AMD Radeon PRO W7800 vs NVIDIA B300 SXM6 AC Comparison
AMD Radeon PRO W7800
B300 SXM6 AC
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon PRO W7800 vs NVIDIA B300 SXM6 AC
The Verdict
The data presents a stark contrast between two professional GPUs aimed at entirely different segments. The NVIDIA B300 SXM6 AC is a data-center accelerator with a single benchmark score of 369,831 in Geekbench OpenCL, placing it in the 100th percentile of all GPUs. Its nearest rival, the NVIDIA B200, scores 345,482, which is 7% lower, while the AMD Instinct MI300X trails by 16.3% with a score of 317,994. This is a compute monster designed for massive parallel workloads where raw throughput and memory capacity dominate.
The AMD Radeon PRO W7800, by contrast, is a workstation card with an average benchmark score of 164,894 across OpenCL and Vulkan tests, placing it in the 97th percentile. Its nearest rival, the NVIDIA RTX 4500 Ada Generation, scores 166,094, a mere 0.7% difference, indicating a tightly contested mid-range professional field. The W7800 also carries a launch MSRP of 2,499 USD. The verdict is clear: the B300 is for compute-heavy server deployments, while the W7800 is for professional visualization and content creation where display outputs and API support are essential.
Architecture Differences
The architectural gap between these two parts is fundamental. The NVIDIA B300 SXM6 AC is built on the Blackwell Ultra architecture with the GB110 chip, fabricated on a 5 nm process at TSMC. This chip packs 208,000 million transistors on a 1628 mm² die, yielding a transistor density of 127.8M per mm². The B300 is part of the Server Blackwell (Bxx) generation, succeeding Server Hopper and preceding Server Rubin. It has no display outputs, no DirectX, OpenGL, or Vulkan API support, and uses an SXM Module slot width with a PCIe 6.0 x16 bus interface. This is a pure compute accelerator with no graphics capabilities.
The AMD Radeon PRO W7800 uses the RDNA 3.0 architecture with the Navi 31 chip, codenamed Plum Bonito, also on a 5 nm TSMC process. It contains 57,700 million transistors on a 529 mm² die, with a transistor density of 109.1M per mm². This is a Radeon Pro Navi (Navi III Series) product, succeeding Radeon Pro Vega. It sports 3x DisplayPort 2.1 and 1x mini-DisplayPort 2.1 outputs, supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and fits in a dual-slot form factor with 2x 8-pin power connectors. The W7800 is a full-featured workstation GPU, whereas the B300 is a headless server part.
Head-to-Head Benchmarks
In the sole head-to-head benchmark available, Geekbench OpenCL, the NVIDIA B300 SXM6 AC achieves a score of 369,831 against the AMD Radeon PRO W7800's 154,366. This represents a delta of 139.6%, meaning the B300 is more than 2.4 times faster in this specific test. This is a decisive victory for NVIDIA, reflecting the B300's massive shading unit count of 18,944 versus the W7800's 4,480, as well as its 8.19 TB/s memory bandwidth compared to 576.0 GB/s.
The B300's advantage extends to its nearest rivals as well. It leads the NVIDIA B200 by 7%, the NVIDIA H200 NVL by 10.4%, and the AMD Instinct MI300X by 16.3%. The W7800, meanwhile, sits in a much tighter cluster: it is 1.5% ahead of the NVIDIA A100 PCIe 40 GB, but 0.2% behind the NVIDIA RTX A5500, 0.7% behind the RTX 4500 Ada Generation, and 2.2% behind the AMD Radeon Pro W6900X. These numbers suggest that while the B300 dominates in absolute compute, the W7800 is competitive within its own performance tier.
Specification Differences
The two GPUs diverge sharply across nearly every specification. The NVIDIA B300 SXM6 AC has 288 GB of HBM3e memory on an 8192-bit bus, delivering 8.19 TB/s of bandwidth. The AMD Radeon PRO W7800 has 32 GB of GDDR6 memory on a 256-bit bus, providing 576.0 GB/s. This is a 9x difference in memory capacity and a 14x difference in bandwidth. The B300's memory clock is 2000 MHz (8 Gbps effective), while the W7800's is 2250 MHz (18 Gbps effective), but the W7800's narrower bus limits its overall throughput.
Base and boost clocks favor the AMD part: the W7800 runs at 1895 MHz base and 2525 MHz boost, versus the B300's 1665 MHz base and 2032 MHz boost. However, the B300 compensates with far more execution resources. It has 18,944 shading units, 592 TMUs, and 24 ROPs, while the W7800 has 4,480 shading units, 280 TMUs, and 128 ROPs. The B300 also features 592 tensor cores, whereas the W7800 has 70 ray tracing cores and no tensor cores. Pixel rate is dramatically higher on the W7800 at 323.2 GPixel/s versus 48.77 GPixel/s, but texture rate is higher on the B300 at 1,202.9 GTexel/s versus 707.0 GTexel/s.
FP32 throughput is 76.99 TFLOPS on the B300 versus 45.25 TFLOPS on the W7800. FP16 performance is identical to FP32 on the B300 (76.99 TFLOPS, 1:1 ratio), while the W7800 reaches 90.50 TFLOPS at a 2:1 ratio. Power consumption differs massively: the B300 has a TDP of 1100 W with a suggested PSU of 1500 W, while the W7800 has a TDP of 260 W and a suggested PSU of 600 W. The B300 uses a PCIe 6.0 x16 interface; the W7800 uses PCIe 4.0 x16. The W7800 measures 280 mm in length, 110 mm in height, and 40 mm in width. The B300's dimensions are not provided. Release dates also differ: the B300 launched on 2025-09-10, while the W7800 launched on 2023-04-12.
FAQ
Q: Which GPU is faster in Geekbench OpenCL, and by how much?
A: The NVIDIA B300 SXM6 AC scores 369,831, which is 139.6% higher than the AMD Radeon PRO W7800's 154,366 in the same test.
Q: How does the B300 compare to its closest rivals?
A: The B300 leads the NVIDIA B200 by 7% (345,482), the NVIDIA H200 NVL by 10.4% (334,891), and the AMD Instinct MI300X by 16.3% (317,994).
Q: How does the W7800 compare to its closest rivals?
A: The W7800's average score of 164,894 puts it 1.5% ahead of the NVIDIA A100 PCIe 40 GB (162,504), but 0.2% behind the NVIDIA RTX A5500 (165,217), 0.7% behind the RTX 4500 Ada Generation (166,094), and 2.2% behind the AMD Radeon Pro W6900X (168,574).
Q: What are the memory capacities and types?
A: The B300 has 288 GB of HBM3e with 8.19 TB/s bandwidth on an 8192-bit bus. The W7800 has 32 GB of GDDR6 with 576.0 GB/s bandwidth on a 256-bit bus.
Q: Do both GPUs support display outputs?
A: No. The B300 has no outputs and no DirectX, OpenGL, or Vulkan API support. The W7800 has 3x DisplayPort 2.1 and 1x mini-DisplayPort 2.1, plus DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 support.
Q: What is the power requirement difference?
A: The B300 has a TDP of 1100 W and a suggested PSU of 1500 W. The W7800 has a TDP of 260 W and a suggested PSU of 600 W.