060 Ti 16 GB, a 3DMark Steel Nomad DX12 run with a score of 2907. The AMD Radeon RX 9050 has no benchmark entries in the database, and the head-to-head benchmark field is empty. With zero recorded wins for either card, the comparative picture rests entirely on the single result for the NVIDIA card and its position relative to other GPUs in the database.

The RTX 4060 Ti 16 GB sits in the 18th percentile of all GPUs, meaning 82 percent of recorded graphics cards score higher. Its nearest rivals in the database are tightly clustered. The NVIDIA RTX PRO 4000 Blackwell SFF averages 2910, which is 0.1 percent above the 4060 Ti. The RTX 4060 Ti 8 GB averages 2913, 0.2 percent higher. The NVIDIA GeForce RTX 4010 averages 2893, which is 0.5 percent lower. The NVIDIA Quadro P600 averages 2923, 0.5 percent higher. These deltas are minuscule, within a range of roughly one percent, so the RTX 4060 Ti 16 GB delivers performance essentially identical to that of its closest database neighbors.

Because the RX 9050 has no benchmark score, no percentile, and no rival list in the database, direct numeric comparison between the two cards is impossible from recorded data. The RX 9050 shows an average benchmark score of zero and a percentile of 50, but that percentile is not tied to any actual measurement. The data indicates the RX 9050 has not been tested in the database benchmark suite. Any head-to-head analysis must therefore rely on architectural and specification differences rather than measured frame rates or synthetic scores.

Architecture Differences

The RX 9050 uses the Navi 44 chip built on RDNA 4.0 architecture, fabricated on a 4 nm process at TSMC. The RTX 4060 Ti 16 GB uses the AD106 chip built on Ada Lovelace architecture, fabricated on a 5 nm process also at TSMC. The RX 9050 belongs to the Navi IV (RX 9000) generation, while the RTX 4060 Ti belongs to the GeForce 40 generation. The RX 9050 is marked as Active production status, while the RTX 4060 Ti 16 GB is End-of-life.

Transistor counts differ notably. The RX 9050 packs 29,700 million transistors on a 199 mm² die, giving a transistor density of 149.2 million per square millimeter. The RTX 4060 Ti 16 GB has 22,900 million transistors on a slightly smaller 188 mm² die, with a density of 121.8 million per square millimeter. The RX 9050 carries roughly 30 percent more transistors in a die that is only about 6 percent larger, reflecting the denser 4 nm process.

The RX 9050 has 1024 shading units, 64 texture mapping units, and 64 render output units. It includes 16 ray tracing cores and no tensor cores. The RTX 4060 Ti 16 GB has 4352 shading units, 136 TMUs, and 48 ROPs. It includes 34 ray tracing cores and 136 tensor cores. The NVIDIA card has more than four times the shading units and more than double the TMUs, while the AMD card has more ROPs. The RTX 4060 Ti also brings dedicated tensor cores, which the RX 9050 lacks entirely.

Clock behavior differs. The RX 9050 has a base clock of 1330 MHz, a boost clock of 2600 MHz, and a game clock of 1920 MHz. The RTX 4060 Ti 16 GB has a base clock of 2310 MHz and a boost clock of 2535 MHz, with no game clock listed. The NVIDIA card starts at a much higher base frequency, nearly 74 percent above the AMD card, but its boost clock is slightly lower. The RX 9050 relies on a wider boost range to reach its peak frequency.

Both cards support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The RX 9050 uses a PCIe 5.0 x16 bus interface, while the RTX 4060 Ti 16 GB uses PCIe 4.0 x8. Display outputs differ as well. The RX 9050 offers one HDMI 2.1b port and two DisplayPort 2.1a ports. The RTX 4060 Ti 16 GB offers one HDMI 2.1 port and three DisplayPort 1.4a ports.

Where Each One Wins

The RTX 4060 Ti 16 GB wins on raw compute throughput. Its FP32 rating is 22.06 TFLOPS, compared to 10.65 TFLOPS for the RX 9050, so the NVIDIA card delivers more than double the single-precision floating point performance. Its FP16 rating is also 22.06 TFLOPS at a 1:1 ratio, while the RX 9050 achieves 10.65 TFLOPS at 1:1. The texture fill rate favors NVIDIA as well: 344.8 GTexel/s against 166.4 GTexel/s. The RTX 4060 Ti 16 GB also has the tensor core advantage, with 136 tensor cores present on the NVIDIA card and none on the AMD card, which matters for workloads that leverage those units.

The RX 9050 wins on pixel throughput. Its pixel rate is 166.4 GPixel/s, compared to 121.7 GPixel/s for the RTX 4060 Ti 16 GB. That advantage comes from the AMD card having 64 ROPs versus 48 on the NVIDIA card. The RX 9050 also wins on power efficiency as measured by thermal design power. The AMD card draws 92 W, while the RTX 4060 Ti 16 GB draws 165 W. The RX 9050 delivers a substantial fraction of the NVIDIA card's pixel rate at roughly 56 percent of the power draw. The RX 9050 also uses a single 8-pin power connector, while the RTX 4060 Ti 16 GB requires a single 16-pin connector. The suggested power supply for the RX 9050 is 250 W, versus 450 W for the RTX 4060 Ti 16 GB.

Memory configuration is a split decision. Both cards use GDDR6 memory on a 128-bit bus with 288.0 GB/s of bandwidth. The RTX 4060 Ti 16 GB has 16 GB of memory, double the 8 GB on the RX 9050. For memory-heavy workloads, the NVIDIA card holds a clear capacity advantage. The RX 9050 counters with a more modern display interface, supporting DisplayPort 2.1a versus DisplayPort 1.4a on the NVIDIA card.

The RX 9050 also wins on process technology density and the bandwidth of the bus interface. The AMD card uses PCIe 5.0 x16, while the NVIDIA card uses PCIe 4.0 x8. The RX 9050 transistor density of 149.2 million per square millimeter exceeds the 121.8 million per square millimeter of the RTX 4060 Ti 16 GB.

Specification Differences

The two cards differ across nearly every major specification category. The RX 9050 uses RDNA 4.0 on a 4 nm process, while the RTX 4060 Ti 16 GB uses Ada Lovelace on a 5 nm process. Transistor counts are 29,700 million versus 22,900 million. Die sizes are 199 mm² versus 188 mm². Transistor density is 149.2 million per square millimeter versus 121.8 million per square millimeter.

Base clocks diverge sharply: 1330 MHz for the RX 9050 versus 2310 MHz for the RTX 4060 Ti 16 GB. Boost clocks are closer: 2600 MHz versus 2535 MHz. The RX 9050 lists a game clock of 1920 MHz, which the NVIDIA card does not have. Memory clocks are identical at 2250 MHz with 18 Gbps effective.

Memory size is 8 GB versus 16 GB. Memory type, bus width, and bandwidth are identical: GDDR6, 128 bit, 288.0 GB/s. Shading units are 1024 versus 4352. TMUs are 64 versus 136. ROPs are 64 versus 48. Ray tracing cores are 16 versus 34. Tensor cores are absent on the AMD card and present at 136 on the NVIDIA card.

Pixel rate is 166.4 GPixel/s versus 121.7 GPixel/s. Texture rate is 166.4 GTexel/s versus 344.8 GTexel/s. FP32 is 10.65 TFLOPS versus 22.06 TFLOPS. FP16 is 10.65 TFLOPS versus 22.06 TFLOPS, both at 1:1.

TDP is 92 W versus 165 W. Power connectors are 1x 8-pin versus 1x 16-pin. Suggested PSU is 250 W versus 450 W. Bus interface is PCIe 5.0 x16 versus PCIe 4.0 x8. Display outputs are 1x HDMI 2.1b and 2x DisplayPort 2.1a versus 1x HDMI 2.1 and 3x DisplayPort 1.4a.

Production status is Active versus End-of-life. Release dates differ by roughly three years, with the RX 9050 released on 2026-07-27 and the RTX 4060 Ti 16 GB released on 2023-05-17. The RTX 4060 Ti 16 GB has a launch MSRP of 499 USD. The RX 9050 has no launch MSRP recorded. Physical dimensions are recorded only for the NVIDIA card: 240 mm length, 111 mm height, and 40 mm width. The RX 9050 has no dimensions listed.

FAQ

Q: Which card has more memory?

A: The NVIDIA GeForce RTX 4060 Ti 16 GB has 16 GB of GDDR6 memory, while the AMD Radeon RX 9050 has 8 GB. Both use a 128-bit bus with 288.0 GB/s bandwidth.

Q: How does power consumption compare?

A: The RX 9050 has a TDP of 92 W and a suggested PSU of 250 W. The RTX 4060 Ti 16 GB has a TDP of 165 W and a suggested PSU of 450 W.

Q: Which card has higher raw compute performance?

A: The RTX 4060 Ti 16 GB has an FP32 rating of 22.06 TFLOPS, more than double the 10.65 TFLOPS of the RX 9050. It also has 4352 shading units versus 1024.

Q: Which card has better pixel throughput?

A: The RX 9050 has a pixel rate of 166.4 GPixel/s, compared to 121.7 GPixel/s for the RTX 4060 Ti 16 GB. The AMD card has 64 ROPs versus 48.

Q: What are the production statuses of these cards?

A: The RX 9050 is listed as Active production, released on 2026-07-27. The RTX 4060 Ti 16 GB is listed as End-of-life, released on 2023-05-17.

Q: Do both cards support the same APIs?

A: Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. They differ on bus interface, with the RX 9050 using PCIe 5.0 x16 and the RTX 4060 Ti 16 GB using PCIe 4.0 x8.

The Verdict

The recorded data does not include a benchmark score for the RX 9050, so no measured performance comparison can be drawn from the database. The RTX 4060 Ti 16 GB has a single 3DMark Steel Nomad DX12 score of 2907, placing it in the 18th percentile of all GPUs, with nearest rivals all within 0.5 percent of its score.

From specifications alone, the RTX 4060 Ti 16 GB is the stronger card for compute-heavy tasks. It offers more than double the FP32 throughput, more than four times the shading units, more than double the TMUs, more ray tracing cores, dedicated tensor cores, and twice the memory capacity at 16 GB. Its 22.06 TFLOPS FP32 rating and 344.8 GTexel/s texture rate clearly outclass the RX 9050 on paper.

The RX 9050 is the more efficient card. Its 92 W TDP against 165 W, its 250 W suggested PSU against 450 W, and its higher pixel rate of 166.4 GPixel/s against 121.7 GPixel/s show that AMD concentrated on output per watt. The RX 9050 also has the newer display outputs, with DisplayPort 2.1a versus DisplayPort 1.4a, and the faster PCIe 5.0 x16 interface versus PCIe 4.0 x8. Its 4 nm process delivers 149.2 million transistors per square millimeter, a higher density than the 121.8 million on the NVIDIA card.

The RTX 4060 Ti 16 GB is end-of-life, while the RX 9050 remains active. The NVIDIA card had a launch MSRP of 499 USD. The RX 9050 has no launch MSRP recorded. For a builder prioritizing compute throughput, memory capacity, and ray tracing resources, the RTX 4060 Ti 16 GB specification sheet leads. For a builder prioritizing power draw, pixel fill, and modern connectivity, the RX 9050 presents the stronger profile. Without a recorded benchmark score for the RX 9050, the database cannot confirm how the architectural trade-offs translate into real performance.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9050
RTX 4060 Ti 16 GB
Core Specs
Shading Units
1,024
4,352 +325.0%
Shaders
1,024
4,352 +325.0%
TMUs
64
136 +112.5%
ROPs
64
48 -25.0%
Compute Units
16
—
SM Count
—
34
Clocks
Base Clock
1330 MHz
2310 MHz
Boost Clock
2600 MHz
2535 MHz
Game Clock
1920 MHz
—
Memory Clock
2250 MHz 18 Gbps effective
2250 MHz 18 Gbps effective
Memory
Memory Size
8 GB
16 GB
VRAM (MB)
8,192
16,384 +100.0%
Memory Type
GDDR6
GDDR6
Memory Bus
128 bit
128 bit
Bandwidth
288.0 GB/s
288.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
4 MB
32 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
166.4 GPixel/s
121.7 GPixel/s
Texture Rate
166.4 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
10.65 TFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
332.8 GFLOPS (1:32)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
10.65 TFLOPS (1:1)
22.06 TFLOPS (1:1)
AI/RT
RT Cores
16
34 +112.5%
Tensor Cores
—
136
Matrix Cores
32
—
Power
TDP
92 W
165 W
TDP (W)
92
165 +79.3%
Suggested PSU
250 W
450 W
Power Connectors
1x 8-pin
1x 16-pin
Architecture
Architecture
RDNA 4.0
Ada Lovelace
GPU Name
Navi 44
AD106
Generation
Navi IV (RX 9000)
GeForce 40
Process Size
4 nm
5 nm
Transistors
29,700 million
22,900 million
Die Size
199 mm²
188 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
121.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
8.9
Shader Model
6.9
6.8
Physical
Slot Width
Dual-slot
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 5.0 x16
PCIe 4.0 x8
Other
Launch Price
—
499 USD
Production
Active
End-of-life
Predecessor
Navi III
GeForce 30
Successor
—
GeForce 50
View Radeon RX 9050 Details View GeForce RTX 4060 Ti 16 GB Details