AMD Radeon PRO W7500 vs NVIDIA GeForce RTX 5090 D V2 Comparison

AMD
RADEON

AMD Radeon PRO W7500

CORE STATE Navi 33
VRAM 8 GB
CLOCK SPEED 1700 MHz
TDP 70 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 3.0
nm
PROCESS 6 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

GeForce RTX 5090 D V2

CORE STATE GB202
VRAM 24 GB
CLOCK SPEED 2407 MHz
TDP 575 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
58,213
N/A
geekbench_vulkan
68,634
N/A
passmark_directx_10
65
N/A
passmark_directx_11
125
N/A
passmark_directx_12
46
N/A
passmark_directx_9
200
N/A
passmark_g2d
1,174
N/A
passmark_g3d
13,368
N/A
passmark_gpu_compute
5,910
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
16,504

Analysis: AMD Radeon PRO W7500 vs NVIDIA GeForce RTX 5090 D V2

The data places the NVIDIA GeForce RTX 5090 D V2 and AMD Radeon PRO W7500 in the same performance tier, separated by a razor-thin margin in the 3DMark Steel Nomad DX12 test. The RTX 5090 D V2 scores 16,504, while the Radeon PRO W7500 achieves 16,415, a difference of only 0.5%. Both cards sit at the 59th percentile among all GPUs. Despite this near-identical average benchmark result, the two products are engineered for entirely different purposes, with the RTX 5090 D V2 being a massive, power-hungry flagship and the W7500 a compact, efficient workstation card.

Head-to-Head Benchmarks

The only directly comparable benchmark in the data is the 3DMark Steel Nomad DX12 test. The NVIDIA GeForce RTX 5090 D V2 posts a score of 16,504, edging out the AMD Radeon PRO W7500’s 16,415. This translates to a 0.5% lead for the NVIDIA card, a margin that falls well within typical run-to-run variance and is effectively a statistical tie. Interestingly, the AMD card’s nearest rival list shows the RTX 5090 D V2 with a deltaPct of -0.5%, confirming the lead from the NVIDIA perspective.

The AMD Radeon PRO W7500 has a much larger benchmark suite available, including Geekbench OpenCL and Vulkan scores of 58,213 and 68,634, respectively. It also has Passmark scores covering DirectX 9 (200), DirectX 10 (65), DirectX 11 (125), DirectX 12 (46), G2D (1,174), G3D (13,368), and GPU Compute (5,910). These results show the W7500’s strengths in compute-heavy OpenCL workloads relative to its DirectX gaming scores, which are modest. However, without corresponding benchmark data for the RTX 5090 D V2 in these same tests, a direct comparison is impossible.

The RTX 5090 D V2’s single benchmark result of 16,504 in Steel Nomad places it just ahead of the NVIDIA T400 (16,508, 0% delta), the AMD Radeon PRO W7500 (16,415, 0.5% delta), the NVIDIA RTX PRO 6000 Blackwell (16,408, 0.6% delta), and the AMD Radeon RX 5700 XT (16,361, 0.9% delta). The W7500’s nearest rivals include the NVIDIA RTX PRO 6000 Blackwell (16,408, 0% delta), AMD Radeon RX 5700 XT (16,361, 0.3% delta), AMD Radeon Pro 5600M (16,351, 0.4% delta), and the RTX 5090 D V2 (16,504, -0.5% delta). This cluster of scores, all within 0.9% of each other, suggests that the Steel Nomad test is not differentiating between these very different architectures at this performance level.

FAQ

Q: Which GPU has a higher average benchmark score?

A: The NVIDIA GeForce RTX 5090 D V2 has an average benchmark score of 16,504, which is 0.5% higher than the AMD Radeon PRO W7500’s average score of 16,415.

Q: How do the two cards compare in terms of memory bandwidth?

A: The NVIDIA card offers dramatically higher memory bandwidth at 1.34 TB/s, while the AMD card provides 256.0 GB/s. This represents a significant advantage for the RTX 5090 D V2 in bandwidth-intensive tasks.

Q: What is the difference in FP32 compute performance?

A: The RTX 5090 D V2 delivers 104.8 TFLOPS of FP32 performance, which is roughly 8.6 times higher than the Radeon PRO W7500’s 12.19 TFLOPS.

Q: Which card has a smaller physical footprint?

A: The AMD Radeon PRO W7500 is the smaller card, measuring 216 mm in length, 115 mm in height, and 20 mm in width, and it occupies a single slot. The NVIDIA card is 304 mm long, 137 mm high, and 48 mm wide, taking up two slots.

Q: What are the power supply requirements for each card?

A: The RTX 5090 D V2 has a TDP of 575 W and requires a 950 W power supply with a 1x 16-pin connector. The Radeon PRO W7500 has a TDP of only 70 W and needs just a 250 W power supply, with no external power connectors.

Q: Do both cards support the same API versions?

A: Yes, both the NVIDIA GeForce RTX 5090 D V2 and AMD Radeon PRO W7500 support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Architecture Differences

The NVIDIA GeForce RTX 5090 D V2 is built on the Blackwell 2.0 architecture using the GB202 chip, manufactured on a 5 nm process at TSMC. It contains 92,200 million transistors on a 750 mm² die, yielding a transistor density of 122.9 million per mm². The AMD Radeon PRO W7500 uses the RDNA 3.0 architecture with the Navi 33 chip, codenamed "Hotpink Bonefish," on a 6 nm TSMC process. It has 13,300 million transistors on a 204 mm² die, with a density of 65.2 million per mm².

Core configurations differ massively. The RTX 5090 D V2 features 21,760 shading units, 680 TMUs, 176 ROPs, 170 RT cores, and 680 tensor cores. The W7500 has 1,792 shading units, 112 TMUs, 64 ROPs, and 28 RT cores, with no tensor cores listed. Memory subsystems are also divergent: the NVIDIA card uses 24 GB of GDDR7 on a 384-bit bus, while the AMD card has 8 GB of GDDR6 on a 128-bit bus.

Clock speeds and interface standards further distinguish them. The RTX 5090 D V2 runs at a base of 2017 MHz and boosts to 2407 MHz, with memory at 1750 MHz (28 Gbps effective). The W7500 has a 1500 MHz base and 1700 MHz boost, with memory at 2000 MHz (16 Gbps effective). The NVIDIA card uses PCIe 5.0 x16, whereas the AMD card uses PCIe 4.0 x8. The RTX 5090 D V2 was released on 2025-08-14, while the W7500 launched earlier on 2023-08-02.

The Verdict

The benchmark data indicates that in the 3DMark Steel Nomad DX12 test, the two cards are functionally equivalent, with the RTX 5090 D V2 holding a negligible 0.5% advantage. However, the specification sheet tells a completely different story. The RTX 5090 D V2 is a behemoth designed for maximum compute throughput, with nearly 8.6 times the FP32 performance, 17 times the memory bandwidth, and three times the VRAM capacity of the W7500. Its 575 W TDP, dual-slot cooler, and 950 W suggested PSU underscore its role as a high-performance part.

The AMD Radeon PRO W7500 is the antithesis: a 70 W, single-slot, passive-cooled card that draws power directly from the PCIe slot. It offers 8 GB of VRAM and 256.0 GB/s of bandwidth, which is modest but sufficient for its intended professional workloads. Its smaller die, lower power draw, and earlier release date suggest it targets a different segment of the market. The data shows that while these cards compete in one synthetic benchmark, they are not true rivals in capability or purpose. The RTX 5090 D V2 is the clear choice for users who need raw compute power, while the W7500 is for those who prioritize space, power efficiency, and adequate performance for lighter tasks.

Specification Differences

The two cards differ in nearly every measurable specification. The RTX 5090 D V2 uses a 5 nm process versus the W7500’s 6 nm process. Transistor count is 92,200 million versus 13,300 million, and die size is 750 mm² versus 204 mm². Base clocks are 2017 MHz versus 1500 MHz, and boost clocks are 2407 MHz versus 1700 MHz. Memory configuration is 24 GB GDDR7 on a 384-bit bus versus 8 GB GDDR6 on a 128-bit bus, with bandwidth of 1.34 TB/s versus 256.0 GB/s.

Compute resources show the NVIDIA card with 21,760 shading units versus 1,792, 680 TMUs versus 112, 176 ROPs versus 64, 170 RT cores versus 28, and 680 tensor cores versus none. Pixel rate is 423.6 GPixel/s versus 108.8 GPixel/s, and texture rate is 1,636.8 GTexel/s versus 190.4 GTexel/s. FP32 performance is 104.8 TFLOPS versus 12.19 TFLOPS. The TDP is 575 W versus 70 W, and the suggested PSU is 950 W versus 250 W.

Physical dimensions vary: the RTX 5090 D V2 is 304 mm long, 137 mm high, and 48 mm wide, taking a dual-slot width. The W7500 is 216 mm long, 115 mm high, and 20 mm wide, in a single-slot format. Power connectors are a 1x 16-pin for NVIDIA versus none for AMD. Bus interface is PCIe 5.0 x16 versus PCIe 4.0 x8. Display outputs are 1x HDMI 2.1b and 3x DisplayPort 2.1b for NVIDIA versus 4x DisplayPort 2.1 for AMD. Release dates are 2025-08-14 versus 2023-08-02. The launch MSRP for the RTX 5090 D V2 is 2,299 USD, while the W7500 launched at 429 USD.

Where Each One Wins

The NVIDIA GeForce RTX 5090 D V2 wins decisively in scenarios demanding maximum compute and bandwidth. Its 104.8 TFLOPS FP32 throughput, 1.34 TB/s memory bandwidth, and 24 GB VRAM make it suitable for large datasets, complex 3D rendering, and AI-adjacent workloads that can use its 680 tensor cores. Its 170 RT cores and 423.6 GPixel/s pixel rate also give it an edge in ray-tracing and high-resolution rendering tasks. The PCIe 5.0 x16 interface ensures no bandwidth bottleneck from the host system.

The AMD Radeon PRO W7500 wins in deployment flexibility and power-constrained environments. Its 70 W TDP, single-slot design, and lack of external power connectors mean it can be installed in systems with minimal power delivery and space. Its 4x DisplayPort 2.1 outputs support multi-display configurations. The W7500’s 2:1 FP16 ratio (24.37 TFLOPS) suggests it handles FP16 workloads with greater relative efficiency compared to its FP32 performance. Its lower launch MSRP of 429 USD also represents a different market positioning, though pricing analysis is beyond the scope of this data. For users whose workloads fit within 8 GB of VRAM and who need a low-profile, low-power solution, the W7500 is the clear winner. For anyone needing the absolute maximum throughput the data shows, the RTX 5090 D V2 is the only choice, despite its 0.5% lead in the single shared benchmark.

DETAILED SPECIFICATIONS

SPECIFICATION
PRO W7500
RTX 5090 D V2
Core Specs
Shading Units
1,792
21,760 +1114.3%
Shaders
1,792
21,760 +1114.3%
TMUs
112
680 +507.1%
ROPs
64
176 +175.0%
Compute Units
28
—
SM Count
—
170
Clocks
Base Clock
1500 MHz
2017 MHz
Boost Clock
1700 MHz
2407 MHz
Memory Clock
2000 MHz 16 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
8 GB
24 GB
VRAM (MB)
8,192
24,576 +200.0%
Memory Type
GDDR6
GDDR7
Memory Bus
128 bit
384 bit
Bandwidth
256.0 GB/s
1.34 TB/s
Cache
L1 Cache
128 KB per Array
128 KB (per SM)
L2 Cache
2 MB
96 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
108.8 GPixel/s
423.6 GPixel/s
Texture Rate
190.4 GTexel/s
1,636.8 GTexel/s
FP32 (TFLOPS)
12.19 TFLOPS
104.8 TFLOPS
FP64 (TFLOPS)
380.8 GFLOPS (1:32)
1.637 TFLOPS (1:64)
FP16 (TFLOPS)
24.37 TFLOPS (2:1)
104.8 TFLOPS (1:1)
AI/RT
RT Cores
28
170 +507.1%
Tensor Cores
—
680
Matrix Cores
56
—
Power
TDP
70 W
575 W
TDP (W)
70
575 +721.4%
Suggested PSU
250 W
950 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
RDNA 3.0
Blackwell 2.0
GPU Name
Navi 33
GB202
Codename
Hotpink Bonefish
—
Generation
Radeon Pro Navi (Navi III Series)
GeForce 50
Process Size
6 nm
5 nm
Transistors
13,300 million
92,200 million
Die Size
204 mm²
750 mm²
Foundry
TSMC
TSMC
Density
65.2M / mm²
122.9M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
12.0
Shader Model
6.8
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
216 mm 8.5 inches
304 mm 12 inches
Height
115 mm 4.5 inches
137 mm 5.4 inches
Outputs
4x DisplayPort 2.1
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 4.0 x8
PCIe 5.0 x16
Other
Launch Price
429 USD
2,299 USD
Production
Active
Active
Predecessor
Radeon Pro Vega
GeForce 40
Successor
—
GeForce 60
View Radeon PRO W7500 Details View GeForce RTX 5090 D V2 Details