NVIDIA GeForce RTX 4060 AD106 vs NVIDIA GeForce RTX 4060 Ti 8 GB Comparison

NVIDIA
GEFORCE

NVIDIA GeForce RTX 4060 AD106

CORE STATE AD106
VRAM 8 GB
CLOCK SPEED 2460 MHz
TDP 115 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti 8 GB

CORE STATE AD106
VRAM 8 GB
CLOCK SPEED 2535 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2023

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
2,913

Analysis: NVIDIA GeForce RTX 4060 AD106 vs NVIDIA GeForce RTX 4060 Ti 8 GB

The Verdict

The data in the database places the two cards at very different points in the performance spectrum. The GeForce RTX 4060 Ti 8 GB delivers a recorded 3DMark Steel Nomad DX12 score of 2913, which puts it at the 19th percentile among all GPUs. The RTX 4060 AD106, by contrast, sits at the 50th percentile, but it has no recorded benchmark score in the database. This means the Ti model is the only one with a measurable performance datapoint, and that datapoint shows it trading blows with a very narrow set of rivals: it is 0.1% ahead of the NVIDIA RTX PRO 4000 Blackwell SFF (2910), 0.2% ahead of the RTX 4060 Ti 16 GB (2907), 0.7% ahead of the RTX 4010 (2893), and 0.3% behind the Quadro P600 (2923). For a buyer who needs a card with a confirmed score, the RTX 4060 Ti 8 GB is the only choice between these two, as the AD106 has no benchmark entries to compare. The AD106, with its lower specs across the board, would logically fall behind, but without a score, the database cannot confirm by how much. The Ti also launched with a manufacturer suggested price of 399 USD, which the AD106 lacks entirely.

Architecture Differences

Both cards share the same fundamental architecture: Ada Lovelace, built on the AD106 chip, fabricated on a 5 nm process at TSMC. Both have the same transistor count of 22,900 million and the same die size of 188 mm², yielding an identical transistor density of 121.8M per mm². The architectural split comes in the execution resources. The RTX 4060 AD106 uses 3072 shading units, 96 texture mapping units, and 48 ROPs. The RTX 4060 Ti 8 GB raises those counts to 4352 shading units, 136 texture mapping units, and 48 ROPs. The Ti also carries more ray tracing cores (34 versus 24) and more tensor cores (136 versus 96). Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and both use a PCIe 4.0 x8 bus interface. The display outputs are identical: 1x HDMI 2.1 and 3x DisplayPort 1.4a. Both are dual-slot cards, but the Ti is the only one with listed physical dimensions: 240 mm in length, 111 mm in height, and 40 mm in width. The power delivery differs, with the AD106 using a single 12-pin connector and the Ti using a single 16-pin connector. The AD106 draws 115 W and recommends a 300 W PSU, while the Ti draws 160 W and recommends a 450 W PSU. Both are end-of-life products, with the AD106 released in March 2024 and the Ti released in May 2023. Both are successors to the GeForce 30 series and predecessors to the GeForce 50 series.

Head-to-Head Benchmarks

The head-to-head benchmark table in the database is empty, so there are no direct comparison scores between these two specific cards. The only recorded benchmark belongs to the RTX 4060 Ti 8 GB: a 3DMark Steel Nomad DX12 score of 2913. That score places it at the 19th percentile overall, meaning 81% of all GPUs in the database score higher. The nearest rivals confirm how tight the cluster is at this performance level. The RTX PRO 4000 Blackwell SFF scores 2910, which is 0.1% lower. The RTX 4060 Ti 16 GB scores 2907, which is 0.2% lower. The RTX 4010 scores 2893, which is 0.7% lower. The Quadro P600 scores 2923, which is 0.3% higher. These deltas are all within a single percentage point, so the Ti 8 GB sits in a very dense performance band. Because the AD106 has no benchmark score, the database cannot produce any win for either card in a head-to-head matchup. The wins counter shows 0 for both. The only conclusion from the recorded data is that the Ti 8 GB is a mid-pack performer within its immediate peer group, and the AD106 remains unquantified. The FP32 compute rates suggest a wide gap: the AD106 delivers 15.11 TFLOPS, while the Ti delivers 22.06 TFLOPS, which is roughly 46% higher on paper. The texture rate also differs substantially: 236.2 GTexel/s for the AD106 versus 344.8 GTexel/s for the Ti. But these are specification-level differences, not benchmark results, so they do not translate into a confirmed win in the database.

FAQ

Q: Which card has a higher recorded benchmark score?

A: Only the GeForce RTX 4060 Ti 8 GB has a recorded score: 2913 in 3DMark Steel Nomad DX12. The RTX 4060 AD106 has no benchmark entries in the database.

Q: How does the RTX 4060 Ti 8 GB compare to its closest rivals?

A: It is 0.1% ahead of the RTX PRO 4000 Blackwell SFF (2910), 0.2% ahead of the RTX 4060 Ti 16 GB (2907), 0.7% ahead of the RTX 4010 (2893), and 0.3% behind the Quadro P600 (2923).

Q: Do the two cards use the same chip?

A: Yes, both use the AD106 chip with Ada Lovelace architecture, 22,900 million transistors, a 188 mm² die, and a 5 nm TSMC process.

Q: What is the memory configuration for each card?

A: Both have 8 GB of GDDR6 memory on a 128-bit bus. The AD106 has a memory clock of 2125 MHz (17 Gbps effective) and 272.0 GB/s bandwidth. The Ti has a memory clock of 2250 MHz (18 Gbps effective) and 288.0 GB/s bandwidth.

Q: What are the power requirements?

A: The RTX 4060 AD106 draws 115 W with a suggested 300 W PSU and a 12-pin connector. The RTX 4060 Ti 8 GB draws 160 W with a suggested 450 W PSU and a 16-pin connector.

Q: Which card has more shading units and ray tracing cores?

A: The RTX 4060 Ti 8 GB has 4352 shading units and 34 ray tracing cores. The RTX 4060 AD106 has 3072 shading units and 24 ray tracing cores.

Where Each One Wins

The database gives the RTX 4060 Ti 8 GB every measurable win. It has a benchmark score, while the AD106 has none. It has a higher FP32 compute rate, 22.06 TFLOPS versus 15.11 TFLOPS. It has a higher texture rate, 344.8 GTexel/s versus 236.2 GTexel/s. It has a higher pixel rate, 121.7 GPixel/s versus 118.1 GPixel/s. It has more shading units, more TMUs, more ray tracing cores, and more tensor cores. It has faster memory, with 18 Gbps effective speed and 288.0 GB/s bandwidth versus 17 Gbps and 272.0 GB/s. It also has higher base and boost clocks, 2310 MHz and 2535 MHz versus 1830 MHz and 2460 MHz. The AD106 wins only on power efficiency, with a 115 W TDP versus 160 W, and a lower PSU recommendation of 300 W versus 450 W. It also uses a smaller power connector, 12-pin versus 16-pin. In terms of physical footprint, the AD106 has no listed dimensions, so the Ti is the only card with a confirmed size. The AD106 has a higher percentile ranking (50th versus 19th), but that percentile is based on all GPUs, not on a direct score, so it does not reflect a confirmed performance win. The Ti also has a launch MSRP of 399 USD, while the AD106 has none listed.

Specification Differences

The two cards differ in several specification fields. The base clock is 1830 MHz for the AD106 and 2310 MHz for the Ti. The boost clock is 2460 MHz versus 2535 MHz. The memory clock is 2125 MHz (17 Gbps effective) versus 2250 MHz (18 Gbps effective). The memory bandwidth is 272.0 GB/s versus 288.0 GB/s. Shading units are 3072 versus 4352. TMUs are 96 versus 136. ROPs are the same at 48. Ray tracing cores are 24 versus 34. Tensor cores are 96 versus 136. Pixel rate is 118.1 GPixel/s versus 121.7 GPixel/s. Texture rate is 236.2 GTexel/s versus 344.8 GTexel/s. FP32 is 15.11 TFLOPS versus 22.06 TFLOPS. FP16 is 15.11 TFLOPS (1:1) versus 22.06 TFLOPS (1:1). TDP is 115 W versus 160 W. Power connector is 1x 12-pin versus 1x 16-pin. Suggested PSU is 300 W versus 450 W. The Ti has physical dimensions (240 mm length, 111 mm height, 40 mm width), while the AD106 has none. The release dates differ: March 2024 for the AD106 and May 2023 for the Ti. The Ti has a launch MSRP of 399 USD; the AD106 has none. Both share the same memory size (8 GB), type (GDDR6), bus width (128 bit), process node (5 nm), foundry (TSMC), transistor count, die size, transistor density, bus interface (PCIe 4.0 x8), display outputs, API support, slot width, production status, generation, series, manufacturer, architecture, chip, predecessor, and successor.

DETAILED SPECIFICATIONS

SPECIFICATION
RTX 4060 AD106
RTX 4060 Ti 8 GB
Core Specs
Shading Units
3,072
4,352 +41.7%
Shaders
3,072
4,352 +41.7%
TMUs
96
136 +41.7%
ROPs
48
48 0.0%
SM Count
24
34 +41.7%
Clocks
Base Clock
1830 MHz
2310 MHz
Boost Clock
2460 MHz
2535 MHz
Memory Clock
2125 MHz 17 Gbps effective
2250 MHz 18 Gbps effective
Memory
Memory Size
8 GB
8 GB
VRAM (MB)
8,192
8,192 0.0%
Memory Type
GDDR6
GDDR6
Memory Bus
128 bit
128 bit
Bandwidth
272.0 GB/s
288.0 GB/s
Cache
L1 Cache
128 KB (per SM)
128 KB (per SM)
L2 Cache
24 MB
32 MB
Performance
Pixel Rate
118.1 GPixel/s
121.7 GPixel/s
Texture Rate
236.2 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
15.11 TFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
236.2 GFLOPS (1:64)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
15.11 TFLOPS (1:1)
22.06 TFLOPS (1:1)
AI/RT
RT Cores
24
34 +41.7%
Tensor Cores
96
136 +41.7%
Power
TDP
115 W
160 W
TDP (W)
115
160 +39.1%
Suggested PSU
300 W
450 W
Power Connectors
1x 12-pin
1x 16-pin
Architecture
Architecture
Ada Lovelace
Ada Lovelace
GPU Name
AD106
AD106
Generation
GeForce 40
GeForce 40
Process Size
5 nm
5 nm
Transistors
22,900 million
22,900 million
Die Size
188 mm²
188 mm²
Foundry
TSMC
TSMC
Density
121.8M / mm²
121.8M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
8.9
8.9
Shader Model
6.9
6.8
Physical
Slot Width
Dual-slot
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
1x HDMI 2.13x DisplayPort 1.4a
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x8
PCIe 4.0 x8
Other
Launch Price
—
399 USD
Production
End-of-life
End-of-life
Predecessor
GeForce 30
GeForce 30
Successor
GeForce 50
GeForce 50
View GeForce RTX 4060 AD106 Details View GeForce RTX 4060 Ti 8 GB Details